• 한국지능시스템학회논문지
• /
• 제10권5호
• /
• pp.423-431
• /
• 2000

In this paper, the effect of computing time-delay in the real-time digital fuzzy control systems is investigated and the design methodology of a real-time digital fuzzy controller(DFC) to overcome the problems caused by it is presented. We propose the fuzzy feedback controller whose output is delayed with unit sampling period. The analysis and the design problem considering computing time-delay is very easy because the proposed controller is syncronized with the sampling time. The stabilization problem of the digital fuzzy control system is solved by the linear matrix inequality(LMI) theory. Convex optimization techniques are utilized to find the stable feedback gains and a common positive definite matrix P for the designed fuzzy control system Furthermore, we develop a real-time fuzzy control system for backing up a computer-simulated truck-trailer with the consideration of the computing time-delay. By using the proposed method, we design a DFC which guarantees the stability of the real time digital fuzzy control system in the presence of computing time-delay.

• 한국멀티미디어학회논문지
• /
• 제25권2호
• /
• pp.325-334
• /
• 2022

Digital twin has the advantages of quality improvement and cost reduction, so it is widely applied to various industries. In this paper, a method to implement the major technologies of digital twin easily and quickly is presented. These include data management and relay servers, real-time monitoring applications including remote control interfaces, and direct connection protocols for video streaming. In addition, an algorithm for controlling a two-wheeled vehicle with a 2D interface is also proposed. The implemented system performs near real-time synchronization between the real environment and the virtual space. The delay time that occurs in remote control of the vehicle in the real environment was compared with the results of applying the proposed delay time reduction method. In addition, in the case of 2D interface-based control, an algorithm that can guarantee the user experience was implemented and applied to the actual environment and verified through experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.744-747
• /
• 1997

High performance digital computer technology enables the digital computer-based controllers to replace traditional analog controllers used for factory automations. This replacement, however, brings up the side effects caused by discrete quantization and non-real-time execution of control softwares. This paper describes the structure of real-time simulator and controller that can be used for design and verification of real-time digital controllers. The virtual machine concept adopted by real-time simulator make the proposed simulator be independent from the specific hardware platforms. The proposed system can also be used in the loosely coupled distributed environments connected through local area network using real-time message passing algorithm and virtual data table based on the shared memory mechanism.

• 제어로봇시스템학회논문지
• /
• 제5권1호
• /
• pp.115-121
• /
• 1999

Advanced digital computer technology enables the computer-based controllers to replace the traditional analog controllers used in factory automations. This replacement, however, brings up the side effects caused by the quantization error and non-real-time execution of control software. This paper describes the structure of real-time simulator and controller that can be used for design and verification of real-time digital controllers. The virtual machine concept adopted by the proposed real-time simulator makes the proposed simulator be independent from the specific hardware platforms. The proposed system can also be used in the loosely coupled distributed environments connected through local area network using real-time message passing algorithm and virtual data table based on the shared memory mechanism.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.741-746
• /
• 2004

We propose a new technique to the design and real-time implementation of an adaptive controller for robotic manipulator based on digital signal processors in this paper. The Texas Instruments DSPs(TMS320C80) chips are used in implementing real-time adaptive control algorithms to provide enhanced motion control performance for dual-arm robotic manipulators. In the proposed scheme, adaptation laws are derived from model reference adaptive control principle based on the improved direct Lyapunov method. The proposed adaptive controller consists of an adaptive feed-forward and feedback controller and time-varying auxiliary controller elements. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the proposed adaptive controller is illustrated by simulation and experimental results for a dual arm robot consisting of two 4-d.o.f. robots at the joint space and cartesian space.

• 제어로봇시스템학회논문지
• /
• 제5권7호
• /
• pp.868-875
• /
• 1999

In this paper, digital motor control center using protection relay is developed in order to protect power systems by means of timely fault detection and diagnosis during operation for induction motor which have various load environments and capacities in power systems. Digital motor control center is employed by power supervisory control systems without separate remote terminal unit and transducers adding communicational ability. Also we develope a maximum demand controller to control the load effectively at peak status and a power factor controller to minimize real power losses and improve the power factor. Therefore, when using the developed controller, real time computation is possible by loading DSP in hardware and applying real-time kernel which can convert each algorithm to task module.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1171-1181
• /
• 2019

Modular Multilevel Converter (MMC)-based HVDC power transmission using a real-time simulator is one of the key technologies in power electronics research. This paper introduces the design methodology of a physical MMC-HVDC control system based on a Field-Programmable Gate Array (FPGA), which has the advantage of high-speed parallel operation, and validates the accuracy of MMC-HVDC control when operated with a Real-Time Digital Simulator (RTDS). Finally, this paper compares and analyzes the characteristics of capacitor voltage balancing methods such as Nearest Level Control (NLC), NLC with a reduced switching frequency, and tolerance band modulation implemented on physical control system.

• 한국멀티미디어학회논문지
• /
• 제24권12호
• /
• pp.1682-1692
• /
• 2021

Digital Twin, one of the core technologies of the Fourth Industrial Revolution, is attracting attention as a very suitable technology for disaster monitoring such as fires and earthquakes. In this paper, we implement a system equipped with UWB RTLS(Ultra-Wideband Real Time Location System), real-time remote control, and video streaming, which are element technologies for disaster monitoring digital twin. Since the proposed system structure is based on a cloud server, the actual location of the UWB indoor positioning-based client is transmitted to the user device in real time and stored on the cloud server for statistical and data analysis. In addition, we demonstrate through experiments that outliers occurs when the value of RSSI(Received Signal Strength Indicator) decreases due to communication collisions between UWB Tags, and propose an RSSI outlier correction algorithm to solve this problem.

• 제어로봇시스템학회논문지
• /
• 제4권4호
• /
• pp.517-524
• /
• 1998

This paper discusses the development of a reactive power controller using digital signal processing. Digital Signal Processing is the technique of using digital devices to Process continuous signals or data, often in real-time. And DSP algorithms are associated with a discrete time interval between input samples. When one designs a digital filter, one can use a Laplace transform to determine the continuous time frequency response. The corresponding discrete time transform is called Z transform and depends upon discrete samples of the input spaced equally in time. The objectives of this paper are to minimize real power losses and improve the power factor of a given system. Also, the implementation of a direct-form non recursive filter on the TMS320C31 has been described. The application of this microprocessor-based controller using DSP on test system reveals its numerous advantages. Performance and features of the controller for the reactive power control are analyzed.

• Journal of Power Electronics
• /
• 제11권2호
• /
• pp.113-119
• /
• 2011

This paper presents a DSP based direct digital control design and implementation for a high power boost converter. A single loop and dual loop voltage control are digitally implemented and compared. The real time workshop (RTW) is used for automatic real-time code generation. Experimental results of a 20 kW boost converter based on the TMS320F2808 DSP during reference voltage changes, input voltage changes, and load disturbances are presented. The results show that the dual loop control achieves better steady state and transient performance than the single loop control. In addition, the experimental results validate the effectiveness of using the RTW for automatic code generation to speed up the system implementation.