• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.204-205
• /
• 2005

The following instructions give you basic guidelines for preparing camera-ready papers for the proceeding of the KOSME. We recommend you to use the HWP word processor.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.477-482
• /
• 2016

This study investigates the expressions characteristics of compression strength depending on the condition of fresh concrete and cured concrete by producing Non-cement mortar and concrete only with solidified sludge in the dehydrated cake form, recycled concrete and premixed materials(BS, FA) in order to actively use remicon recycling water as resources, rather than as construction waste material. After treating wastewater of pH 12.5 or more with alkali activator and after promoting BS hydration reaction, the amount of BS inflow was found to be increased and compression strength was increased accordingly: these results coincide with the analysis results of TG-DTA and SEM.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.105-112
• /
• 2005

Stabilizing and rousing sludge water generated from washing truck mixer and batcher plant can resolve inconsistency in quality and improve strength, therefore it is essential to review how to utilize it. This research conducted experiments and studied on solids of sludge water to find out the types of stabilizing agents available in conditions of producing ready mixed concretes in Korea. The result showed that oxy carboxylic acid retarder dedicated for stabilizing sludge water was most effective in decreasing solid. However, the setting time of cement paste was retarded due to surplus reactants, but it did not impede application of ready mixed concretes. When we left the sludge water mixed with stabilizing agent, it has been noted that initial retard effect recovered to the level using just service water in 7${\~}$8 days and that it is effective to use stabilized sludge water in 2${\~}$3 days. On the other hand, saccharic type super retarding agent was also outstanding in applicability by showing similar effect. The sludge water stabilizing agents currently marketed depend on imports, therefore it is necessary to locally manufacture usable stabilizing agents and to review its usability with multi-dimensional view.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.1215-1227
• /
• 2021

Surface reflectance, as a product of the absolute atmospheric correction process of low-orbit satellite imagery, is the basic data required for accurate vegetation analysis. The Commission on Earth Observation Satellite (CEOS) has conducted research and guidance to produce analysis-ready data (ARD) on surface reflectance products for immediate use by users. However, this trend is still in the early stages of research dealing with ARD for high-resolution multispectral images such as KOMPSAT-3A and CAS-500, as it targets medium- to low-resolution satellite images. This study first summarizes the types of distribution of ARD data according to existing cases. The link between Open Data Cube (ODC), the cloud-based satellite image application platforms, and ARD data was also explained. As a result, we present practical ARD deployment steps for high-resolution satellite images and several types of application models in the conceptual level for high-resolution satellite images deployed in ODC and cloud environments. In addition, data pricing policies, accuracy quality issue, platform applicability, cloud environment issues, and international cooperation regarding the proposed implementation and application model were discussed. International organizations related to Earth observation satellites, such as Group on Earth Observations (GEO) and Committee on Earth Observation Satellites (CEOS), are continuing to develop system technologies and standards for the spread of ARD and ODC, and these achievements are expanding to the private sector. Therefore, a satellite-holder country looking for worldwide markets for satellite images must develop a strategy to respond to this international trend.

• Journal of the Korean Society for Library and Information Science
• /
• v.7
• /
• pp.197-223
• /
• 1980

This paper consists of two parts: the first part discusses general problems of microforms as transmission and storage media of research information, especially in view of user's reactions to this unconventional media. Many articles and surveys from major American library journals and other professional publications have been mentioned and reviewed to find out the common issues which could be relevent to Korean case. The latter part is the analysis of the two sets of surveys. One was done from 5 research libraries in Seoul and the other, from 150 researchers who were the users of the libraries. The major findings are: The research libraries in Korea are in the infant stage of building their microform research collection. They are doing their special effort to level up the weaknesss of the collection. Presently, general level of usage is very low, although the users showed a positive attitude toward this unaccustomed media. They are well convinced with necessity of use of microforms in their research and they have correct ideas about some of the problems they are going to face along with the eventual heavier use of the materials. They are psychologically ready to accept them and to make a good use out of them if some of the external conditions for proper use of the material would be guaranteed.

• Journal of the East Asian Society of Dietary Life
• /
• v.26 no.5
• /
• pp.466-472
• /
• 2016

The objectives of the study were to analyze the various nutrient contents of ready-to-use-supplemental-food (RUSF) developed with Eastern African ethnic plants and compare them with commercially available supplemental food (CASF) for infants. RUSF was made with three African plants, including Ficus sur, Amaranthus caudatus, and Prosopis juliflorafa and locally available food ingredients in DR Congo and Ethiopia and was cooked at $180^{\circ}C$ for 20 min in a conventional oven. Macronutrients were analyzed by the AOAC method. Contents of 17 amino acids were analysed with amino acid analyzer, and vitamin $B_1%$ niacin, vitamin $B_6$, and vitamin C were analyzed with HPLC. Isomers of vitamin E were analyzed by GC-FID. The price of RUSF was 0.133 USD per 100g. Contents of macronutrients were not significantly different between developed RUSF and CASF. Results of amino acid analysis showed that most amino acid contents were similar or higher in RUSF compared with CASF. However, glutamic acid and lysine contents were less in RUSF than in CASF. Vitamin E and vitamin $B_1$ contents were more than five times higher in RUSF (22.40, 6.26 mg/100 g, respectively) than in CASF (4.00, 0.80 mg/100 g, respectively). Niacin was about three times higher while vitamin $B_6$ was almost 20 times higher in RUSF than in CASF. However, ascorbic acid was significantly lower in RUSF (3.43 mg/100 g) than in CASF (42.08 mg/100 g). Our study found that the developed localized RUSF showed higher nutrient contents in most micronutrients analyzed except for ascorbic acid. Out of 17 amino acids, glutamic acid and lysine contents in RUSF were less than in CASF. Therefore, further study is needed in order to improve these nutrients contents.

• The Journal of Korea Robotics Society
• /
• v.14 no.2
• /
• pp.114-121
• /
• 2019

This paper presents a new benchmark system for visual odometry (VO) and monocular depth estimation (MDE). As deep learning has become a key technology in computer vision, many researchers are trying to apply deep learning to VO and MDE. Just a couple of years ago, they were independently studied in a supervised way, but now they are coupled and trained together in an unsupervised way. However, before designing fancy models and losses, we have to customize datasets to use them for training and testing. After training, the model has to be compared with the existing models, which is also a huge burden. The benchmark provides input dataset ready-to-use for VO and MDE research in 'tfrecords' format and output dataset that includes model checkpoints and inference results of the existing models. It also provides various tools for data formatting, training, and evaluation. In the experiments, the exsiting models were evaluated to verify their performances presented in the corresponding papers and we found that the evaluation result is inferior to the presented performances.

• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.33-35
• /
• 2017

We have been working on data processing and calibration of AKARI/IRC images from pointed observations. As of September 2014, a data package for each pointing only contains raw data and quick-look data, so that users have to process them using the toolkit by themselves. We plan to change this situation and to provide science-ready data sets, which are easy-to-use for non-AKARI experts. For Phase 1&2, we have updated dark and flat calibrations, and also the toolkit itself to produce images more reliable and easier to use. A new data package includes fully calibrated images with WCS information. We released it for about 4000 pointings at the end of March 2015.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.19-20
• /
• 2013

Consider about aggregate's price, coarse aggregates from 13 to 25mm were widely used in ready mixed concrete company. But if only use 13 to 25mm aggregates in the concrete, gap grading problem would be occurred. When recycled aggregates from 13 to 25mm was used, continuous grading would increase the durability and strength for the concrete, meanwhile the construction waste materials would also be reused. In this paper, 5-13mm recycled aggregates was utilized, to analyse the fundamental properties for concrete, strength has been tested to evaluate the quality and reusing effect of the recycled materials.

• Proceedings of the KIEE Conference
• /
• 1985.07a
• /
• pp.257-261
• /
• 1985

This paper deals with the personal computer based design for the sequential machines. Most part of sequential machine design have been implemented by using general purpose microprocessors in order to obtain the specific unctions required for their system. But, they have some difficulties in design stages. Knowledge of systems design method and high technology are basically applied to all the design stages.. Therefore ready made microcomputer system for personal use, personal computer, can be transformed to sequential machines by using the corresponding softwares and built-in personal computer input/output ports. Following the state transition diagram or table, we can obtain the ROM type of sequential machines directly and need not to design input/output interface except actuators and samplers because of capability of personal computer. Our main purpose of this design method are quick, flexible, reliable, modifiable circuit design of the sequential machines. In this paper, we use APPLE-II plus personal computer as target machine.