• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.2
• /
• pp.77-84
• /
• 2018

In Singapore, biosafety and biosecurity measures are controlled by the Biological Agents and Toxins Act (BATA) and other requirements by regulatory agencies. The law prohibits and otherwise regulates the possession, use, import, transhipment, transfer, and transportation of biological agents, inactivated biological agents, and toxins that are of public health concern. The law also defines the facility requirements for high risk biological agents and toxins. The containment facility (BSL 3) is a minimum requirement to handle biological agents that falls under Schedule 1 (Risk Group 3). The Nanyang Technological University School of Biological Sciences Biosafety Level 3 Facility (NTU-SBS BSL 3) was designed specifically for research involving potential hazardous biological materials. The facility requires yearly re-certification by an approved facility certifier to meet the local requirements and international biosafety standards for a containment facility in many instances. On the other hand, most NTU researchers conduct biological projects involving biological agents with low or moderate risk groups (Risk Groups 1 and 2 or biological agents described in schedule 3 and 4 of BATA) and GMOs, which need only a BSL 2 laboratory. BSL 2 laboratories are yet to be legally certified or registered in Singapore. Institutional Biosafety Committee (IBC) identifies the requirements; defines a minimum standard in the safe control of biological risks and registers all BSL 2 laboratories in the NTU. Therefore, under the guidance of the IBC, the University Biosafety and Biosecurity Programme includes the audit and certification program as a unique and an internal exercise to bring NTU biosafety to a higher level.

• Journal of the Korean Institute of Gas
• /
• v.24 no.4
• /
• pp.48-55
• /
• 2020

The installation of lightning protection system has recently been increasing, but the amount of damage has still been increasing. In this study, survey (interview) and field conditions were conducted to identify the installation and safety standards of the lightning protection system. it was analyzed that the safety management system is non-existent at the stage of the design, manufacturing and construction of the site lightning protection system, and that the safety inspection of the lightning protection facility is not properly managed. It has been shown that lightning protection systems, that can solve these problems, need to be re-established according to the reality so that safety inspection can be carried out in accordance with safety standards such as management of safety certification products, operation of survey institutions, design, manufacturing, and construction of safety standards at a national level.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.29-37
• /
• 2022

MDR, a new European medical device regulation newly enacted in 2017, requires that medical device products that have received CE conformity certification through MDD be re-certified by May 2024 in line with the new CE MDR regulation. The new MDR requires more stringent medical device clinical evaluation and clinical investigation than the previous MDD required, and also require the submission of documented post-marketing surveillance data. Korean medical device makers also need to meet the new MDR requirements and obtain conformity certification, but the industry is still confused because they do not understand the new regulations thoroughly. In this study, medical device regulations in Korea, the United States, and Europe are compared, and the European MDR is further compared with the previous European Medical Device Directive MDD to help understand the requirements of the new European Medical Device Act.

• The Korean Journal of Archival Studies
• /
• no.25
• /
• pp.3-46
• /
• 2010

Digital records management is one whole system in which many social and technical elements are interacting. To maintain the trustworthiness, the repository needs periodical audit and certification. Thus, individual electronic records management agency needs toolkit that can be used to self-evaluate their trustworthiness continuously, and self-assess their atmosphere and system to recognize deficiencies. The purpose of this study is development of self-certification toolkit for repositories, which synthesized and analysed such four international standard and best practices as OAIS Reference Model(ISO 14721), TRAC, DRAMBORA, and the assessment report conducted and published by TNA/UKDA, as well as MoRe2 and current national laws and standards. As this paper describes and demonstrate the development process and the framework of this self-certification toolkit, other electronic records management agencies could follow the process and develop their own toolkit reflecting their situation, and utilize the self-assessment results in-house. As a result of this research, 12 areas for assessment were set, which include (organizational) operation management, classification system and master data management, acquisition, registration and description, storage and preservation, disposal, services, providing finding aids, system management, access control and security, monitoring/audit trail/statistics, and risk management. In each 12 area, the process map or functional charts were drawn and business functions were analyzed, and 54 'evaluation criteria', consisted of main business functional unit in each area were drawn. Under each 'evaluation criteria', 208 'specific evaluation criteria', which supposed to be implementable, measurable, and provable for self-evaluation in each area, were drawn. The audit and certification toolkit developed by this research could be used by digital repositories to conduct periodical self-assessment of the organization, which would be used to supplement any found deficiencies and be used to reflect the organizational development strategy.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.6
• /
• pp.139-150
• /
• 2019

IoT(Internet of Things) security is becoming increasingly important because IoT potentially has a variety of security threats, including limited hardware specifications and physical attacks. This paper is a study on the certification technology suitable for the lightened IoT environment, and we propose a system in which many gateways share authentication information and issue authentication tokens for mutual authentication using blockchain. The IoT node can be issued an authentication token from one gateway to continuously perform authentication with a gateway in the block-chain network using an existing issued token without performing re-authentication from another gateway participating in the block-chain network. Since we do not perform re-authentication for other devices in a blockchain network with only one authentication, we proposed multi phase authentication consisting of device authentication and message authentication in order to enhance the authentication function. By sharing the authentication information on the blockchain network, it is possible to guarantee the integrity and reliability of the authentication token.

• KIEAE Journal
• /
• v.14 no.1
• /
• pp.59-66
• /
• 2014

G-SEED aims for establishing green environmental building with energy saving and has started for evaluating with multi-residential complex in 2002 by the Ministry of Land, Infrastructure & Transport (MOLIT) and the Ministry of Environment to develop the current 10 building types and new & existing building types to be applied. Since G-SEED has been developed for more than 10 years, the strategy of globalization is needed with constant review itself and comparison between other assessments to understand current situation from the global perspectives. This study draws similarities and differences of G-SEED and LEED criteria by the comparison from re-constructed LEED criteria based on G-SEED. "Energy & Pollution" is the most concerned category in both assessments as the result of analysis on category rates. Next concerns are "Material & Resources", "Indoor Environment" and "Water Management". The unique categories in both criteria are "Ecological Environment" in G-SEED and "Innovation & Design Process" in LEED. The conclusion of this research is that two assessments are organized at different locations and with different strategies for developing green building but there are common concerns such as energy saving, material use, indoor environment. As a result, it is expected to use fundamental data for developing G-SEED for global standard.

• Journal of the Korean Society of Safety
• /
• v.28 no.3
• /
• pp.74-79
• /
• 2013

As the feature of fire, it is hard for deep-seated fire to spread to the deeper site, and it also has danger for being re-ignited cause of recontacting with oxygen after being put off. Now it is ruled in the certification criteria of wetting agent used for extinguishing deep-seated fire that the criteria for surface tension is below 33[mN/m] in Korea. For figuring out how much water for fire-fighiting can permeate into combustibles, in this research, the permeating performance is analyzed by measuring the speed of permeating and transmission quantity released after that, by pouring solution whose surface tension is changed by adjusting concentration of surfactant BDG(Butyl Di Glycol) in column From this result, it is can be determined that transmission quantity becomes less and wet area goes wider as surface tension is lower, and it is also able to be analyzed as quantity of absorbed liquid and wet area is increased because fluid permeates into the core.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.3
• /
• pp.89-97
• /
• 2014

Recently design standard for energy-saving in apartment buildings has been consolidated gradually on the basis of evaluation and certification standards of energy efficiency of buildings, the energy-saving policy of building at home and abroad. Performance criteria for thennal insulation as well as fenestration has been progressively enhanced, and performance criteria for ventilation and airtightness of the building have also been re-developed. Therefore, heating and cooling load characteristics of the apartment building can be changed. For the design of the upcoming heating and cooling equipment in apartment buildings, it is necessary to evaluate the heating and cooling load characteristics according to the design strategies for energy saving in apartment buildings. As a result, in this study, it is intended to use as a resource for analyzing the impact that the adoption of energy-saving design variables for each of the apartment buildings, to predict the heating and cooling load characteristics in the apartment building.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.233-242
• /
• 2009

This paper intend to show the affect of the intra-prediction on the typical digital watermarking method and the fact that the watermarking method has very low effectiveness when it is performed for the intra-frames of H.264. The target watermarking method was the one for imperceptibility and robustness and was assumed to be performed during the intra-compression process by the H.264 technique. Also this method was assumed to insert watermark data and to extract it for certification if needed. The problem is that the resulting data from the re-engineering of the watermark insertion process to extract the watermark data is different from the one before. We experimentally showed that it stems from the intra-prediction itself. That is, we showed that the resulting image data from only compression without watermarking changes if it is re-compressed by the same conditions as the first compression and it is because the intra-prediction modes as well as the coefficient values change. Also, we applied one blind and one semi-blind watermarking methods to show that the typical attacks after watermarking makes this problem much more serious and lowers the effectiveness of the watermarking method dramatically. Therefore we concluded by considering the experimental data that a typical watermarking method which has been researched so far cannot guarantee the effectiveness of intra-frame watermarking and it is highly required to developed a new kind of methodologies.

• The Korean Journal of Emergency Medical Services
• /
• v.22 no.1
• /
• pp.7-19
• /
• 2018

Purpose: With the purpose of educating and producing outstanding paramedics by enhancing their competencies, this study aimed to make policy suggestions to re-establish the education system and improve the national examination and the certification scheme. Methods: This study used focus group interviews and questionnaires to collect data. Totally, there were 277 subjects, including experts from the education and field. Data were collected from September 9 to 20, 2016, and analyzed using SPSS 22.0. Results: To strengthen the curriculum of paramedics, this study suggested 27 courses with 94 credits as the standardized curriculum and derived 9 core competencies of paramedics. For the national examination, this study suggested consolidating written test subjects, adding scenario questions to practical tests, and applying critical criteria to simple practical tests that performs a procedure, grading these tests on a pass/fail basis. In addition, this study suggested converting certification into license, reflecting paramedics' healthcare job characteristics. Conclusion: The quality of emergency medical services in Korea will improve when those with core competencies that originated from the standardized curriculum based on the results of this study acquire their certification through the national test scheme, and the certification management system creates a virtuous cycle to further enhance paramedics' professionalism.