In this study, the method considering the influence of the high-rise building in urban rainfall-runoff analysis using SWMM was proposed. The method proposed in this study was to calculate the time of reaching the surface of the rainwater considering the size and height of the building, and to modify the basin width to reflect this. In the method proposed in this study, the concentration time considering the size and height of the building is calculated and based on this time the basin width is modified. The proposed method was verified with the experimental result of Isidoro et al. (2012). As a result, the proposed method was found to be valid since the simulated hydrograph was fairly identical to experimental result. In both hydrographs, it was confirmed that the change of the discharge characteristic, such as decrease of peak discharge and lag of peak time, over increasing density of the building was similar each other.
This study was conducted to find the shortest optimum time for taking oral temperature and axillary temperature, which does not affect reliability of body temperature. For this purpose, first, the time at which all the samples are reaching maximum temperature is identified Second, the mean maximum temperature is compared with the mean temperature of each consecutive measurement by T-test to find the time at which no significant changes in temperature occurs along time sequence. Third, optimum temperatures are set at points of -0.2℉, -0.4℉, -0.6℉, -0.8℉, -1.0℉, -1.2℉, -1.4℉, from maximum temperature. A point of time at which 90% of samples reach at optimum temperature is identified and defined as optimum time. The study sample, a total of 164 cases were divided into two groups according to their measured body temperature. The group with body temperature below 37 $^{\circ}C$(A group) and above 37$^{\circ}$1'C (B group) were compared on the time required to reach maximum temperature and optimum temperature. The results are as follow. 1. The time required for total sample to reach maximum temperature was 13 minutes in both groups by oral method, 15 minutes in A group and 13 minutes in B group by axillary method. Time required for 90 % of cases reach maximum temperature by oral method was 10 minutes in both group. By axillary method, 12 minutes in A group. (Ref: table 2) 2. Statistical analysis by means of T-test, the time which does not show a significant change by oral method were 12 minutes in A group and 11 minutes in B group, and by axillary method 14 minutes in A group and 11 minutes in B group. (Ref: table 5, 6.) 3. Where optimum temperature was defined as maximum temperature minus 0.2 ℉, optimum time was found 8 minutes in both groups by oral method, and 11 minutes in A group and 9 minutes in B group by axillary method 4. Where optimum temperature was defined as maximum temperature minus 0.4 ℉, optimum time was found 7 minutes in A group and 6 minutes in B group by oral method, and 9 minutes in A group and 7 minutes in B group by axillary method 5. Where optimum temperature was defined as maximum temperature minus 0.8 ℉, optimum time was found 6 minutes in A group and 6 minutes in B group by axillary method (Ref: table 7, 8, 9, 10) 6. The commonly practiced temperature taking time, 3 minutes in oral method and 5 minutes in axillary method can be accepted as pertinent when physiological variation of body temperature at the mean level of -1, 2 ℉ is accepted. 7. The difference in time required to resister maximum temperature was compared between the group with body temperature below 37$^{\circ}C$ and above 37$^{\circ}$1'C, and found no significant difference in oral mettled and 1 - 4 minute difference in axillary method with shorter time requirement in feverish group.
Park, Soon-Young;Nam, Chang-Ho;Moon, In-Sang;Seol, Woo-Seok
Aerospace Engineering and Technology
/
v.4
no.2
/
pp.142-152
/
2005
There are two definite objects for developing the startup transient of liquid rocket engine. One is to achieve the repeatability of startup to ensure higher reliability, and the other is to reduce the time of the startup transient. Typically in the initial phase of engine development as we are currently opposing, it is hard to estimate engine startup time due to the lack of experiences. In this work, a startup transient analysis tool was developed with the introduction of the mathematical model for each component of pump-fed liquid rocket engine system. Startup transient was investigated for a 25 ton class gas generator cycle engine to find necessary time for reaching steady state from startup and this enabled to reveal dynamic characteristics of the engine.
Park, Choon-Gul;Kim, Seong-Il;Jeong, Ki-Tae;Lee, Young-Seok
Journal of KIISE:Information Networking
/
v.35
no.5
/
pp.367-373
/
2008
Recently, the NAT middlebox widely deployed in the home network environment prohibits DM operations from reaching user devices behind NAT. In this article, we focus on NAT issues to manage home network devices. Particularly, we discuss standardization efforts, and present our proposal to deploy DM services for VoIP and IPTV devices under NAT. By slightly changing behaviors of Simple Network Management Protocol (SNMP) Manager and Agent, and defining additional Management Objects (MOs) to gather NAT binding information, we could solve the NAT traversal problem under symmetric NAT. Moreover, we propose an enhanced method to search the UDP hole binding time of the NAT box. We applied our method to randomly selected 22 VoIP devices out of 194 NATed hosts in the real broadband network and have achieved 99% of the success ratio for exchanging SNMP request messages and 26% of enhancement for searching the UDP hole binding time.
Jeon, B.T.;Kim, M.H.;Lee, S.M.;Thomas, David G.;Moon, S.H.
Asian-Australasian Journal of Animal Sciences
/
v.19
no.9
/
pp.1298-1304
/
2006
The aim of this study was to provide basic haematological information to allow improved nutritional management for velvet production in spotted deer (Cervus nippon) by investigating biochemical changes in blood values during the antler growth period. Blood samples, obtained from the jugular vein of twenty-five deer, were taken every 10 days from casting (day 0) to harvesting (day 50) of velvet antler. Negligible changes were found in the concentrations of total protein, albumin, and creatinine during the antler growth period, but there were significant changes in the concentrations of urea (p<0.05) and uric acid (p<0.01). The concentration of triglyceride was significantly higher (p<0.05) during the antler growth period compared to casting time, while serum high-density lipoprotein concentrations were low and remained unchanged during the antler growth period. Serum glucose concentration increased (p<0.05) significantly and was slightly changeable during antler growth. The serum concentrations of Ca and P did not fluctuate during antler growth, while those of Na, K and Cl showed slight differences between the time of casting and the rest of the antler growth period. No significant changes in concentrations of AST, ALT, amylase, CK, GGT and LDH were detected during the antler growth period. However, the concentration of ALK-P increased during antler growth reaching its peak on day 50 after casting. We found a significant difference in the concentration of ALK-P between the time of casting and the rest of the antler growth period (p<0.01). Consequently, antler growth was associated with mild changes in measured serum biochemical values with the exception of ALK-P activity in spotted deer.
Park, Beomyeong;Lee, Jimin;Park, Kyungsik;Lee, Sangyup;Lee, Eunkyu;Park, Jaeheung
The Journal of Korea Robotics Society
/
v.12
no.3
/
pp.306-312
/
2017
Recently, development of robot technology has been actively investigated that industrial robots are used in various other fields. However, the interface of the industrial robot is limited to the planned and manipulated path according to the target point and reaching time of the robot arm. Thus, it is not easy to create or change the various paths of the robot arm in other applications, and it is not easy to control the robot so that the robot arm passes the specific point precisely at the desired time during the course of the path. In order to overcome these limitations, this paper proposes a new-media content management platform that can manipulate 6 DOF industrial robot arm using 3D game engine. In this platform, the user can directly generate the motion of the robot arm in the UI based on the 3D game engine, and can drive the robot in real time with the generated motion. The proposed platform was verified using 3D game engine Unity3D and KUKA KR-120 robot.
Lee Mi Jin;Kim Hyung Min;Kim Young Min;Lee Won Jae;So Byung Hak;Kim Se Kyung
Journal of The Korean Society of Clinical Toxicology
/
v.1
no.1
/
pp.27-33
/
2003
Purpose: According as the accessibility about drugs becomes various, the occurrence of drug intoxication is increasing. Since report that doxylamine causes rhabdomyolysis often, drug-induced rhabdomyolysis is one of the most important complications in patients with drug intoxication. Acute renal failure (ARF)'s availability is important to the management in rhabdomyolysis, but report about rhabdomyolysis or ARF occurrence for whole intoxicated drugs is lacking up to now. Methods: This research did to 61 patient who had rhabdomyolysis of drug intoxication. First, object patients were divided into two gruops: doxylamine-ingested (Group I) vs non-doxylamine ingested (Group II). And then we analyzed on the early patient's clinical events and laboratory data. We used ROC curve to recognize'the early clinical factors that could forecast ARF appearance among these patients in addition. Results: Almost rhabdomyolysis was happened by doxylamine in drug intoxication ($55.7\%$). However, as compared to group II, group I showed better clinical course, lesser ARF occurrence and hemodialysis requirement. In group II, time was longer in hospital reaching from intoxication, the ARF occurrence rate was higher ($52.6\%$). Analyzing the ROC curve to useful initial factors, they were creatinine, uric acid and interval time from ingestion to hospital. These cut-off values were 1.44 mg/dL, 6.8 mg/dL and 5 hrs. Sensitivity for ARF estimate was $100\%$, specificity $69-98\%$. Conclusion: Compared to group II, Doxylamine-ingested group showed good clinical course. Creatinine, uric acid, interval time from ingestion to hospital aided in ARF estimate in drug-induced rhabdomyolysis.
The domestic mold industry is composed of 6,560 small and medium sized mold companies as of 2015. The structure of mold industry centered on less than 10 people in the past has been improved in the direction of increasing number of medium and large scale companies with more than 20 competitors with global competitiveness and has maintained its position as the world's second largest mold exporter with global competitiveness. Nevertheless, the manpower structure and corporate competitiveness structure of the mold industry is very high, with the proportion of production manpower reaching 70% and shortage rate of 10% or more in order to respond to the orders of customers. However, the development base for new employees with technological skills required by the industrial field is poor, and the inflow of young people is very limited due to factors such as the avoidance of small and medium enterprises and production jobs. It is expected that the labor shortage of mold enterprises will be further increased in the future. In the mold industry, due to the characteristics of small quantity multi-product production corresponding to the demand of the consumer, many production processes are individually and independently carried out, resulting in low labor productivity, and the structural time required for the worker to increase the working time Due to limitations, the working hours per week of the employees are about 50 hours. The implementation of the working time reduction bill, which is recently promoted by the government, is a crisis factor. In order to cultivate the mold industry, it is necessary to expand the base of molds to meet the intensification of global competition, the convergence of technologies to actively respond to the restructuring of the industrial structure, and the response to the new industry, It is necessary to improve labor productivity through policies such as development and dissemination of system, and to secure price, delivery and quality competitiveness in global market.
Estate M. Sokhadze;Lee, kyung-Hwa;Lee, Jong-Mee;Oh, Jong-In;Sohn, Jin-Hun
Proceedings of the Korean Society for Emotion and Sensibility Conference
/
2000.04a
/
pp.290-300
/
2000
One of the most important topics in attentional and emotional modulation of cardiac responses is time course of cardiac chronotropic response. The reason lies in dual innervation of heart, which leads to occurrence of several phases of cardiac response during exposure to affective stimuli, determined by the balance of sympathetic and parasympathetic influences. Cardiac chronotropic reactivity thus represents quite effective measure capable to trace the moment when attending and orienting processes (i.e., sensory intake of stimulus) prime relevant behavioral response (ile., emotion with approach or avoidance tendencies). The aim of this study was to find the time course of heart rate (HR) responses typical for negative (disgust, surprise, fear, anger) and positive (happiness, pleasant erotic) affective pictures and to identify cardiac response dissociation for emotions with different action tendencies such as "approach" (surprise, anger, happiness) and "avoidance" (fear, sadness, disgust). Forty college students participated in this study where cardiac responses to slides from IAPS intended to evoke basic emotions (surprise, fear, anger, sadness, disgust, happiness, pleasant-erotic). Inter-beat intervals of HR were analyzed on every 10 sec basis during 60 sec long exposure to affective visual stimuli. Obtained results demonstrated that differentiation was observed at the very first 10s of exposure (anger-fear, surprise-sad, surprise-erotic, surprise-happiness paris), reaching the peak of dissociation at 30s (same pairs plus surprise-disgust and surprise-fear) and was still effective for some pairs (surprise-erotic, surprise-sad) even at 50s and 60s. discussed are potential cardiac autonomic mechanisms underlying attention and emotion processes evoked by affective stimulation and theoretical considerations implicated to understand the role of differential cardiac reactivity in the behavioral context (e.g., approach-avoidance tendencies, orienting-defense responses).
Journal of the Korean institute of surface engineering
/
v.1
no.1
/
pp.5-13
/
1967
Up to this date, numerous methods of analysis of electropling solutions are published. Some, however, need lots of works before reaching final results, or require high technique and special instruments, and also some are unaccurate due to unclearnes of end point. Like our undevelop countries, technicians of electroplating shops are most high school graduates or under, and have not much knowledge on chemistry. Furthermore, those technicians have to control their plating solutions by themselves without having enough analytical laboratory equipment . Therefore, in this paper the simplest, besides accurate method is investigated after comparing numerous methods published. Among the methods of copper determinations from acid and alkaline copper plating baths, EDTA titration method are chosen, due to these methods are the simpest and fastest for the evaluation of metal content, without requirng any special instrument. For acid copper solutions, chelate titrations were accurate enough. Since the end point of titration of chelate method is variable according to the kind of indicators and other metal's coexisitence as well as solution component, many difficulties were encountered from cyanide copper, on the contrary of acid copper bath. PAN , PV, and MX indicators were tried , but it is found that MX is the best. In chyanide solution ,due to cyanide is the masking reagent , elimination of this component is essential , and finally found that elimination CN-by precipitation with AgNO$_3$ solution was the simplest and the most accurate way among others. This method was very accurate for the new plating solutions even coexistence with organic brightners. However used solutions for long months running have to be predetermined the accurate copper value by thiosulfate method form time to time, before chelate titration by means of AgNO$_3$ precipitation. Always some constant deviations will be seen according to the solutions nature. Therefore those deviation values have to be compensated each time.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.