• Smart Structures and Systems
• /
• 제14권6호
• /
• pp.1173-1196
• /
• 2014

Real-time dynamic substructuring tests have been conducted on a cable-deck system. The cable is representative of a full scale cable for a cable-stayed bridge and it interacts with a deck, numerically modelled as a single-degree-of-freedom system. The purpose of exciting the inclined cable at the bottom is to identify its nonlinear dynamics and to mark the stability boundary of the semi-trivial solution. The latter physically corresponds to the point at which the cable starts to have an out-of-plane response when both input and previous response were in-plane. The numerical and the physical parts of the system interact through a transfer system, which is an actuator, and the input signal generated by the numerical model is assumed to interact instantaneously with the system. However, only an ideal system manifests a perfect correspondence between the desired signal and the applied signal. In fact, the transfer system introduces into the desired input signal a delay, which considerably affects the feedback force that, in turn, is processed to generate a new input. The effectiveness of the control algorithm is measured by using the synchronization technique, while the online adaptive forward prediction algorithm is used to compensate for the delay error, which is present in the performed tests. The response of the cable interacting with the deck has been experimentally observed, both in the presence of delay and when delay is compensated for, and it has been compared with the analytical model. The effects of the interface delay in real-time dynamic substructuring tests conducted on the cable-deck system are extensively discussed.

• 한국멀티미디어학회논문지
• /
• 제2권3호
• /
• pp.339-346
• /
• 1999

다자간 회의 시스템의 대부분은 RTP(Real Time Protocol)와 RTCP(Real Time Control Protocol)를 이용 하는데,RTCP를 이용한 피드백 정보의 손실률과 전송 시간의 동기화 현상이 다자간 회의 시스템의 확장성에 큰영향을 준다. 이러한 문제를 해결하기 위해서 도입한 무작위 지연 기법은 매우 단순하여 수 많은 참가자들이 동시에 피드백 정보를 전송할 경우 혼잡을 일으키게 되어 확장성이 떨어진다. 본 논문에서는 확장성 증가와 피드백 지연을 줄이기 위해 RTCP에 우선 순위를 부여하여 전송하는 기법올 제안하고 알고리즘을 제시한다. RTCP 헤더 정보를 분석하여 손실률이 높은 수신자에게 우선 순위를 부여한다. 에이전트는 우선 순위에 따라 피드백 메시지를 더 많이 전송함으로써 세션 참가자를 능동적으로 조절함과 동시에 적절한 가용 대역폭을 측정하게 한다. 시뮬레이션으로 평가한 결과 제안된 확장적 우선 순위 기법을 적용할 때 초기 전송 혼잡을 감소시키며 피드백 메시지가 특정 시간에 편중하지 않고 균일하게 분포되었다.

• 한국융합학회논문지
• /
• 제13권4호
• /
• pp.1-6
• /
• 2022

웹 크롤링 데이터를 이용한 실시간 시스템은 원격지의 데이터와 동일한 데이터베이스의 데이터를 사용자에게 제공해야 하며, 이를 위해서 웹 크롤러는 원격지 데이터의 변경 여부를 확인하기 위해 원격 서버에 반복적인 HTTP(HyperText Transfer Protocol) 요청을 수행해야 한다. 이 과정은 크롤링 서버와 원격 서버의 네트워크 부하를 일으키며 과도한 트래픽 발생 등의 문제의 원인이 된다. 이러한 문제점을 해결하기 위해 본 논문에서는 사용자 이벤트를 기반으로 크롤링 서버의 데이터와 다중 원격지 데이터와의 동일성을 유지하는 신뢰성을 확보함과 동시에 네트워크의 과부하를 줄일 수 있는 실시간 웹 크롤링 기법을 제안한다. 제안된 방법은 단위 데이터와 목록 데이터를 요청하는 이벤트를 기반으로 크롤링 프로세스를 수행한다. 실험 결과, 제안된 방법은 기존 웹 크롤러에서의 네크워크 트래픽 과부하를 줄이면서 데이터의 신뢰성을 확보할 수 있음을 확인하였다. 향후에는 이벤트 기반 크롤링과 시간 기반 크롤링에 대한 융합에 대한 연구가 필요하다.

• 한국멀티미디어학회지
• /
• 제1권1호
• /
• pp.19-32
• /
• 1997

There are many kinds of predominant modes to transfer Multimedia information on internet in the world. Various methods are applied to get real time multimedia data as possible as we need. At the moment it is very difficult to use acceptable technologies for performe those methods effectively on the Networks. This paper gives the alternative directions and trends for research and development of multimedia transmission on the internet. ATM is one of the best mode to transfer mass-multimedia data at the high speed on the Broad-Band ISDN until now. And xDSL (xDigital Subscriber Line) is an excellent typical method on the PSTN (Public Switched Telephone Network) using old type telephone line. But they are not yet applied into the phase of practical use together this time. So this paper analyzes what we need and how to develop the multimedia transmission modes which we can send on the internet without a problem or any difficulty for our various multimedia information all the time under low cost and high speed.

• 대한임베디드공학회논문지
• /
• 제9권6호
• /
• pp.335-344
• /
• 2014

As a kind of 2D spatial coordinate transform, image warping is a basic image processing technique utilized in various applications. Though image warping algorithm is composed of relatively simple operations such as memory accesses and computations of weighted average, real-time implementations on embedded vision systems suffer from limited computational power because the simple operations are iterated as many times as the number of pixels. This paper presents a real-time implementation of a look-up table(LUT)-based image warping using an FPGA. In order to ensure sufficient data transfer rate from memories storing mapping LUT and image data, appropriate memory devices are selected by analyzing memory access patterns in an LUT-based image warping using backward mapping. In addition, hardware structure of a parallel and pipelined architecture is proposed for fast computation of bilinear interpolation using fixed-point operations. Accuracy of the implemented hardware is verified using a synthesized test image, and an application to real-time lens distortion correction is exemplified.

• 한국콘텐츠학회논문지
• /
• 제5권1호
• /
• pp.73-79
• /
• 2005

최근 무선 기술의 발전으로 무선랜 분야에서 실시간 서비스의 채용 및 서비스를 위한 기술 채용이 가속화 되고 있다. IEEE 802.11 무선랜 표준은 음성이나 화상과 같은 실시간 트래픽을 제공하기 위하여 PCF 폴링 기법을 정의하고 있다. 폴링 서비스는 무선랜에서 실시간 트래픽을 서비스하기 위한 주요 개념이다. 본 논문에서는 IEEE 802.11 PCF 모드에서 무효 폴 발생시 전송 지연을 줄임으로써 최대 통화 수를 증가시키는 멀티캐스트 폴링기법을 제안한다. 여기서 제안한 기법이 전송지연 및 패킷 폐기율에서 PCF의 성능을 개선시킬 수 있음을 시뮬레이션으로 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.27-30
• /
• 2007

In recent years, scientific community has found renewed interest in hypersonic flight research. These hypersonic vehicles undergo severe aero-thermal environments during their flight regimes. One of the most important topics of research in hypersonic aerodynamics is to find a reasonable way of calculating either the surface temperature or the heat flux to surface when its temperature is held fixed. This requires modeling of physical and chemical processes. Hyperbolic system of equations with stiff relaxation method are being identified in recent literature as a novel method of predicting long time behavior of systems such as gas at high temperatures. In present work, Energy Relaxation Method (ERM) has been considered to simulate the real gas flow over a 2-D cylinder. Present heat flux results over the cylinder compared well with the experiment. Thus, real gas effects in hypersonic flows can be modeled through energy relaxation method.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.182-187
• /
• 2017

Synchronous generators have been significantly applied in large-scale power plants and its monitoring systems are additionally established to sequentially observe states and outputs. We develop a computer based monitoring device for three-phase synchronous power generators in this paper. First, a test-bed of such generator system is created and then a interface board is constructed to transfer electric signals including the output voltage and the current from generators into a computer system via a data acquisition device. Its RMS(root-mean-square) values are continuously shown on a screen of computer systems and its time-histories graphs are additionally illustrated under a graphic user interface(GUI) mode. Lastly, we carry out real-time experiments using the generator system with the monitoring device to demonstrate its reliability and superiority by comparing results of a generic power analyzer which is well-used in measuring various power systems practically.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권1호
• /
• pp.77-92
• /
• 2020

When automatic speech recognition (ASR) is provided as a cloud service, it is easy to collect voice and application domain data from users. Harnessing these data will facilitate the provision of more personalized services. In this paper, we demonstrate our transfer learning-based knowledge service that built with the user-generated data collected through our novel system that deliveries personalized ASR service. First, we discuss the motivation, challenges, and prospects of building up such a knowledge-based service-oriented system. Second, we present a Quadruple Transfer Learning (QTL) method that can learn a classification model from a source domain and transfer it to a target domain. Third, we provide an overview architecture of our novel system that collects voice data from mobile users, labels the data via crowdsourcing, utilises these collected user-generated data to train different machine learning models, and delivers the personalised real-time cloud services. Finally, we use the E-Book data collected from our system to train classification models and apply them in the smart TV domain, and the experimental results show that our QTL method is effective in two classification tasks, which confirms that the knowledge transfer provides a value-added service for the upper-layer mobile applications in different domains.

• 산업경영시스템학회지
• /
• 제38권4호
• /
• pp.159-167
• /
• 2015

We consider a wafer lot transfer/release planning problem from semiconductor wafer fabrication facilities to probing facilities with the objective of minimizing the deviation of workload and total tardiness of customers' orders. Due to the complexity of the considered problem, we propose a two-level hierarchical production planning method for the lot transfer problem between two parallel facilities to obtain an executable production plan and schedule. In the higher level, the solution for the reduced mathematical model with Lagrangian relaxation method can be regarded as a coarse good lot transfer/release plan with daily time bucket, and discrete-event simulation is performed to obtain detailed lot processing schedules at the machines with a priority-rule-based scheduling method and the lot transfer/release plan is evaluated in the lower level. To evaluate the performance of the suggested planning method, we provide computational tests on the problems obtained from a set of real data and additional test scenarios in which the several levels of variations are added in the customers' demands. Results of computational tests showed that the proposed lot transfer/planning architecture generates executable plans within acceptable computational time in the real factories and the total tardiness of orders can be reduced more effectively by using more sophisticated lot transfer methods, such as considering the due date and ready times of lots associated the same order with the mathematical formulation. The proposed method may be implemented for the problem of job assignment in back-end process such as the assignment of chips to be tested from assembly facilities to final test facilities. Also, the proposed method can be improved by considering the sequence dependent setup in the probing facilities.