• Transactions on Electrical and Electronic Materials
• /
• 제5권3호
• /
• pp.122-125
• /
• 2004

ITO films were deposited on polyethylene terephthalate substrate by a dc reactive magnetron sputtering using rf bias without substrate heater and post-deposition thermal treatment. The dependency of rf substrate bias on plasma sputter processing was investigated to control energetic particles and improve ITO film properties. The substrate was applied negative rf bias voltage from 0 to -80 V. The composition of indium, tin, and oxygen atoms is strongly depended on the rf substrate bias. Oxygen deficiency is the highest at rf bias of -20 V. The electrical and optical properties of ITO films also are dominated obviously by negative rf bias.

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1103-1109
• /
• 2003

Crystalline carbon nitride films have been deposited by RF reactive magnetron sputtering system with negative DC bias. The carbon nitride films deposited on various substrates showed ${\alpha}$- C$_3$N$_4$,${\beta}$-C$_3$N$_4$ and lonsdaleite structures through XRD and FTIR We can find the grain growth of hexagonal structure from SEMI photographs, which is coincident with the theoretical carbon nitride unit cell. When nitrogen gas ratio is 70 % and RF power is 200 W, the growth rate of carbon nitride film on quartz substrate is about 2.1 $\mu\textrm{m}$/hr.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.395-398
• /
• 2000

Reactive radio frequency (RF)magnetron sputter with incident angle has been used to deposit AlN thin film on a crystalline Si substrate. (002)Preferred orientation of AlN thin film has been obtained at low sputtering pressure. Also it has been shown that depostion rate of AIN thin film is affected by fraction Ar and $N_2$ partial pressure. But substrate temperature didn't affect depostion rate of AIN thin film . As sputtering pressure increased preferred orientation degraded. The internal stress changed from tensile stress to compressive stress as fraction of $N_2$ partial pressure increased. At low nitrogen partial pressure cermet$^{[1]}$ AIN thin film is obtained.

• Transactions on Electrical and Electronic Materials
• /
• 제7권5호
• /
• pp.257-261
• /
• 2006

Nano-structured carbon nitride $(CN_x)$ films were prepared by reactive RF magnetron sputtering with a DC bias at various deposition conditions, and the physical and electrical properties were investigated. FTIR spectrum indicated an ${alpha}C_3N_4$ peak in the films. The carbon nitride film deposited on Si substrate had a nano-structured surface morphology. The grain size was about 20 nm and the deposition rate was $1.7{\mu}m/hr$. When the $N_2/Ar$ ratio was 3/7, the level of nitrogen incorporation was 34.3 at%. The film had a low dielectric constant. The metal-insulator-semiconductor (MIS) capacitors that the carbon nitride was deposited as insulators, exhibited a typical C-V characteristics.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.334.1-334.1
• /
• 2014

태양전지, 터치센서와 같이 투명한 전극(TCO: Transparent conducting oxide)이 필요로 하는 곳에는 금속 산화물 형태의 ITO, ZnO, FTO와 같은 투명 전극이 사용된다. 그중에서 FTO는 저렴한 가격과 높은 투과율, 낮은 저항으로 주목을 받고 있다. 뿐만아니라 FTO 박막은 다른 산화물 전도체에 비해 구부림에 강한 저항성을 보여 주고 있다. FTO 박막의 캐리어 전하 생성 원리는 F 원자가 O 원자의 자리를 치환하게 되면서 잉여 전자의 발생으로 전기가 흐를 수 있다. 아직까지는 화학적 조성비에 유리한 CVD를 이용한 증착 방법이 많이 사용되고 있다. 스퍼터 장비 역시 공정 가스에 따라 화학적 조성비 변화가 가능하고 CVD와 비교하여 공정이 간단하며 연속 공정이 쉽고 대면적 적용이 가능하다. 본 실험은 본사에서 R&D용으로 제작한 Daon-1000 S 장비를 사용하였으며 DaON-1000 S는 3개의 2" sputter gun이 장착 되어 있어 co-sputtering이 가능한 장비이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.187-191
• /
• 2006

Sputter deposition followed by surface treatment was studied using reactive RF plasma as a method for preparing titanium oxide $(TiO_2)$ films on the FTO $(SnO_2: F)$ substrate for dye-sensitized solar cells (DSCs). Anatase structure $TiO_2$ films deposited by reactive RF magnetron sputtering under the conditions of $Ar/O_2(5%)$ mixtures, RF power of 600W and substrate temperature of $400^{\circ}C$ were surface-treated by inductive coupled plasma (ICP) with $Ar/O_2$ mixtures at substrate temperature of $400^{\circ}C$, and thus the films were applied to the DSCs. We have chosen a solar cell width as a variable of a large-scaled DSCs and confirmed electric characteristics of an individual cell. As a result, the higher the internal resistance of DSC becomes, the wider the width gets. Internal resistance makes it difficult to collect photoelectron generated from dye. Ultimately up sizing DSC causes the increase of internal resistance and then has a bad effect on the cell characteristics.

• The Korean Journal of Ceramics
• /
• 제4권1호
• /
• pp.9-14
• /
• 1998

Diamond-like carbon(DLC) films were deposited on buffer-layered ZnS substrates by radio frequency plasma enhanced chemical vapor deposition(RF-PECVD) method. Ge and GeC buffer layera were used between DLC and ZnS substrates to promote the adhesion of DLC on ZnS substrates. Ge buffer layers were sputter deposited by RF magnetron sputtering and $GeC^1$ buffer layers were deposited by same method except using acetylene reactive gas. The relatinship between film properties and deposition conditions was investigated using gas pressure, RF power and dc bias voltage as PECVD parameters. The hardness of DLC films were measured by micro Vickers hardness test and the adhesion of DLC films on buffer-layered ZnS substrates were studied by Sebastian V stud pull tester. The optical properties of DLC films on butter-layered ZnS substrates were characterized by ellipsometer and FTIR spectroscopy.

• 한국결정성장학회지
• /
• 제21권2호
• /
• pp.65-69
• /
• 2011

RF 마그네트론 스퍼터링으로 가스조성비와 기판의 온도를 변화시키면서 $Tio_2$ 박막을 성장하였다. XRD, SEM, AFM 및 분광 광도계를 이용하여 박막의 구조와 광학적 특성을 고찰하였다. 박막에는 아나타제 결정성만 관찰되었으며 온도가 높아질수록 회절 피크의 강도가 증가하였다. 산소농도가 증가함에 따라 기둥구조의 결정성장률이 감소되었으며 굴절률과 흡수율은 감소하였다. $Tio_2$ 박막은 300~400oC의 기판온도와 10 %의 $O_2$ 분위기에서 성장한 박막의 표면이 매끄럽고 투과특성이 우수한 $300{\sim}400^{\circ}C$ 박막을 얻을 수 있었다.

• 한국정보통신학회논문지
• /
• 제13권11호
• /
• pp.2385-2390
• /
• 2009

본 연구에서는 C-축 우선 배향 특성을 가지는 N-doped ZnO 박막을 증착하고 그 미세구조의 특성을 분석 비교하였다. ZnO박막은 $N_2O$ 가스 분위기에서 RF reactive magnetron sputtering 시스템을 사용하여 p-Si(100) 웨이퍼 위에 증착되었다. $N_2O$ 가스는 N doping source로 사용되었으며, 전체 가스 유량에 대한 $N_2O$ 가스의 비율 $N_2O/(N_2O+Ar)$과 증착 전력을 증착의 주요 공정 변수로 선택하여 다양한 가스 비율과 증착 전력에 대한 박막의 미세 구조 특성을 비교 분석하였다. 특히, Auger electron spectroscopy (AES)를 이용하여 ZnO 박막 내에 들어가 존재하는 불순물 N의 수직분포를 분석하였고, 여러 가지 증착 조건에서 제작된 ZnO 박막의 표면형상 및 미세구조 특성을 Scanning Electron Microscope (SEM)를 이용하여 분석하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.154-157
• /
• 2006

The counter electrode widely used in DSCs (Dye-sensitized Solar Cells) is constructed of conducting glass substrates coated with Pt films, where the platium acts as a catalyst. Pt counter electrodes in DSCs are one important component. It is expected that characteristics of Pt electrodes strongly depend on fabrication process and its surface condition. In this study, Pt counter electrode surface of DSC is deposited by reactive RF magnetron sputtering under the conditions of Ar 5mtorr, RF power of 120w and substrate temperature of $100^{\circ}C$. Surface morphology of Pt electrodes was investigated by FE-SEM and AFM. And this paper shows our recent results and technology to fabricate the new designed cell with Pt electrodes deposited by sputtering method. We have achieved fill factor 65% and photoelectric conversion efficiency around 2.6% as the best results of new designed DSCs structure.