• 한국연소학회:학술대회논문집
• /
• 2013.06a
• /
• pp.25-28
• /
• 2013

This study presents both experimental and numerical investigation of ignition characteristics of n-heptane and n-butanol mixture. The $O_2$ concentration was fixed to 9-10% to make high exhaust gas recirculation(EGR) rate condition. Experiments were performed using a rapid compression machine. In addition, a numerical study of the ignition delay time was performed using CHEMKIN codes to validate experimental results and predict chemical species after combustion process. The results showed that the ignition delay time increased with increasing n-butanol ratio and the reactivity decreased by low $O_2$ concentration.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.8
• /
• pp.824-827
• /
• 1997

Bis(ethylene)rhodium(Ⅰ) chloride dimer reacted with vinylcyclopropane to give σ,η3-allylrhodium(Ⅲ) complex 3. Complex 3 underwent C-C bond cleavage of 8-quinolinyl ethyl ketone 11, to form η3-1,3-dimethylallylrhodium(Ⅲ) complex 8, which was reductively eliminated by trimethyl phosphite to give 8-quinolinyl-1-methylbut-2-enyl ketone (10). More sterically hindered 8-quinolinyl alkyl ketones were allowed to react with complex 3 to afford corresponding alkenes as well as a mixture of complex 8 and η3-1-ethylallyl rhodium(Ⅲ) complex 19, identified as 10 and 8-quinolinyl-pent-2-enyl ketone (20) after reductive elimination. 8-Quinolinyl alkyl ketone bearing a sterically hindered alkyl group showed less reactivity for C-C bond cleavage and higher 20/10 ratio compared with those having a less sterically hindered alkyl group, such as 8-quinolinyl ethyl ketone (11).

• Bulletin of the Korean Chemical Society
• /
• v.21 no.10
• /
• pp.1044-1046
• /
• 2000

Catalytic copolymerization of diethyl dipropargylmalonate (DEDPM) and phenylacetylene (PA) by Mo(CO)6 and (toluene) Mo(CO)3/chloranil has resulted in the expected copolymer consiting of a polyene backbone with five-and/or six-membered rings and th e PPA structure. Both complexes exhibited not only varying degree of catalytic activity depending upon the relative mole ratio of two monomers but also characterize the types of coploymers. The former yields the polyene backbone containing only five-membered rings as well as PA while the latter produces the polymers consisting of both five-and six-membered ring structure. Comparative studies show that Mo(CO)6 exhibits reactivity toward DEDPM alone, thus catalyzing initially metathesis cyclopoly-merization of DEDPM followed by copolymerization with PA while the (toluene)Mo(CO)3/chloranil system shows affinity for both PA and DEDPM.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.3
• /
• pp.164-166
• /
• 1988

7-Dithiocarboxy-3-phenyl-5,6-dihydro imidazo[2,1-b]thiazolium-betaine (2) was prepared by treatment of 3-phenyl-5,6-dihydro imidazo[2,1-b]thiazole (1) with carbon disulfide in acetone at room temperature. On the reaction of 2 with para-substituted phenacyl bromides (4) having the electron withdrawing property by virtue of (+) resonance (R) < (-) inductive (I) or (-) resonance (R), (-) inductive (I) effect, ring transformation product p-substituted-2-[2-[7-(p-substituted benzoyl)-5-thioxo-2,3-dihydro-1H-imidazo[1,2-c] thiazol-1-yl]-2-phenylvinylthio] acetophenone (6) was obtained; however, when R is electron donating grops with (+) resonance (R) > (-) inductive (I) effect the quarternary ammonium salt 7-(p-substituted phenyl) carbonyl methyl-3-phenyl-5,6-dihydro imidazo [2,1-b] thiazolium bromide (8) is formed. The reaction of 2 with unsubstituted-phenacyl bromide (R = H), on the other hand, gives 6a and 8a to the similar ratio, respectively.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.E1
• /
• pp.29-36
• /
• 2002

The selective catalytic reduction (SCR) reaction of promoter catalysts was investigated in this study. A pure anatase type of TiO$_2$ was used as support. Activation measurement of prepared catalysts was practiced on a fixed reactor packing by the glass bead after filling up catalysts in 1/4 inch stainless tube. The reaction temperature was measured by K-type thermocouple and catalyst was heated by electric furnace. The standard compositions of the simulated flue gas mixture in this study were as follows: NO 1,780ppm, NH$_3$1,780ppm, $O_2$1% and $N_2$ as balance gas. In this study, gas analyzer was used to measure the outgassing gas. Catalyst bed was handled for 1hr at 45$0^{\circ}C$, and the reactivity of the various catalyst was determined in a wide temperature range. Conversion of NH$_3$/NO ratio and of $O_2$ concentration was practiced at 1,1.5 and 2, respectively. The respective space velocity were as follows . 10,000, 15,000 and 17,000 hr-1. It was found that the maximum conversion temperature range was in a 5$0^{\circ}C$. It was also found toi be very sensitive at space velocity, $O_2$ concentration, and NH$_3$/NO ratio. We also noticed that the maximum conversion temperature of (W, Mo, Sn) -V$_2$O$_{5}$/TiO$_2$ catalysts was broad. Specially WO$_3$-V$_2$O$_{5}$TiO$_2$2 catalyst appeared nearly 100% conversion at not only above 30$0^{\circ}C$ ut also below 25$0^{\circ}C$. At over 30$0^{\circ}C$, NH$_3$ oxidation decreased with decrease of surface excess oxygen. In addition, WO$_3$-V$_2$O$_{5}$TiO$_2$ catalyst did not appear to affect space velocity, $O_2$ concentration, and NH$_3$/NO ratio.ratio.

• Journal of Hydrogen and New Energy
• /
• v.25 no.4
• /
• pp.344-354
• /
• 2014

Activated charcoal supported nickel molybdenum carbide (carburized Ni-Mo/AC) catalysts were prepared by wet-impregnation followed by temperature-programmed carburization using 20% $CH_4/H_2$ gas. The effects of pH and initial Ni/Mo mole ratio during wet-impregnation step on the characteristics of the carburized Ni-Mo/AC catalysts were investigated using ICP, XRD, XPS, BET and $CO_2$-TPD techniques, and correlated with the catalytic activity of the carburized Ni-Mo/AC in methane dry reforming reaction. Comparison of the results of methane dry reforming reaction kinetics with the results of characterization of the carburized Ni-Mo/AC catalyst showed that the catalytic activity in methane dry reforming reaction was higher at higher initial Ni/Mo mole ratio or at lower pH(3~natural value). This phenomenon was related to the crystal size of metallic Ni in the carburized Ni-Mo/AC catalyst.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.217-222
• /
• 2012

The synthesis of dimethyl carbonate(DMC) is a promising reaction for the use of naturally abundant carbon dioxide. DMC has gained considerable interest owing to its versatile chemical reactivity and unique properties such as high oxygen content, low toxicity, and excellent biodegradability. In this study, the synthesis of DMC through the transesterification of ethylene carbonate(EC) with methanol was investigated by using ionic liquid and metal oxide catalysts. The screening test of different catalysts revealed that choline hydroxide ([Choline][OH]) and 1-n-butyl-3-methyl imidazolium hydroxide([BMIm][OH]) had better catalytic performance than metal salts catalysts such as MgO, ZnO and CaO. The effects of reaction parameters such as reaction temperature, MeOH/EC mole ratio, and carbon dioxide pressure on the reactivity of [Choline][OH] catalyst were discussed. High temperature and high MeOH/EC mole ratio were favorable for high conversion of EC. However, the yield of DMC showed a maximum when carbon dioxide pressure was 1.34 MPa, and then it decreased for higher carbon dioxide pressure. Zinc chloride($ZnCl_2$) was used as co-catalyst with the ionic liquid catalyst. The mixed catalyst showed a synergy effect on the EC conversion and DMC yield probably due to the acid-base properties of the catalysts.

• Korean Journal of Clinical Laboratory Science
• /
• v.55 no.1
• /
• pp.45-51
• /
• 2023

Canine parvovirus type 2 (CPV-2) and canine coronavirus (CCoV) are major pathogens that can induce gastroenteritis in dogs. They are highly contagious and have a high morbidity rate. There are no specific treatments available for them to date. Therefore, rapid and accurate diagnosis becomes essential. The rapid diagnostic test (RDT) for animals can be used widely in the field because it is fast and easy to use for diagnosis. Thus, this study aimed to clinically evaluate and confirm the clinical utility of CPV-2/CCoV RDT. The parameters evaluated included the limit of detection (LoD), cross-reactivity, interference, sensitivity, specificity, negative likelihood ratio (NLR), and kappa value. The results revealed that the LoD values for CPV-2 and CCoV were 9.7×10 50% tissue culture infectious dose (TCID₅₀)/mL and 2.5×10² TCID₅₀/mL, respectively. There was no cross-reactivity with nine pathogens or interference by interfering materials. The RDT showed a sensitivity of 90.0%, a specificity of 100.0%, NLR of 0.1, and a kappa value of 0.90 for diagnosing both viruses. In conclusion, CPV-2/CCoV RDT is useful as a screening test because of its high sensitivity, specificity, kappa value, and low NLR.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2593-2597
• /
• 2010

Second-order rate constants ($k_N$) have been measured spectrophotometrically for reactions of 2,4-dinitrophenyl X-substituted benzoates (X = 4-MeO, H and 4-$NO_2$) with a series of Z-substituted pyridines in 80 mol % $H_2O$/20 mol % DMSO at $25.0{\pm}0.1^{\circ}C$. The Br${\o}$nsted-type plots exhibit downward curvature (e.g., $\beta_2$ = 0.89 ~ 0.96 when $pK_a$ < 9.5 while $\beta_1$ = 0.38 ~ 0.46 when $pK_a$ > 9.5), indicating that the reaction proceeds through a stepwise mechanism with a change in rate-determining step (RDS). The ${pK_a}^o$, defined as the $pK_a$ at the center of Br${\o}$nsted curvature, has been analyzed to be 9.5 regardless of the electronic nature of the substituent X in the benzoyl moiety. Dissection of $k_N$ into the microscopic rate constants $k_1$ and $k_2/k_{-1}$ ratio has revealed that $k_1$ is governed by the electronic nature of the substituent X but the $k_2/k_{-1}$ ratio is not. Theoretical calculations also support the argument that the electronic nature of the substituent X in the benzoyl moiety does not influence the $k_2/k_{-1}$ ratio.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.83-91
• /
• 2021

Ladle furnace slag is a byproduct of the steel-making process, and it contains the mineral β-C2Sandtherapid-settingmineral (dependingonwhichreducingagenthasbeenused). Ladle furnace slag is often treated through slow cooling, which causes the slag to lose its reactivity. In this study, the properties of air-quenched CAC and pulverized ladle furnace slag containing gypsum were evaluated, and the optimal mixing ratio was determined for broadening their usage. Consequently, the properties of CAC aredemonstrated by the dissolution of gypsum after a period of three hours and the content of gypsum after a period of one day. The optimal mixing ratio of anhydrate and hemihydrate gypsum is found to be within 30% and that of dihydrate gypsum is found to be higher than 35%. Furthermore, based on the results of CAC with dihydrate gypsum, the applicability of the by-product dihydrate gypsum has been verified.