• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권8호
• /
• pp.371-377
• /
• 2005

This paper Presents the Potential gradient characteristics of structure grounding electrode when a test current flows through grounding electrode. In order to analyze the potential gradient of ground surface on structure grounding electrode, the reduced scale model has been used. The potential gradient has been measured and analyzed for types of structure using the hemispherical grounding simulation system in real time. The structures were designed through reducing real buildings and fabricated with four types on a scale of one-one hundred sixty. The supporter was made to put up with weight of structure and could move into vertical, horizontal, rotary direction. When a test current flowed through structure grounding electrodes, ground potential rise was the lowest value at electric cage type(type B). According to resistivity and absorption percentage In concrete attached to structure, the potential distribution of ground surface appeared differently.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.655-660
• /
• 2007

This paper presents real-time hybrid test method of large-scale MR damper applied to a building structure under seismic excitation. The real-time hybrid test using an actuator for the control performance evaluation of a MR damper controlling the response of earthquake-excited building structure is experimentally implemented. In the test, the building structure is used as a numerical part, on which a large-scale MR damper adopted as an experimental part was installed to reduce its response. At first, the force that is acting between a MR damper and building structure is measured from the load cell attached on the actuator system and is fed-back to the computer to control the motion of the actuator. Then, the actuator is so driven that the error between the interface displacement computed from the numerical building structure with the excitations of earthquake and the fed-back interface force and that measured from the actuator. The control efficiency of the MR damper used in this paper is experimentally confirmed by implementing this process of experiment on real-time.

• 한국소음진동공학회논문집
• /
• 제18권1호
• /
• pp.131-138
• /
• 2008

This paper presents real-time hybrid test method of large-scale MR damper applied to a building structure under seismic excitation. The real-time hybrid test using an actuator for the control performance evaluation of a MR damper controlling the response of earthquake-excited building structure is experimentally implemented. In the test, the building structure is used as a numerical part, on which a large-scale MR damper adopted as an experimental part was installed to reduce its response. At first, the force that is acting between a MR damper and building structure is measured from the load cell attached on the actuator system and is fed-back to the computer to control the motion of the actuator. Then, the actuator is so driven that the error between the interface displacement computed from the numerical building structure with the excitations of earthquake and the fed-back interface force and that measured from the actuator. The control efficiency of the MR damper used in this paper is experimentally confirmed by implementing this process of experiment on real-time.

• 대한교통학회지
• /
• 제19권6호
• /
• pp.131-142
• /
• 2001

Previous OD matrix estimation methods from link traffic counts have focused on the formulation of mathematical model and its solution algorithm. Thereby those methods have assumed that true or real OD is similar to the target OD and paid little attention to the properties of the change of OD structure. Although it is general situation that each OD pair increases or decreases due to significant land use and to large time variation between target OD with real OD, those methods have set unrealistic assumptions that target OD increases or decreases uniformly and that the OD structure does not change. Therefore those methods have showed poor performance of OD estimation in general situation. To cope with the problem. this paper suggests a new concept of OD matrix structure and shows the shortcomings of previous method′s dependancy on target OD matrix. We divide "OD trips" into "OD scale" and "OD structure". Where OD scale is a quantitative magnitude of OD trips and "OD structure" is ordinal OD scale. This paper use the same solution algorithm developed by Baek et al. (2000) for analysing the OD structure. Results of numerical examples show that the performance of the method is better than that of previous methods, while the previous methods have better performance in estimation only when OD trips increase or decrease. In addition to, if OD structure does not change, the results show that the error of estimation is low relatively regardless of the large difference of trips between target OD and real OD. This paper also shows that the model performance on OD structure and on OD trips is low as the number of origins that OD structure is changed increase. From the results we suggest that the change of OD structure can be more important information than the difference between target OD and real OD in OD estimation steps.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권6호
• /
• pp.781-788
• /
• 1999

In this paper, an expert system is proposed, which can be effectively applied to the large-scale systems with the diversity time constraints, the objectives and the unfixed system structure. The inference scheme of the expert system have the integrated structure composed of the intuitive inference module and logical inference module in order to support effectively the operating constraints of system. The intuitive inference module is designed using the pattern matching or pattern recognition method in order to search a same or similar pattern under the fixed system structure. On the other hand, the logical inference module is designed as the structure with the multiple inference mode based on the heuristic search method in order to determine the optimal or near optimal control strategies satisfing the time constraints for system events under the unfixed system structure, and in order to use as knowledge generator. Here, inference mode consists of the best-first, the local-minimum tree, the breadth-iterative, the limited search width/time method. Finally, the application results for large-scale distribution SCADA system proves that the inference scheme of the expert system is very effective for the large-scale system. The expert system is implemented in C language for the dynamic mamory allocation method, database interface, compatability.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.407-412
• /
• 1987

A large scale programmable controller is developed which adopts a multiprocessor structure. The developed programmable controller consists of the programmer, the system controller, and the input-output unit. The structure and characteristics of the system controller will be described. The PC has a special hardware scheme to solve the Boolean logic instructions of the sequence control programs. The multiprocessor structure and the special hardware enables, the real time operation and the high speed scanning which is prerequisite to the large scale, programmable controller even for many I/O points.

• Smart Structures and Systems
• /
• 제4권5호
• /
• pp.667-684
• /
• 2008

Numerous devices exist for reducing or eliminating seismic damage to structures. These include passive dampers, semi-active dampers, and active control devices. The performance of structural systems with these devices has often been evaluated using numerical simulations. Experiments on structural systems with these devices, particularly at large-scale, are lacking. This paper describes a real-time hybrid testing facility that has been developed at the Lehigh University NEES Equipment Site. The facility enables real-time large-scale experiments to be performed on structural systems with rate-dependent devices, thereby permitting a more complete evaluation of the seismic performance of the devices and their effectiveness in seismic hazard reduction. The hardware and integrated control architecture for hybrid testing developed at the facility are presented. An application involving the use of passive elastomeric dampers in a three story moment resisting frame subjected to earthquake ground motions is presented. The experiment focused on a test structure consisting of the damper and diagonal bracing, which was coupled to a nonlinear analytical model of the remaining part of the structure (i.e., the moment resisting frame). A tracking indictor is used to track the actuator ability to achieve the command displacement during a test, enabling the quality of the test results to be assessed. An extension of the testbed to the real-time hybrid testing of smart structures with semi-active dampers is described.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권1호
• /
• pp.59-66
• /
• 2021

세계적으로 자연재해의 빈도와 규모가 증가하고 있으며, 이러한 자연재해는 토목구조물에 다양한 손상을 유발할 수 있다. 이 중 가장 심각한 손상을 유발할 수 있는 자연 재해 중 하나가 지진이다. 따라서 지진에 대하여 구조물의 안전성을 확보하기 위해 다양한 연구들이 진행되고있다. 지진시 토목구조물의 안전성이나 메커니즘에 대한 연구는 대부분 축소모형실험을 바탕으로 진행되고 있으며, 이는 토목구조물의 규모를 고려하였을 때 실구조물실험이 불가능하기 때문이다. 이러한 축소모형연구에서는 Iai가 제안한 상사법칙이 주로 인용되고 있으나, Iai가 제안한 상사법칙을 적용할 경우 축소모델 제작에 필요한 구조부재의 선정에 많은 어려움이 따르게 된다. 이는 Iai가 제안한 상사비를 적용할 경우 구조물의 재료특성인 탄성계수에 상사비를 적용하여야 하기 때문이다. 따라서 이논문에서는 실제구조물과 동일한 재료특성을 갖는 축소모형에 적용되는 상사비를 Iai의 상사법칙에 근거하여 적용하고, 유한요소해석을 통하여 축소모형과 실구조의 동특성을 비교·분석하였다. 이 논문에서 적용한 상사법칙에 근거한 축소모형실험을 통해 산정된 구조물의 특성이 실구조물의 특성을 더욱 정확히 반영할 수 있을 것으로 판단된다.

• 한국지진공학회논문집
• /
• 제10권6호
• /
• pp.103-114
• /
• 2006

강제 진동 실험은 구조물의 수학적 모델과 실제 모델의 상관관계를 입증하여 구조물의 성능을 정확히 평가하기 위해 중요하기 때문에, 동적 및 정적 가진 실험을 통해 구조물의 내진성능을 평가하는 다양한 기법이 사용되고 있다. 본 논문에서는 복합 질량형 감쇠기(Hybrid Mass Damper, HMD)를 이용하여 지진하중을 모사하는 실물크기 철골조 구조물의 강제진동실험이 수행되었다. ANSYS를 사용하여 구조물의 유한요소 해석모델을 구축하였고, 강제진동 실험을 통해 얻은 계측데이터를 사용하여 이 해석모델을 갱신하였다. 의사 지진 가진 실험은 HMD에 의해 유도된 층응답이 실험을 통해 갱신된 유한요소모델을 사용한 수치해석 응답과 일치함을 보여준다.

• 한국항해항만학회지
• /
• 제37권5호
• /
• pp.527-533
• /
• 2013

본 논문은 구조물의 동적특성인 모드형상과 고유진동수를 이용한 손상탐지와 유효 물성치 추정을 통하여 콘크리트 축소모형과 실제 콘크리트 부유식 구조물 함체의 건전성을 평가하였다. 손상탐지의 경우 콘크리트 축소모형에 대한 동적실험을 수행하여 모드형상을 추출한 후 손상탐지기법에 적용하여 실용성을 증명하였다. 또한 실제 콘크리트 부유식 구조물 함체의 모드형상 및 고유진동수를 실험을 통하여 구한 후 구조계추정기법을 이용하여 콘크리트의 유효 물성치를 추정하였다. 손상탐지기법을 이용하여 축소모형의 손상부재를 정확히 찾아내었으며, 구조계추정기법을 이용하여 실제 콘크리트 부유식 함체의 현재 유효 물성치를 추정하였다.