• Journal of Korea Multimedia Society
• /
• v.22 no.12
• /
• pp.1438-1446
• /
• 2019

Recently, the number of mobile users as well as high-speed Internet user has been increasing rapidly. Moreover, traffic is growing fast as services that provide real-time content such as Youtube and Netflix become popular. The problem of traffic control in real-time content services is important because many people use cell phones to receive real-time content. In this regard, the field of CCN is currently being studied. We studied the mobility of nodes among CCN research fields. Node mobility can be divided into three categories : consumer mobility, intermediate node, and provide mobility. In this paper, we propose Mobility Node Support(MD-INS) to support the intermediate-node mobility in CCN real-time services. Experimental results show that the proposed scheme shows better performance than CCN in terms of service disconnection time and packet loss.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.777-779
• /
• 2003

This paper describes the real-time data linkage of the field control system for distributed control in nuclear power plant environment. The most important keys of digital control system in nuclear power plant are the reliability and stability of system, and real-time control ability. This Paper brought up the hardware construction using a new method about the design of each station located upon control transmission network to improve real-time ability of field control system, and measured the station binding time between devices connected to field control module. And it was confirmed performance improvement of overall system for real-time data linkage between control devices.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.11
• /
• pp.1637-1645
• /
• 2004

In remote control of telerobotics equipment, the real-time visual feedback is necessary in order to facilitate real-time control. Because of the network congestion and the associated delays, the real-time image feedback is generally difficult in the public networks like internet. If the remote user is not able to receive the image feedback within a certain time, the work performance may tend to decrease, and it makes difficulties to control of the telerobotics equipment. In this paper, we propose an improved visual feedback scheme over the internet for telerobotics system. The size of a remote site image and its quality are adjusted for efficient transmission. The constructed system has a better real-time update characteristics, and shows a potential for the real-time visual control of the telerobotics system.

• ETRI Journal
• /
• v.21 no.4
• /
• pp.52-64
• /
• 1999

QoS monitoring is a kind of real-time systems which allows each level of the system to track the ongoing QoS levels achieved by the lower network layers. For these systems, real-time communications between corresponding transport protocol objects is essential for their correct behavior. When two or more entities are employed to perform a certain task as in the case of communication protocols, the capability to do so is called interoperability and considered as the essential aspect of correctness of communication systems. This paper describes a formal approach on modeling and interoperability test case generation of a real-time QoS monitoring protocol. For this, we specify the behavior of flow monitoring of transport layer QoS protocol, i.e., METS protocol, which is proposed to address QoS from an end-to-end's point of view, based on QoS architecture model which includes ATM net work in lower layers. We use a real-time Input/Output finite State Machine to model the behavior of real-time flow monitoring over time. From the modeled real-time I/OFSM, we generate interoperability test cases to check the correctness of METS protocol's flow monitoring behaviors for two end systems. A new approach to efficient interoperability testing is described and the method of interoperability test cases generation is shown with the example of METS protocol's flow monitoring. The current TTCN is not appropriate for testing real-time and multimedia systems. Because test events in TTCN are for message-based system and not for stream-based systems, the real-time in TTCN can only be approximated. This paper also proposes the notation of real-time Abstract Test Suite by means of real-time extension of TTCN. This approach gives the advantages that only a few syntactical changes are necessary, and TTCN and real-time TTCN are compatible. This formal approach on interoperability testing can be applied to the real-time protocols related to IMT-2000, B-ISDN and real-time systems.

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.109-112
• /
• 2020

Many devices are connected on the internet to give functionalities for interconnected services. In 2020', The number of devices connected to the internet will be reached 5.8 billion. Moreover, many connected service provider such as Google and Amazon, suggests edge computing and mesh networks to cope with this situation which the many devices completely connected on their networks. This paper introduces the current state of the introduction of the wireless mesh network and edge cloud in order to efficiently manage a large number of nodes in the exploding Internet of Things (IoT) network and introduces the existing Network Time Protocol (NTP). On the basis of this, we propose a relatively accurate time synchronization method, especially in heterogeneous mesh networks. Using this NTP, multiple time coordinators can be placed in a mesh network to find the delay error using the average delay time and the delay time of the time coordinator. Therefore, accurate time can be synchronized when implementing IoT, remote metering, and real-time media streaming using IoT mesh network.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.76-91
• /
• 1996

In this paper, we proposed the new medium access control protocol for the virtual token bus netowrk. The network is applied to inter-processor communication network of large capacity digital switching system and digital mobile system with distributed control architecture. in the virtual token bus netowrk, the existing medium access control protocols hav ea switchove rtime overhead when traffic load is light or asymmetric according ot arbitration address of node that has message to send. The proposed protocol optimized average message delay using cyclic bus access chain to exclude switchover time of node that do not have message to send. Therefore it enhanced bus tuilization and average message delay that degrades the performance of real time communication netowrks. It showed that the proposed protocol is more enhacned than virtual token medium access control protocol and virtual token medium access control protocol iwth reservation through performance analysis.

• Journal of Communications and Networks
• /
• v.8 no.4
• /
• pp.432-441
• /
• 2006

As the community antenna television (CATV) networks becomes ubiquitous, instead of constructing an entirely new broadband network infrastructure, it has emerged as one of the rapid and economic technologies to interconnecting heterogeneous network to provide broadband access to subscribers. How to support ubiquitous real-time multimedia applications, especially in a heavy traffic environment, becomes a critical issue in modern CATV networks. In this paper, we propose a time guaranteed and efficient upstream minislots allocation algorithm for supporting quality-of-service (QoS) traffic over data over cable service interface specification (DOCSIS) CATV networks to fulfill the needs of realtime interactive services, such as video telephony, video on demand (VOD), distance learning, and so on. The proposed adaptive fast expansion algorithm and the loading statistics with dynamic swapping algorithm have been shown to perform better than that of the multimedia cable network system (MCNS) DOCSIS.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.1013-1016
• /
• 1999

In this paper, a real-time communication method using a PICNET-NP(Plant Instrumentation and Control Network for Nuclear Power plant) is proposed with an analysis of the control network requirements of DCS (Distributed Control System) in nuclear power plants. The method satisfies deadline in case of worst data traffics by considering aperiodic and periodic real-time data and others. In addition, the method was used to analyze the data characteristics of the DCS in existing nuclear power plant. The result shows that use of this method meets the response time requirement(100ms)

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.1
• /
• pp.135-158
• /
• 2018

High-Speed vehicles can be considered as multiple mobile nodes that move together in a large-scale mobile network. High-speed makes the time allowed for a mobile node to complete a handover procedure shorter and more frequently. Hence, several protocols are used to manage the mobility of mobile nodes such as Network Mobility (NEMO). However, there are still some problems such as high handover latency and packet loss. So efficient handover management is needed to meet Quality of Service (QoS) requirements for real-time applications. This paper utilizes the cross-layer seamless handover technique for network mobility presented in cellular networks. It extends this technique to propose QoS-aware NEMO protocol which considers QoS requirements for real-time applications. A novel analytical framework is developed to compare the performance of the proposed protocol with basic NEMO using cost functions for realistic city mobility model. The numerical results show that QoS-aware NEMO protocol improves the performance in terms of handover latency, packet delivery cost, location update cost, and total cost.

• Journal of Korea Game Society
• /
• v.18 no.5
• /
• pp.15-22
• /
• 2018

Currently, there are many augmented reality content, but little has been commercialized that two or more terminals communicate in real time and use at the same time. In this paper, we are going to study the possibility of network augmented reality contents using Bluetooth communication. Through this research, network augmented reality development and contents will be expanded further.