• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.9
• /
• pp.570-577
• /
• 2014

Range-based real time localization systems require superior localization techniques as well as accurate ranging algorithms for better performance. To evaluate the ranging accuracy between two nodes in practical environments, this paper does not only present a qualitative analysis by computing a distance equation under SDS-TWR measurement model of no symmetry assumption, but also executes a quantitative evaluation by doing experiments after building up a test network employing the developed sensor node. Experimental results show that the ranging accuracy of the proposed implementation of IEEE 802.15.4a software stack is superior with smaller average error rate by 60% to one of the commercial Nanotron's reference development kit.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.3
• /
• pp.332-338
• /
• 2010

In this paper, Zigbee/PLC gateway system is designed for Ubiquitous health care. A protocol conversion algorithm for smooth information exchange between Zigbee and PLC communication has been implemented on the gatway. If a moving object is detected by wireless sensor, the data is transmitted to gateway. Zigbee/PLC gateway analyzes received data and transmits to Power Line Communication for real-time monitoring. Implemented system is can support elder who lives alone activity analysis, crime prevention system, Home network service.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.3
• /
• pp.491-498
• /
• 2014

Recently, cyber terror has been occurred frequently based on advanced persistent threat(APT) and it is very difficult to detect these attacks because of new malwares which cannot be detected by anti-virus softwares. This paper proposes and verifies the algorithms to detect the advanced persistent threat previously through real-time network monitoring and combinatorial analysis of big data log. In the future, APT attacks can be detected more easily by enhancing these algorithms and adapting big data platform.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1434-1441
• /
• 2003

Recent technological advances in utilization and generalization of Internet have overcome some of the limitations of remote robot control range and real-time monitoring system. However, It needs Embedded system with control protocol or hardware which has avility to port the micro realtime operating system in robot control system communicate with remote controlled robot, because those system use the wireless LAM or Bluetooth as a network media. In this paper, we design and implement the wireless MODEM protocol and install it to the server system. Also, we implement a client system could control the remote robot through the server and we assure that this protocol and client/server system ate suitable for small size remote control system based on Internet.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.129-133
• /
• 2006

In China, the traditional method of artificial and periodical cruise is still adopted for the AtoN management, which has brought many disadvantages to the work of the AtoN management, such as non real-time, fallibility, and low efficiency However, with the rapid development of AIS technique, now AIS equipments have been widely installed on ships, and on the other hand China Maritime Safety Administration (abr. China MSA) is carrying out the scheme of AIS base station network in china, based on which the digital AtoN will develop in the future. According to what have been analyzed above, this paper puts forward a design of AtoN wireless surveillance system based on AIS. The system consists of AIS on AtoN, AIS base station and AtoN management center. It can provide such functions as the information gathering, managing of AtoN and the service of navigation assistance. This paper gives the whole design including the work theory, the hardware structure and the software scheme of the system, and finally gives the simulation software of the AtoN management center. The AtoN wireless surveillance system brought forward by this paper will be more efficient with less repair cost and less work of the supervisors. It will bring revolutionary progress in the navigation aids system in China.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.55-56
• /
• 2018

In order to construct an efficient monitoring system for major port cities in Korea, the first step to build and manage related laws and institutional infrastructure with strengthen the cooperation of the relevant agencies, regional port authorities, and port corporations. Second, for the management of air pollutants emitted by ports, a management system should be established through systematic inventory source inventory and real-time monitoring system. Third, active countermeasures should be established to reduce the emission of air pollutants by sources such as ships, harbor equipment, and trucks. This will improve the air quality of major port cities and move them to clean port cities.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.7
• /
• pp.1788-1796
• /
• 1997

In this paper, we propose a new connection admission control(CAC) algorithm for traffic control in ATM network in which traffic estimation is performed based on user-specified parameters at every moment of connection request or connection release by recursive formula which makes real-time calculation possible. And traffic estimation using cell flow measurement is carried out when the number of connectioned calls does not change during a measurement reflection period. Performance analysis of the proposed method is carried out using several aspects for homogeneous and heterogeneous bursty traffic. The results showed that the proposed CAC method revealed better performance, than conventional CAC method for burst model in both utilization and QoS point of view.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1454-1470
• /
• 2014

This paper propose a new power conditioner topology with intelligent power management controller that integrates multiple renewable energy sources such as solar energy, wind energy and fuel cell energy with battery backup to make best use of their operating characteristics and obtain better reliability than that could be obtained by single renewable energy based power supply. The proposed embedded controller is programmed for maintaining a constant voltage at PCC, maximum power point tracking for solar PV panel and WTG and power flow control by regulating the reference currents of the controller on instantaneous basis based on the power delivered by the sources and load demand. Instantaneous variation in reference currents of the controller enhances the controller response as it accommodates the effect of continuously varying solar insolation and wind speed in the power management. The power conditioner uses a battery bank with embedded controller based online SOC estimation and battery charging system to suitably sink or source the input power based on the load demand. The simulation results of the proposed power management system for a standalone solar/WTG/fuel cell fed hybrid power supply with real time solar radiation and wind velocity data collected from solar centre, KEC for a sporadically varying load demand is presented in this paper and the results are encouraging in reliability and stability perspective.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.105-110
• /
• 2009

Distributed Generation (DG) is predicted to play a important role in electric power system in the near future. insertion of DG system into existing distribution network has great impact on real-time system operation and planning. It is widely accepted that micro turbine generation (MTG) systems are currently attracting lot of attention to meet customers need in the distributed power generation market In order to investigate the performance of MT generation systems, their efficient modeling is required. This paper presents the modeling and simulation of a MT generation system suitable for grid-connected operation. The system comprises of a permanent magnet synchronous generator driven by a MT. A brief description of the overall system is given, and mathematical models for the MT and permanent magnet synchronous generator are presented. Also, the use of Power electronics in conditioning the power output of the generating system is demonstrated. Simulation studies with MATLAB/Simulink have been carried out in grid-connected operation mode of a DG system. The control strategies for grid connected operation mode of DG system is also presented.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.210-216
• /
• 2009

Distributed Generation (DG) is predicted to play a important role in electric power system in the near future. insertion of DG system into existing distribution network has great impact on real-time system operation and planning. It is widely accepted that micro turbine generation (MTG) systems are currently attracting lot of attention to meet customers need in the distributed power generation market. In order to investigate the performance of MT generation systems, their efficient modeling is required. This paper presents the modeling and simulation of a MT generation system suitable for stand-alone operation. The system comprises of a permanent magnet synchronous generator driven by a MT. A brief description of the overall system is given, and mathematical models for the MT and permanent magnet synchronous generator are presented. Also, the use of power electronics in conditioning the power output of the generating system is demonstrated. Simulation studies with MATLAB/Simulink have been carried out in stand-alone operation mode of a DG system.