• Journal of Powder Materials
• /
• v.18 no.4
• /
• pp.378-384
• /
• 2011

In this research, the indium dissolution properties of the waste LCD panel powders were investigated as a function of milling time fabricated by high-energy ball milling (HEBM) process. The particle morphology of waste LCD panel powders changed from sharp and irregular shape of initial cullet to spherical shape with an increase in milling time. The particle size quickly decreased to 15 ${\mu}m$ until the first minute, then decreased gradually about 6 ${\mu}m$ with presence of agglomerated particles after 5 minutes, which increased gradually reaching a uniform size of 13 ${\mu}m$ consist of agglomerated particles after 30 minutes. The glass recovery, after dissolution, was over 99% at initial cullet, which decreased to 90.1 and 78.6% with increasing milling time of 1 and 30 minute respectively, due to a loss in remaining powder of the surface ball and jar, as well as the filter paper. The dissolution amount of indium out of the initial cullet was 208 ppm before milling, turning into 223 ppm for the mechanically milled powder after 1 minute, and nearly 146~125 ppm with further increase in milling time because of the reaction surface decrease of powders due to agglomeration. With this process, maximum dissolving indium amount (223 ppm) could be achieved at a particle size of 15 ${\mu}m$ with 1 minute of milling.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.1
• /
• pp.441-447
• /
• 2014

Background: Multi-state models are appropriate for cancer studies such as gastrectomy which have high mortality statistics. These models can be used to better describe the natural disease process. But reaching that goal requires making assumptions like Markov and homogeneity with time. The present study aims to investigate these hypotheses. Materials and Methods: Data from 330 patients with gastric cancer undergoing surgery at Iran Cancer Institute from 1995 to 1999 were analyzed. To assess Markov assumption and time homogeneity in modeling transition rates among states of multi-state model, Cox-Snell residuals, Akaikie information criteria and Schoenfeld residuals were used, respectively. Results: The assessment of Markov assumption based on Cox-Snell residuals and Akaikie information criterion showed that Markov assumption was not held just for transition rate of relapse (state 1 ${\rightarrow}$ state 2) and for other transition rates - death hazard without relapse (state 1 ${\rightarrow}$ state 3) and death hazard with relapse (state 2 ${\rightarrow}$ state 3) - this assumption could also be made. Moreover, the assessment of time homogeneity assumption based on Schoenfeld residuals revealed that this assumption - regarding the general test and each of the variables in the model- was held just for relapse (state 1 ${\rightarrow}$ state 2) and death hazard with a relapse (state 2 ${\rightarrow}$ state 3). Conclusions: Most researchers take account of assumptions such as Markov and time homogeneity in modeling transition rates. These assumptions can make the multi-state model simpler but if these assumptions are not made, they will lead to incorrect inferences and improper fitting.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7B
• /
• pp.642-651
• /
• 2006

In ad-hoc network, the most of existing packet scheduling schemes provides throughput-based fairness. To provide throughput-based fairness, it basically supposes that the channel capacity is fixed. But, the supposing that the channel capacity is fixed is not appropriate because IEEE 802.11b and 802.11g which are normally used for organizing ad-hoc network can provide various data rate according to channel conditions. So, we define time-based fairness for each flow to consider multi-rate and suggest the MRADPS reaching the defined time-based fairness. Simulation result shows that MRADPS improves the total network throughput in ad-hoc network with providing time-based fairness to each flow.

• Journal of Powder Materials
• /
• v.17 no.4
• /
• pp.302-311
• /
• 2010

In this research, the refinement behavior of the coarse magnesium powders fabricated by gas atomization was investigated as a function of milling time using a short duration high-energy ball milling equipment, which produces fine powders by means of an ultra high-energy within a short duration. The microstructure, hardness, and formability of the powders were investigated as a function of milling time using X-ray diffraction, scanning electron microscopy, Vickers micro-hardness tester and magnetic pulsed compaction. The particle morphology of Mg powders changed from spherical particles of feed metals to irregular oval particles, then platetype particles, with increasing milling time. Due to having HCP structure, deformation occurs due to the existence of the easily breakable C-axis perpendicular to the base, resulting in producing plate-type powders. With increasing milling time, the particle size increased until 5 minutes, then decreased gradually reaching a uniform size of about 50 micrometer after 20 minutes. The relative density of the initial power was 98% before milling, and mechanically milled powder was 92~94% with increase milling time (1~5 min) then it increased to 99% after milling for 20 minutes because of the change in particle shapes.

• Hip & pelvis
• /
• v.35 no.3
• /
• pp.206-215
• /
• 2023

Purpose: Delay in performance of hip fracture surgery can be caused by medical and/or administrative reasons. Although early surgery is recommended, it is unclear what constitutes a delayed surgery and whether the impact of delayed surgery can differ depending on the reason for the delay. Materials and Methods: A total of 269 consecutive hip fracture patients over 50 years of age who underwent surgery were prospectively enrolled. They were divided into two groups: early and delayed (time from reaching the hospital to surgery less than or more than 48 hours). Patients were also categorized as fit or unfit based on anesthetic fitness. One-year mortality was recorded, and regression analyses were performed to assess the impact of delay on mortality. Results: A total of 153 patients (56.9%) had delayed surgery with a mean time to surgery of 87±70 hours. A total of 115 patients (42.8%) were considered medically fit to undergo surgery. No difference in one-year mortality was observed between patients with early surgery and those with delayed surgery (P=0.854). However, when assessment of the time to surgery was performed in a continuous manner, mortality increased with prolonged time to surgery, particularly in unfit patients, and higher mortality was observed when the delay exceeded six days (fit: P=0.117; unfit: P=0.035). Conclusion: The effect of delay on mortality was predominantly observed in patients who were not considered medically fit, suggesting that surgical delays might have a greater impact on patients with medical reasons for delay.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.749-753
• /
• 2008

Proprioception defined it as the ability to detect, the spatial position or movement of joints using balance, power of the muscle, agility in the internal parts of the body. In existing study for improvement of proprioception, reaching task training provided a feedback; the assessment was not provided a feedback. But, this has problem that it can not guide a proprioception from situation with visual feedback. Virtual reality technique can solve the problem of way providing feedback during training. In this study, we developed proprioception training program using virtual reality and pilot study is performed. VR task were composed three modes. In mode 1, real-time movement of the body was provided using visual feedback. In mode 2, body position was provided using visual feedback when participant have specific response. And in mode 3, body position was not provided. VR task is performed five sessions at each mode and one session performed one by one a three target. In the result of this study, the moving time toward the target from mode 3 was smaller than the moving time toward the target from mode 1 (p= 0.001). The correlation was statistically significant between mode 2 and mode 3 while be offering visual feedback position of mode 2 1session. But, the correlation was not statistically significant between mode 2 and mode 3 after be offered visual feedback position of mode2 1session (p = 0.012). Training environment of mode 1 shows which training used visual feedback than proprioception. Mode2 can execute training of proprioception because first session acquires visual feedback by proprioception. The next study will be verification of the system for training or assessment by clinical experiment.

• KSBB Journal
• /
• v.9 no.1
• /
• pp.26-34
• /
• 1994

When effects of exogenous hormone on hairy root cultures of Raphanus sativs cv. Chungpihongsim examined, the highest anthocyanin synthesis and disorganization were observed when 2, 4-D was supplemented to the culture medium Cytokinins showed early weak induction after transfer and ABA showed inhibitory effect and GA3 showed no effects in anthocyanin synthesis. Hormones except for 2, 4-D in 1 mg/$\ell$ concentration did not induce disorganization of hairy root and retarded growth of hairy root. Time-course changes in anthocyanin synthesis, phenylalanine ammonia-lyase activity and chalcone synthase activity were examined in culture condition contalning 2, 4-D and kinetin. In a medium containing 2, 4-D, anthocyanin synthesis began to increase on the 9th day and reaching maxima on the 18th day after transfer. Maximum peak of PAL activity appeared on the 3-9th day and another minor peak appeared on the 18th day. CHS activity increased from 9th day, reaching maximum on the 18th day and remained at a relatively high level for culture period. In a medium containing kinetin, anthocyanin synthesis increased temporarily on the 6-9th days, early days after transfer and maintained at a low level for remaining culture period. Peak of PAL activity appeared on the 6th day and CHS activity increased from the 6th days, reaching maxima about 18th day and remained at a relatively high level. In particular, addition of kinetin after preculture in hormone free medium for 2 weeks which was thought of wound healing period showed no effects in anthocyanin synthesis. This results showed that stimulation of anthocyanin synthesis by 2, 4-D and kinetin was meaningfully connected with changes of PAL, CHS activity, and then suggested rate-limiting role of CHS on anthocyanin synthesis in that there is close correlation between anthocyanin synthesis and changes of CHS activity in time-course. Besides, it is considered that cytoklnins involving kinetin stimulated anthocyanin synthesis be due to "wound response" by cutting of young roots, and that difference in time-course peak and PAL, CHS activities expressed by 2, 4-D and kinetin result from occurrence of isozyme which have different regulatory mechanism.mechanism.

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.273-282
• /
• 2011

This study was to investigate the effect of improve forelimb sensorimotor function and neurotrophic factor(GAP-43) expression when differing an application time of tDCS in ischemic brain injury rat model(pre, $1^{st}$, $7^{th}$, $14^{th}$). Focal ischemic brain injury was induced in 80 Sprague-Dawley rats through middle cerebral artery occlusion(MCAO) by 'Longa' method. And then experimental groups were randomly divided into four groups; GroupI: MCAO induction, GroupII: application of tDCS(10 min) after MCAO induction, GroupIII: application of tDCS(20 min) after MCAO induction, GroupIV: application of tDCS(30 min) after MCAO induction. Modified limb placing test and single pellet reaching test were performed to test forelimb sensorimotor function. And the histological examination was also observed through the immunohistochemistric response of GAP-43(growth-associated protein-43) in the cerebral cortex. In modified limb placing test, groupIII(p<0.05) showed significantly improve than the other groups on $14^{th}$). day. In single pellet reaching test, groupIII(p<0.01) and groupIV(p<0.05) significantly improved on $14^{th}$) day. And in immunohistochemistric response of GAP-43, group III showed significantly positive response than the other groups on $14^{th}$ day. These results suggest that the intensity(0.1 mA)/time(20 min) condition of tDCS application has a significant impact on the sensorimotor functional recovery in focal ischemic brain injury rat models.

• Journal of The Korean Society of Integrative Medicine
• /
• v.1 no.1
• /
• pp.1-9
• /
• 2013

Purpose : The purpose of this study is to investigate the impact on the ability to walk, balance after side walking training of hemiplegic patients caused by stroke. Method : The subjects were training before stroke onset whether more than one year elapsed 15 patients with chronic stroke patients, and Berg balance scale(BBS) and Timed up and go test(TUG), Functional reaching test(FRT), 20m walking time 200m walking time were measured and recorded. Training period, a total of three weeks, and training frequency circuit training times 10 minutes per training, 5-minute break, the 10-minute training total 25-minute training was conducted. Gait line of 3m to be based on the patient's side walking, and the risk of falling compared to the presence of the experimenter trained under was carried out. Result : 1. TUG, 2. 20m walking time, 3. 200m walking time 4. FRT, 5. All showed significant improvement in BBS. Judging from the results, the side walking training conducted three weeks due to chronic stroke hemiplegic patient's ability to balance and showed a positive effect on the improvement of walking ability. Conclusion : Accordingly, it was more effective to train hemiplegic patients with chronic stroke on side walking.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.1
• /
• pp.54-58
• /
• 2005

Objective: The purpose of this study is to determine the time evolution and distribution of cerebral apoptosis using the middle cerebral artery occlusion model in rats. Methods: A total of twenty four male rats - with 2, 3, 4, 6, 8, 12, 24 and 48 hours of middle cerebral artery occlusion respectively - were studied. The terminal deoxynucleotidyl transferase-mediated deoxyuridine triphosphate-biotin nick-end labeling(TUNEL) method was used for the observation of the apoptotic cells. The apoptotic ratio was calculated and the distribution of apoptosis was inspected in the pyriform cortex, basal ganglia and middle cerebral artery territory cortex. The rats were divided into three groups(Group I : $2{\sim}4$ hours of occlusion, Group II : $6{\sim}$12 hours of occlusion, Group III : $24{\sim}48$ hours of occlusion). Results: In this study, the proportion of apoptosis increased with the duration of middle cerebral artery occlusion and reached a maximum after about 12 hours of middle cerebral artery occlusion. The mean values of the apoptotic ratio were $30.7{\pm}11.3%$ in group I, $60.8{\pm}2.6%$ in group II and $48.7{\pm}0.7%$ in group III. The distribution of apoptosis differed in the pyriform cortex, basal ganglia and middle cerebral artery territory cortex according to the duration of time of the middle cerebral artery occlusion. Conclusion: In the middle cerebral artery occlusion model of the rats, apoptosis is found to increase according to the occlusion time, reaching a peak after 6 hours, and the distribution of apoptosis changed from the pyriform cortex to the basal ganglia and middle cerebral artery territory cortex.