• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.3
• /
• pp.210-218
• /
• 2005

In the current global business environment, it is very important how to allocate products from the producer to buyers (or distributors). Sometimes some buyers can order more than pertinent demand due to inappropriate forecasting customers' orders. This is the big obstacle to the efficient allocation of products. If the producer can become aware of buyers' pertinent demand, it is possible to realize the high-level order fulfillment through the effective allocation of products. In this study, a new allocation policy is proposed considering buyers' demands. The backpropagation algorithm, one of algorithms in neural network theory, is used to find pertinent demands from the distributors' orders. In the experiment, an allocation policy considering buyers' demands outperforms previous allocation policies.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.205-207
• /
• 2001

In response to this inverter microwave oven has been developed to improve high speed cooking time & energy saving performance. The voltage resonating inverter has a defect in switching element that works at 5 or 6times higher than input voltage. Especially, it is very difficult to choose the switching device is very high for the 220 (V) commercial voltage. In this paper, it is proposed the optimum method to realize the turbo 1200(W) output power for microwave oven that is employed the 900(V) IGBT with decreasing operating voltage of the switching component by making the 220(V), 1000(W) inverter through the active clamp voltage resonating inverter.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.331-334
• /
• 2001

The voltage resonating inverter has a defect in switching element that works at 5 or 6times higher than input voltage. Especially, it is very difficult to choose the switching device is very high for the 220(V)commercial voltage. In this paper, it is proposed the optimum method to realize the turbo 2000(W) power for induction cooker that is employed the 900(V) IGBT with decreasing operating voltage of the switching component by making the 220(V), 1500(W) inverter through the claim mode voltage resonating inverter.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.5
• /
• pp.658-665
• /
• 1986

In this paper, we study a (condition interprete systdem CCIS) which is a general purpose inference system for building an expert system. Previously, most expert systems used fragmentary knowledge-representation and inexact inferencing methods. To solve the proboems of those systems we suggest an algorithm for more flexible deduction and a method of representing knowledge more naturally and consistently compared to those of other experst systems. The CIS is a systsdem which can infer all the current situations from communication with the user based on user discription of some situation. we used some medical data on hypertension and its complication to simulate the system and to prove the effectiveness of the system. The results show that with the proposed method one can realize an attractive expert system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.2
• /
• pp.109-114
• /
• 2015

We realize a color reflective display without any color filter and sub-pixelation concept, by which the full or single color realization is basically impossible. In this study, we use a 3-electrode on the lower substrate with indium tin oxide (ITO) glass. The width of a rib is $30{\mu}m$, a cell size is $150{\mu}m{\times}150{\mu}m$, and the space of lower electrodes is $10{\mu}m$. To get the single color, we drive this panel by a identical algorithm based on the movement of charged particle in color fluid within a cell with hermetic seal. According to the driving method, the lifetime of panel is different.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.322-327
• /
• 1999

In most railway vehicle applications, a single phase AC/DC converter is used greatly and is essential equipment for Korea High Speed Train. A diode bridge rectifier and a phase-controlled thyristor bridge rectifier generate harmonics in power system. Nowadays, power factor and harmonics become major issue in electrical equipment for railway vehicle. Many researchers have been trying to improve the power factor and ac-side harmonics. Therefore the PWM converter is used to operate at unity Power factor and to reduce ac-side current harmonics. This paper describes the circuit for AC/DC PWM converter of Korea High Speed Train and proposes control algorithm to realize the sinusolidal input current waveform and the effective unity power factor. The validity of the proposed control method is verified through the experimental result.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.9
• /
• pp.850-855
• /
• 2006

This is concerned with the development and design of automatic maneuvering system using Differential Global Positioning System(DGPS). To achievement of autonomous maneuvering controller for giant ship, first, we investigated automatic maneuvering controller using DGPS in motor car. The sensors are configured with DGPS and digital compass. We calculated velocity and steering angle of motor car based on sensor signal. To design the controller, we derived the bicycle model and developed critically damped controller. The critically damped controller can be tracing previously appointed position in the fastest time. We are used a laptop computer to realize and the control algorithm is programmed by visual basic software. The obtained experimental results from developed system show unmanned motor car is good tracing planed positions. Hence, the system is looking forward to use the autonomous maneuvering control fur giant ship.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.6 no.3
• /
• pp.23-31
• /
• 2009

Counter shaft transmission is a popular automatic transmission power train in construction vehicles such as wheel loader and forklift. The gear train layout of counter shaft transmission is a very basic and important development stage because it affects the most of components design including hydraulic system and shift control algorithm, etc. This paper presents a design methodology for the gear train layout from the analysis of power flow path and clutch hook-up of the existing counter shaft transmission that is adopted in commercialized construction vehicles. Also, independent constraints for the meshed gear ratios are derived in order to realize forward 4-speed and reverse 3-speed gear ratio. The layout design principle proposed here was applied to the new original counter shaft transmission that is underdevelopment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.8
• /
• pp.766-771
• /
• 2005

In this study, PD(partial discharge) signals which occur at stator coil of traction Motor are acquired these data are used for classifying the PD sources. NN(neural network) has recently applied to classify the PD pattern. The PD data are used for the learning process to classify PD sources. The PD data come from normal specimen and defective specimens such as internal void discharges, slot discharges and surface discharges. PD distribution parameters are calculated from a set of the data, which is used to realize diagnostic algorithm. NN which applies distribution parameters is useful to classify the PD patterns of defective sources generating in stator coil of traction motor.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.134.4-134
• /
• 2001

Hydraulically driven manipulators are superior to electrically driven ones in the power density and electrical insulation. But an electro-hydraulic manipulator using hydraulic actuators has many nonlinear elements, and its parameter fluctuations are greater than those of electrically driven manipulator. So it is relatively difficult to realize not only stable contact work but also accurate force control for the autonomous field tasks such as the maintenance task of high voltage active electric line or the automatic excavation task by hydraulic excavator. In this report, we propose robust force control algorithm, which can be applied to the real field task such as the construction field, nuclear plant and so on. Proposed force controller has the same structure as that of disturbance observer for position control. The difference between force and position disturbance ...