• Biomolecules & Therapeutics
• /
• 제24권6호
• /
• pp.616-622
• /
• 2016

Baicalein (5,6,7-trihydroxy-2-phenyl-chromen-4-one) is a flavone, a type of flavonoid, originally isolated from the roots of Scutellaria baicalensis. This study evaluated the protective effects of baicalein against oxidative damage-mediated apoptosis induced by ultraviolet B (UVB) radiation in a human keratinocyte cell line (HaCaT). Baicalein absorbed light within the wavelength range of UVB. In addition, baicalein decreased the level of intracellular reactive oxygen species (ROS) in response to UVB radiation. Baicalein protected cells against UVB radiation-induced DNA breaks, 8-isoprostane generation and protein modification in HaCaT cells. Furthermore, baicalein suppressed the apoptotic cell death by UVB radiation. These findings suggest that baicalein protected HaCaT cells against UVB radiation-induced cell damage and apoptosis by absorbing UVB radiation and scavenging ROS.

• Bulletin of the Korean Chemical Society
• /
• 제23권3호
• /
• pp.381-384
• /
• 2002

Second-order-rate constants ($k_N$) have been measured spectrophotometrically for the reactions of 4-nitrophenyl 2-thiophenecarboxylate (1a) with a series of secondary alicyclic amines in H2O containing 20 mole % DMSO at 25.0 $^{\circ}C$ . The ester 1a is less reactive than 4-nitrophenyl 2-furoate (1b) but more reactive than 4-nitrophenyl benzoate (1c) except towards piperazinium ion. The Brønsted-type plots for the aminolyses of 1a, 1b and 1c are linear with a $\beta$nuc value of 0.92, 0.84 and 0.85, respectively, indicating that the replacement of the CH=CH group by a sulfur or an oxygen atom in the benzoyl moiety of 1c does not cause any mechanism change. The reaction of piperidine with a series of substituted phenyl 2-thiophenecarboxylates gives a linear Hammett plot with a large $\rho^-$ value ($\rho^-$ = 3.11) when $\sigma^- $ constants are used. The linear Brønsted and Hammett plots with large $\beta$nuc and $\rho^-$ values suggest that the aminolysis of 1a proceeds via rate-determining break-down of the addition intermediate to the products.

• 센서학회지
• /
• 제6권6호
• /
• pp.430-436
• /
• 1997

SDB웨이퍼를 사용한 압저항 형태의 50 G용 가속도 센서를 실리콘 마이크로머시닝을 사용하여 제조하였다. 이 형태의 가속도 센서는 진동하는 사각형의 매스와 4개의 빔으로 구성되어 있다. 이 구조는 RIE를 이용한 건식식각과 KOH 용액을 이용한 습식식각을 이용하여 제조되었다. 정사각형의 보상구조가 매스 가장자리의 언더에칭에 기인하는 변형을 보상하기 위해 사용되었다. 제조된 센서는 인가된 가속도에 대하여 선형적인 출력전압특성을 보여주고 감도는 0에서 10 G까지 약 $88{\mu}V/V{\cdot}g$이었다.

• 열처리공학회지
• /
• 제13권2호
• /
• pp.71-84
• /
• 2000

A study on adhesion and wear resistance of VC(vanadium carbide) coating on die steels, STD11 and STD61, has been carried out. The VC coating on the die steels was made by immersing them in molten borax bath, a kind of TRD(thermo-reactive deposition and diffusion). Adhesion strength and wear resistance were investigated using scratch test, indentation test and plate-disc test(Ogoshi type) respectively. The influence of sliding distance on the amount of wear has been determined and dominant wear mechanisms has been characterized using optical microscopy, scanning electron microscopy and EDS spectroscopy. The critical adhesion strength($L_c$) between VC coating layer and substrate(STD11) was increased to 60N($L_c$) in the scratch test. In the case of STD61, the strength increased to 24N. The wear resistance of VC coated die steels was excellent because the diffusion layer formed just below the coating layer. The dominant wear mechanism was identified as adhesive wear for VC coating die steels which were worn by combination of cracking and plucking of VC fragments and disc.

• 한국표면공학회지
• /
• 제24권3호
• /
• pp.119-124
• /
• 1991

Recently, the trend of research in hard coating is concentrate on developing the process of ionization rate under low operating pressure, to get the thin film with high adhesion and dense microstructures. In this study ionization rate enhancement type PVD process using permanent magnet is developed, which enhances the ionization rate by confining the plasma suppressing the wall loss of electron. By the result to investigate the characteristic of glow discharge, the ionization rate of this process is enhanced about twice as high as that of triod BARE process (about 26%), and more dense TiN microstructures are obtained in this process. Cylindrical ion energy analyzer is made and attached in front of a quadrupole mass filter for the analysis of the energy distribution of reactive gas and activated gas ions from the plasma zone. To analyze the operation mechanism of ion energy analyzer, computer simulation is performed by calculation the electric field environment using finite element method. By these analyses of ion energy distribution of outcoming ions from the plasma zone, it is found that magnetic field enhances ion kinetic energy as well as ionization rate. The other results of this study is that the foundation of feed-back system is constructed, which automatically control the partial pressure of reactive gas. In can be possible by recording the data of mass spectrum and ion energy analysis using A-D converter.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.367-367
• /
• 2008

Aluminum nitride (AlN) thin films have been deposited on Si substrate by using reactive RF magnetron sputtering method in a gas mixture of Ar and $N_2$ at different $N_2$ concentration. It was found that $N_2$ concentration was varied in the range up to 20-100%, highly c-axis oriented film can be obtained at 50% $N_2$ with full width at half maximum (FWHM) $4.5^{\circ}$. Decrease in surface roughness from 7.5 nm to 4.6 nm found to be associated with decrease in grain size, with $N_2$ concentration; however, the AlN film fabricated at 20% $N_2$ exhibited a granular type of structure with non-uniform grains. The absorption peak was observed around 675 $cm^{-1}$ in fourier transform infrared spectroscopy (FTIR). It is concluded that the AlN film deposited at $N_2$ concentration of 50% exhibited the most desirable properties for the application of high-frequency surface acoustic devices.

• Bulletin of the Korean Chemical Society
• /
• 제28권2호
• /
• pp.220-224
• /
• 2007

Second-order rate constants (kN) have been determined spectrophotometrically for reactions of 2,4-dintrophenyl 2-furoate (2) with a series of alicyclic secondary amines in 80 mol % H2O/20 mol % dimethyl sulfoxide (DMSO) at 25.0 oC. The furoate 2 is more reactive than 2,4-dintrophenyl benzoate (1) toward all the amines studied. The higher acidity of 2-furoic acid (pKa = 3.16) compared with benzoic acid (pKa = 4.20) has been suggested to be responsible for the reactivity order, at least in part. The Brønsted-type plots for the reactions of 1 and 2 are curved downwardly, indicating that the aminolyses of both 1 and 2 proceed through a zwitterionic tetrahedral intermediate (T±) with a change in the rate-determining step on changing the amine basicity. Dissection of the kN values into their microscopic rate constants has revealed that the pKao and k2/k-1 ratios for the reactions of 1 and 2 are identical, indicating that the nature of the nonleaving group (i.e., benzoyl and 2-furoyl) does not affect the reaction mechanism. The k1 values have been found to be larger for the reactions of 2 than for those of 1, which is fully responsible for the fact that the former is more reactive than the latter.

• 제어로봇시스템학회논문지
• /
• 제8권11호
• /
• pp.954-962
• /
• 2002

In a park or street, we can see many people jogging or walking with their dogs tracking their masters. In this study, an entertainment robot that imitates a dog's behavior is created. The robot's task is tracking a moving target that is recognized as the master. In order to design the robot, the ecological approach. in which the robot's goals and surroundings heavily influence its design, is used. A three-wheel type locomotion system is designed as the robot's physical structure which can follow a human jogging in outdoor space like a park. A sensor system which can detect the position of a master for the robot in the outdoor space, is developed. This sensor system consists of a signal transmitter which is at the hand of a master and some sensors which are mounted on the robot. The transmitter emits RF(radio frequency) and ultrasonic signals and the sensors detect the direction and distance from the robot to the transmitter by using the received signals. For the control architecture of the robot, a purely reactive behavior-based method is used in order to increase speed of response. The developed robot is evaluated through experiments conducted in indoor and outdoor environments.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.409-414
• /
• 1999

The influence of ion beam energy and reactive oxygen partial pressure on the electrical and crystallographic characteristics of transition metal oxide compound(Cr0x) film was studied in this paper. Chromium oxide films were prepared onto the coverglass using Ion Beam Sputter Deposition(1BSD) technique according to the processing conditions of the partial pressure of reactive oxygen gas and ion beam energy. Crystallinity and grain size of as-deposited films were analyzed using XRD analysis. Thickness and Resistivity of the films were measured by $\alpha$-step and 4-point probe measurement. As results, according to the XRD, XPS and resistivity measurement, the deposited films were the cermet type films which has a crystal structure including amorphous oxide(a-oxide) phase and metal Cr phase simultaneously. The increasernent of the ion b m energy during the deposition process happened to decreasernent of metal Cr grain size and the rapid change of resistivity above the critical $O_2$ partial pressure.

• 한국전자통신학회논문지
• /
• 제8권10호
• /
• pp.1595-1600
• /
• 2013

기존의 기기분석에 있어서의 미비한 점을 보완한 물질 분석 과정에서 주요 성분의 파괴를 최소화하고져 비파괴형 원적외선 도자기 가마를 이용하여 비파괴형 성분물질을 유지할 수 있는 기기 분석 장치를 개발 하였다. 또한 광폭증폭관(PMT) 기기를 사용하여 뽕잎 차에 함유된 항산화 물질의 형태적 효과를 기존의 기기분석기와 원적외선 도자기 기기를 사용한 것과의 차별화 실험을 통해 그 효과를 측정 하였다. 그 결과 특히 과산화수소를 이용한 항산화 효과를 측정한 결과 성분이 파괴되지 않음을 측정하여 그 효과가 인정 되었기에 이를 보고한다.