• 센서학회지
• /
• 제17권1호
• /
• pp.9-14
• /
• 2008

In this paper, the gas responses of tungsten oxide films prepared by anodic reaction was discussed. Sensing electrodes and heating electrodes were patterned by photolithography method on quartz substrate. Porous tungsten oxide was fabricated in electrolyte solutions of 5 % HF (HF :$C_2H_6OH:H_2O$=3 : 2 : 20) by anodic reaction. The anodic reaction with metal (platinum wire) as a cathode and the sensing device as an anode was conducted under the various reaction times (1-10 min) at 10 mA/$cm^2$ The surface structure and morphology of the fabricated sensor have been analysed by X-ray diffraction (XRD) and field-emission scanning electron microscopy (FE-SEM). All the peaks of XRD results were well indexed to the pure phase pattern. The average diameter of the porous tungsten oxide surface were ranged about 100 nm. The fabricaed sensor showed good sensitivity to 200 ppm toluene at operating temperature of $250^{\circ}C$.

• 폴리머
• /
• 제28권5호
• /
• pp.391-396
• /
• 2004

기존의 에폭시/실리카 나노복합재료의 제조 방법에서 나타나는 문제점인 경화 반응 중의 휘발성 부산물 생성에 의한 미세기공 형성 및 치수 불안전성 등을 극복하고자 Si-N 전구체를 사용한 새로운 방법을 제안하고자 한다. 실리카 전구체로 부산물이 형성되지 않는 메틸트리페닐실란 (MTPS)을 합성하고 이를 이용하여 솔-젤 반응과 에폭시 경화 반응이 병행되는 동시 복합화 반응을 통하여 무기상의 고른 분산상태를 지닌 에폭시/실리카 나노복합재료를 제조하였으며, 이로부터 뛰어난 투명성뿐 아니라 기계적 물성과 열적특성에서 탁월한 물성의 증가를 얻을 수 있었다.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.267-273
• /
• 2018

Hydrothermal liquefaction of Chlorella vulgaris feedstock containing 80% (w/w) water was conducted in a batch reactor as a function of temperature (300, 325 and $350^{\circ}C$) and reaction times (5, 10 and 30 min). The biocrude yield, elemental composition and higher heating value obtained for various reaction conditions helped to predict the optimum conditions for maximizing energy recovery. To optimize the recovery of inorganic nutrients, we further investigated the effect of reaction conditions on the ammonium ($NH_4{^+}$), phosphate ($PO_4{^{3-}}$), nitrate ($NO_3{^-}$) and nitrite ($NO_2{^-}$) concentrations in the aqueous phase. A maximum energy recovery of 78% was obtained at $350^{\circ}C$ and 5 min, with a high energy density of 34.3 MJ/kg and lower contents of oxygen. For the recovery of inorganic nutrients, shorter reaction times achieved higher phosphorus recovery, with maximum recovery being 53% at $350^{\circ}C$ and 5 min. Our results indicate that the reaction condition of $350^{\circ}C$ for 5 min was optimal for maximizing energy recovery with improved quality, at the same time achieving a high phosphorus recovery.

• 한국세라믹학회지
• /
• 제41권10호
• /
• pp.756-765
• /
• 2004

Colemanite($Ca_2B_6O_{11}{\cdot}5H_2O$)원광을 황산과 반응시켜 붕산을 추출하는 방법과 그 반응 기구에 대하여 연구하였다. colemanite에 황산을 첨가하고 가열하여 colemanite의 칼슘 성분을 황산칼슘으로 분리하고 붕산을 추출할 때, 첨가하는 황산 첨가량 은 colemanite에 존재하는 Ca 성분을 분리할 때 필요한 화학 양론적인 양보다 많아야 되며, 또한 초기 pH가 5 미만이어야 대부분의 colemanite가 분해되었다. 붕산으로 추출 시 영향을 주는 인자로는 분해온도, 분해시간, 황산 첨가량, 황산암모늄 첨가량, pH. 농축 정도 및 건조온도와 시간이었다. 황산 첨가 시 colemanite에 포함되어 있는 불순물 중 CaO와 MgO는 황산과 반응하여 침전을 형성하고, $SiO_2$는 불용 성분으로 황산칼슘과 함께 분리되고, $Al_2O_3,\;Fe_2O_3,\;TiO_2,\;Na_2O$ 등은 황산과 반응하여 액상 상태로 존재하였다. 이 액상에 암모니아를 첨가하여 존재하는 나머지 불순물을 수산화물 형태로 분리, 석출하였으며, pH 조정과 산성화, 농축, 재결정화 과정을 통하여 붕산을 제조하였다.

• 한국세라믹학회지
• /
• 제28권6호
• /
• pp.443-450
• /
• 1991

Microstructures of tantalum oxide, anodic-oxidized in oxalic acid, are shown to be related to voltage-time characteristics during formation reaction. It is observed that a crystalline phase transformed from an amorphous phase is recrystallized in the presence of the high electric field within the film, and this recrystallized film has a very porous microstructure. From the results of the XRD, the nonlinearity observed after the first spark voltage is recognized to be due to the local crystallization.

• 한국세라믹학회지
• /
• 제44권3호
• /
• pp.133-136
• /
• 2007

The crystal morphology of hydroxyapatite [HAp] phase in gelatin [GEL] matrices was investigated with the condition of a GEL precursor treatment in an aqueous solution of $H_{3}PO_{4}$ at $37-80^{\circ}C$. Needle-shaped nanocomposite particles were prepared through a dynamic reaction during a coprecipitation process using a phosphoric GEL solution. Various types of mineralized morphology appeared with a phosphorylated condition of the GEL solution. HAp/GEL nanocomposite slurries showed the existence of an octacalcium phosphate [OCP] phase during the process.

• 한국세라믹학회지
• /
• 제29권1호
• /
• pp.41-47
• /
• 1992

Phase transition and electrical conductivity of homologous series phases Lan+1NinO3n+1 (n=1,2,3, …, $\infty$) have been investigated. These La-Ni-O chemical compounds were synthesized by solid state reaction. The compound LaNiO3 was thermally stable in air only up to about 1120 K and above this temperature decomposed into homologous series phases Lan+1NinO3n+1 and NiO.

• 통합자연과학논문집
• /
• 제13권2호
• /
• pp.41-46
• /
• 2020

A study is reported about the synthesis processes of various silacrown ether by the reaction of alkoxysilanes with polyethylene glycols (PEG) through transesterification. Crown ether-functionalized carbosilane dendrimers and hybrid crown ethers are also discussed. We will also address the solubility enhancement, phase-transfer catalysis of different silacrown as well as their application as Ion-selective electrodes (ISEs) and as active phase of PVC electrodes for the development of potentiometric sensors for detection of alkali-Ions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.867-870
• /
• 2007

In order to solve image sticking phenomena, the gas-phase and liquid-phase interfacial reactions of photosensitive polyimide can annihilate photoreactive carbon-carbon double bonds, which remain after photo-alignment process. The annihilation processes dramatically affect residual DC and photochemical reorientation of photoactive functional groups.

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.695-699
• /
• 2009

A short and efficient synthesis of (2S,3S)-safingol from commercially available D-ribo-(2S,3S,4R)-phytosphingosine is described. The highlights of the synthesis are a stereoselective one-pot transformation of a diol into an epoxide under phase transfer catalytic conditions and a regioselective epoxide-opening reduction with a hydride reagent.