• Journal of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.475-482
• /
• 1986

Rates and equilibriurn of complex formation between $Ni^{2+}$ and D-penicillamine have been investigated in aqueous solutions. Kinetic study on the complex formation were performed in the pH range of 8∼9 by the use of pressure-jump technique. D-Penicillamine coordinates to the nickel(II) ion utilizing sulfur and nitrogen as donor atoms in the high pH condition (pH 9.2). However, in the pH range of 8.25∼9.07, the stepwise stability constant becomes drastically reduced and the undissociated mercapto group does not participate in bonding. The rate-determining step of the complexation reaction is found to be the release of a water molecule from the inner-coordination sphere of $Ni^{2+}$ ion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.212-212
• /
• 2012

The Coverage dependent attachment of multifunctional groups included in threonine molecules adsorbed to Ge (100)$-2{\times}1$ surface was investigated using core-level photoemission spectroscopy (CLPES) and density functional theory (DFT) calculations. The core-level spectra at a low coverage indicated that the both carboxyl and amine groups participated in the bonding with the Ge (100) surface by "O-H dissociated and N-dative bonded structure". However, at high coverage level, additional adsorption geometry of "O-H dissociation bonded structure" appeared possibly to minimize the steric hindrance between adsorbed molecules. Moreover, the C 1s, N 1s, and O 1s core level spectra confirmed that the carboxyl oxygen is more competitive against the hydroxymethyl oxygen in the adsorption reaction. The adsorption energies calculated using DFT methods suggested that four of six adsorption structures were plausible. These structures were the "O-H dissociated-N dative bonded structure", the "O-H dissociation bonded structure", the "Om-H dissociated-N dative bonded structure", and the "Om-H dissociation bonded structure" (where Om indicates the hydroxymethyl oxygen). These structures are equally likely, according to the adsorption energies alone. Conclusively, we investigate in threonine on Ge (100) surface system that the "O-H dissociated-N dative bonded structure" and the "O-H dissociation bonded structure" are preferred at low coverage and high coverage.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.9
• /
• pp.1323-1328
• /
• 2006

Mesoporous nickel intercalated aluminosilicate nanohybrid has been synthesized through a recombination reaction between the colloidal suspension of exfoliated montmorillonite nanosheets and aqueous nickel acetate solution. According to powder X-ray diffraction and field emission-scanning electron microscopic analyses, the intercalation of nickel species expands significantly the basal spacing of the host montmorillonite clay and the crystallites of the intercalation compound are assembled to form a house-of-card structure. $N_2$ adsorption-desorption isotherm measurements with BJH pore analyses clearly demonstrated that the porosity of the intercalate originates mainly from mesopores (diameter $\sim50\;\AA$) formed by the house-of-card type stacking of clay crystallites. From FT-IR and X-ray absorption spectroscopic analyses, it becomes certain that intercalated nickel ion is stabilized in an isolated $NiO_6$ octahedral unit. The present mesoporous intercalation compound is expected to be applicable as efficient catalysts or absorbents.

• Carbon letters
• /
• v.4 no.2
• /
• pp.69-73
• /
• 2003

In this work, the effect of a direct oxyfluorination on surface and mechanical interfacial properties of PAN-based carbon fibers is investigated. The changes of surface functional groups and chemical composition of the oxyfluorinated carbon fibers are determined by FT-IR and XPS measurements, respectively. ILSS of the composites is also studied in terms of oxyfluorination conditions. As a result, FT-IR exhibits that the carboxyl/ester groups (C=O) at 1632 $cm^{-1} and hydroxyl group (O-H) at 3450 $cm^{-1} are observed in the oxyfluorinated carbon fibers. Especially, the oxyfluorinated carbon fibers have a higher O-H peak intensity than that of the fluorinated ones. XPS result also shows that the surface functional groups, including C-O, C=O, HO-C=O, and C-$F_x$ after oxyfluorination are formed on the carbon fiber surfaces, which are more efficient and reactive to undergo an interfacial reaction to matrix materials. Moreover, the formation of C-$F_x$ physical bonding of the carbon fibers with fluorine increases the surface polarity of the fibers, resulting in increasing ILSS of the composites. This is probably due to the improvement of interfacial adhesion between fibers and matrix resins.

• Journal of the Korean Society of Safety
• /
• v.19 no.2
• /
• pp.6-10
• /
• 2004

The magnetic polishing is the useful method to finish using magnetic power of magnet. This method is one of precision polishing techniques and has an aim of the clean technology using for the pure of gas and inside of the clean pipe for transportation. The magnetic abrasive polishing method is not so common for machine that it tis not spreaded widely. There are rarely researcher in this field because of non-effectiveness of magnetic abrasive. Therefore, in ths paper deals with development of the magnetic abrasive using sludge. In this development, abrasive grain WA and GC used to resin bond fabricated low temperature. And magnetic material was fabricated from the sludge which were crused into 200 mesh and average diameter ${\o}$1.2mm ball type. The XRD analysis result show that only WA and GC abrasive and sludge crystal peaks detected which explains resin bond was not any more chemical reaction. From SEM analysis it tis found that WA and GC abrasive and sludge were stron bonding with each other by bond.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.2 s.115
• /
• pp.43-51
• /
• 2006

Starch is widely used as an adhesive material in the paper and corrugated board industry. The adhesion problem of corrugated board is categorized by two main parts called zipper board and white glue line. The object of this research is to investigate the factors affecting the adhesion problem by the gelatinization of various starch solutions and dynamic penetration properties measurements of various commercial base paper and handsheets. Flow property of starch solution is affected by sodium hydroxide addition and reaction level. Absorption property of commercial base papers and handsheets is affected by sizing and stock composition. Optimum bonding between top/bottom liners and corrugated medium is accomplished by acceptable flow viscosity of mixed starch solution and proper adsorption characteristic of base paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1279-1283
• /
• 2012

SiOC films made by the inductive coupled CVD with dimethyldimethoxysilane were analyzed to find out the correlation between the chemical and optical properties by using the Foruier transform infrared spectroscopy, spectrophotometer and ellipsometer. The bonding structure of SiOC film was formed during the depositeion and the adhesion was increased after annealing process. SiOC film decreased the polarization by the chemical reaction between alkyl group and hydroxyl group, and increased the degree of amorphism. For the range of 950 cm-1 in FTIR spectra, the spectra were divided into two types depending on polar sites. The refractive index of SiOC film with the lowest polarization increased and the thickness of that decreased.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2065-2070
• /
• 2010

The diluted PMMA treated $SiO_2$ films as an passivation materials for semiconductor devices was researched by using the FTIR spectra. The diluted PMMA solution with various ratios changed the surface of $SiO_2$ film as the hydrophilic, hydrophobic or hybrid type properties. The sample 7 with little carbon content showed dramatically the chemical variation by the FTIR spectra analysis. Beacuse the little carbon with electrons decreased the polarity and surface energy on the $SiO_2$ film, and then became a stable bonding structure and decreased the leakage current. The FTIR spectra can define the detail variation due to the chemical reaction on the organic thin film, and help to research the characteristic of the organic materials.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.545-550
• /
• 2002

In order to ensure the signal could be transported cocrrectly, the microwave devices made of Aluminmn alloys must be assembled and brazed flaw-freely. In this paper, a new approach of using contact reactive brazing (CRB) process to realize the compact brazing of Aluminum alloys was put forward. The reason for this is that CRB, which realizes bonding depending on the liquid alloy produced by metallurgy reaction between the materials to be joined, overcomes the limitation of traditional brazing that the macroscopically disorganized filling flow of liquid filler metal would result in defects in brazed seam. Joint ofLF21 (AA3003) with the compactness of over 95% was brazed by the method of CRB using Si powder as an interlayer. At last, the influence of the physical parameter related to the Si powder interlayer on the compactness of the joints was investigated in detail.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4B
• /
• pp.514-518
• /
• 1999

Gold (Au) is not supposed to react with sapphire(single crystalline ) under thermodynamic equillibrium, therefore, a strong adhesion between these two dissimilar materials is not expected. However, pull test showed that the gold film sputter-deposited onto annealed and pre-sputtered sapphire exhibited very strong adhesion even without post-deposition annealing. Strongly and weakly adhered samples as a result of the pull testing were selected to investigate the adhesion mechanisms with Auger electron spectroscopy. The Au/ interfaces were analyzed using a new technique that probes the interface on the film using Auger electron escape depth. It revealed that one or two monolayers of Au-Al-O compound formed at the Au/Sapphire interface when AES in the UHV chamber. It showed that metallic aluminum was detected on the surface of sapphire substrates after irradiating for 3 min. with 7keV Ar+ -ions. These results agree with TRIM calculations that yield preferential ion-beam etching. It is concluded that the formation of Au-Al-O compound, which is responsible for the strong metal-ceramic bonding, is due to ion-induced cleaning and reduction of the sapphire surface, and the kinetic energy of depositing gold atoms, molecules, and micro-particles as a driving force for the inter-facial reaction.