• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.647-655
• /
• 2008

This paper presents real-time algorithm for an ultrasonic Local Positioning System(LPS). An ultrasonic LPS consists of 4 transmitters and n receivers. Each transmitter transmits an sequential ultrasonic signal to avoid interference of ultrasonic signal. This method is a noneffective application for a fast object. Because receiver detects four sequential transmissive ultrasonic signal and calculates a position. This paper proposes the method which 4 transmitters transmit simultaneous ultrasonic signal and each transmitter distinguished by frequencies and codes. And Auto-Correlation Function(ACF) method separates codes from an ultrasonic echo signal which is interference of each transmitter's code. If the receiver uses only ACF method, it is difficult to implement real time application for increased computation. This paper implements LPS using dual frequencies and ACF method. Using dual frequencies reduces codes length. The reduced codes length save computation in ACF. To prove this algorithm by experiment, high performance DSP(digital signal processor) used. The result shows the performance of the designed system is good enough positioning.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.1
• /
• pp.14-25
• /
• 1995

The main contribution of this paper can be summarized in two items as follws. Firstly, a modelling of mobile communication channel with Rayleigh fading characteristics is presented. Actual signal environments can be approximated as being real measurements by a proper mathematical representation of fluctuation of channel parameters due to Doppler effect, that is determined by the relative speed between transmitter and receiver, and noises, that vary at each sampling time. Secondly, an alternative procedure of synthesizing an adaptive equalizers is presented for recovering original signals that have been corrupted through the modelled channel. In order to compute the optimal tap coefficients for a high speed data(512 k symbol/sec) on a real-time basis, the CGM that guarantees fast and stable convergency is adopted during the training period of each frame. The coefficients obtained by the CGM are used as initial values for the LMS algorithm to trace the optimal coefficients during the data period that vary at each sampling time due to the mobility and noise at the receiver. Using the modelling presented in this paper, distributions of received signal power in various signal environments are demonstrated. The performance of the eqalizer proposed in this paper is shown as a function of BER under the various signal circumstances of mobile communications.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.8
• /
• pp.301-306
• /
• 2003

This paper proposes a novel detection scheme using a radial basis function (RBF) network in a multi-input multi-output (MIMO) environment. In order to evaluate the performance of the proposed MIMO-RBF receiver, simulations are performed over the rich-scattering fading channel. Simulation results confirm that the proposed scheme shows the similar bit-error rate (BER) performance of a maximum likelihood detection (MLD) and outperforms Vertical-Bell Laboratories Layered Space-Time using minimum-mean-square-error nulling (VBLAST-MMSE) as well as VBLAST using zero-forcing nulling (VBLAST-ZF). Moreover, we investigate the effect on the performance of the number of RBF center with two modulation formats (BPSK and QPSK) and different number of transmit and receive antennas. The performance of the proposed detector is verified with respect to an initialization-rate of RBF centers.

• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.2
• /
• pp.45-51
• /
• 2014

GNSS has the disadvantage of being vulnerable to jamming, and thus, the necessity of jamming countermeasure techniques has gradually increased. Jamming countermeasure techniques can be divided into an anti-jamming technique and a jammer localization technique. Depending on the type of a jammer, applicable techniques and performance vary significantly. Using an appropriate jamming countermeasure technique, the effect of jamming on a GNSS receiver can be attenuated, and prompt action is enabled when estimating the location of a jammer. However, if an inappropriate jamming countermeasure technique is used, a GNSS receiver may not operate in the worst case. Therefore, jammer identification is a technique that is essential for proper action. In this study, a technique that identifies a jammer based on template matching was proposed. For template matching, analysis of a received jamming signal is required; and the signal analysis was performed using a spectral correlation function. Based on a simulation, it was shown that the proposed identification of jamming signals was possible at various JNR.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4797-4813
• /
• 2018

The transform domain communication system (Hereinafter referred to as TDCS) takes on numerous advantages, inclusive of anti-jamming and low probability of detection. Yet its application is confined by the consistent spectrum in the transmitter and receiver, which is not possible in the case of a huge distance exsits between them. In this paper, a TDCS based modified weighted fractional fourier transform (WFRFT) is proposed to solve the problem resulting from spectrum mismatching for TDCS application. The amplitude and phase information are incorporated with the TDCS signals and transmit to the receiver together in the wake of a modified WFRFT. The basic function and the TDCS signals shall be accessible to the receivers in the wake of an inverse WFRFT transform, which make sure that the original information can be demodulated properly. The system's reliability while transmitting signals with different modulation methods and with spectrum mismatching is demonstrated by bit error rate (BER). In the meantime, the constellations of the signals and the BER performances at the eavesdropper demonstrate the proposed system is better secured.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.3
• /
• pp.301-305
• /
• 2014

PURPOSE: The purpose of this study was to determine the optimal thresholds of serum lipid level related to hypertension according to age in Korean adults. METHODS: In total, 564 adults who visited the health examine center in general hospital were included. The blood pressure and lipid profiles of low density lipoprotein cholesterol(LDL), high density lipoprotein cholesterol (HDL), triglyceride(TG) were measured. Receiver operating characteristic (ROC) curve were used to establish optimal thresholds between blood pressure and lipid profiles. RESULTS: The optimal TG cutoff value were 110.50(mg/dl) in the 18-39 and 81.50(mg/dl) in the 40-59 age group, and optimal cutoff value of LDL were 126.50(mg/dl) in the 40-59 age group and 111.00(mg/dl) in the 60 and over age group. There was a negative correlation between HDL and hypertension, a higher HDL decreased hypertension. The optimal cutoff value of HDL was 49.50(mg/dl) in the 18-39 age group. CONCLUSION: The thresholds of hypertension were lower in LDL and TG with aging. This result indicated that elderly people needs to concern more about their lipid profiles to maintain healthy cardiovascular function.

• Journal of Korea Multimedia Society
• /
• v.10 no.3
• /
• pp.401-410
• /
• 2007

Multimedia streams transmitted through the Internet have a strict playback delay time. Multimedia data arriving aster the playback time cannot be played in the receiver and are discarded. Thus, this paper proposed a protocol, in which the multimedia stream server determines whether data can be played in the receiver before sending the data. The proposed model has a PSCTP sub-layer on top of existing PR-SCTP and decides whether to send data messages, which have come from the multimedia applicationserver, and which PR-SCTP stream the data will be sent to. In addition, the proposed model uses the differentiated retransmission function of PR-SCTP. We evaluated the performance of SCTP, PR-SCTP and PSCTP using NS2 simulator. According to the results of the evaluation, the PSCTP protocol decreased the volume of transmission and increased the video decodable ratio compared to other protocols.

• Journal of Korean Society for Geospatial Information Science
• /
• v.4 no.2 s.8
• /
• pp.79-90
• /
• 1996

It is well known that point positioning using a C/A-code receiver is severely biased by errors in pseudorange. This paper shows the procedures of quantitive analysis for several error elements and that some methods to monitor SA(selective availability) of witch process is not opened are proposed. It is possible to verify the effects of SA in the Doppler shift and receiver clock drift variation. Easy methods to reduce SA effects are to fit second order polynomials for the one and a linear function for the other. With periodic autocorrelation functions. SA effects are analyzed and first order Gauss-Markov process parameters are decided.

• The Korean Journal of Applied Statistics
• /
• v.33 no.5
• /
• pp.541-553
• /
• 2020

The receiver operating characteristic (ROC) curve is expressed as both sensitivity and specificity; in addition, some optimal thresholds using the ROC curve are also represented with both sensitivity and specificity. In addition to the sensitivity and specificity, the expected usefulness function is considered as disease prevalence and usefulness. In particular, partial the area under the ROC curve (AUC) on a certain range should be compared when the AUCs of the crossing ROC curves have similar values. In this study, partial AUCs representing high sensitivity and specificity are proposed by using sensitivity and specificity lines, respectively. Assume various distribution functions with ROC curves that are crossing and AUCs that have the same value. We propose a method to improve the discriminant power of the classification models while comparing the partial AUCs obtained using sensitivity and specificity lines.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.885-892
• /
• 2000

A multi-used detector(MUD) using a radial basis function(RBF) network is proposed in a multicarrier-code division multiple access (MC-CDMA) system. In the proposed scheme, a RBF network is connected to the frequency domain in order to effectively utilize the frequency diversity. Simulations have been performed over the frequency selective and multipath fading channel. From these simulations, the proposed receiver is verified to be used for making the performance improvement in combating near-far effects and increasing the number of active users. The system capacity is increaed about 1.8 times at a BER of $10^{-3}$ under a single cell when the proposed scheme is compared with MUD using a parallel interference canceller(PIC).