• 한국군사과학기술학회지
• /
• 제13권5호
• /
• pp.725-733
• /
• 2010

A simulator is proposed in this paper for predicting the RF signal level after propagating over sea and land surfaces. Various sea and land types and transmit/receive antenna patterns, as well as the locus of the transmit antenna, are considered for this simulator. At first, microwave reflection characteristics of various sea surfaces have been computed, based on an empirical formula which is developed in this study for the relation between the sea surface roughness and wind speed. Then, microwave reflections from land surfaces such as forests, agricultural areas, and bare surfaces, are computed using the first-order vector radiative transfer theory. Finally, the signal paths over sea and land surfaces are found using the ray tracing technique and the digital elevation model, and the signal level received by a receiving antenna is computed by the using the reflection coefficients of sea and land surfaces and the signal paths.

• 한국기계가공학회지
• /
• 제18권11호
• /
• pp.18-23
• /
• 2019

The oil immersion method can be used to create objective lenses with long working distances without sacrificing the focusing resolution for laser processing. In this study, a space in which air or oil can be filled was formed in the middle of a lens for analyzing the optical properties of a liquid-oil immersion lens. As the refractive media, air and oils of different refractive index values (1.2 and 1.5, respectively) were used. A simulation was conducted in the ZEMAX software environment using the ray-tracing technique, and the performance of the oil immersion lens was verified by determining its image distortion and focal length (FL) in each medium. In the case of air, the calculated FL was 0.813 mm, whereas the imaged FLs were 1.594 mm and 8.126 mm when the refraction indices were 1.2 and 1.5, respectively. The FL of an oil immersion lens could be increased considerably. In terms of image distortion, the oil immersion lens exhibited little distortion at the center in all cases, but different degrees of image distortion were observed at different points away from the center depending on the refraction index degree.

• 한국광학회지
• /
• 제6권1호
• /
• pp.1-7
• /
• 1995

열상장비용 줌망원경계통을 설계하였다. 대물경계는 4배로부터 14배까지 배율이 변화할 수 있는 줌광학계통으로 설계하였고 접안경은 초점거리 25mm의 삼중렌즈계통으로 설계하였다. 처음에는 대물경계와 접안경을 구분하여 설계하고 후에 이를 통합하여 무초점계로 설계하였다. 1st order optics에 의해 계통을 확립하고 3rd order optics에 의해 초기설계를 얻었으며 후에 유한광선추적으로 모든 고차수차를 포함하는 ray aberration 또는 angular aberration이 최소가 되도록 최적화 하였다. 최종설계를 회절광학적 MTF를 계산하여 성능을 평가하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.1050-1055
• /
• 2001

A software for prediction of apartment noise level ihas been improved. The program is based on the ray tracing technique which has been widely used in the environmental noise analysis and prediction. Especially for prediction of environmental noise in apartment complex, this program is advanced in the graphics routine by bilinear interpolation. In this paper, we analyze the railway noise distribution in apartment environment and develop a 3D graphics routine for illustrating the noise level.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.118-124
• /
• 2016

The shape and location of the cutoff shield in a projection-type headlight system were optimized by a ray-tracing technique. A shield based on a Petsval surface showed better cutoff characteristics than a flat or cylindrical shield, such as a sharp intensity gradient and less color separation at the cutoff line. Adjustment of the shield’s location between the reflector and the aspheric lens further improved its cutoff characteristics.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.521-528
• /
• 2000

NIC＠E is software for prediction of various outdoor Noise. The program is based on the ray tracing technique which has been widely used in an environmental noise prediction and analysis. In this paper, we analyze the Railway noise on the various types of geometrical source conditions in 3D and develope tile expression method of 3D Graphics for noise level.

• Journal of the Optical Society of Korea
• /
• 제11권3호
• /
• pp.118-123
• /
• 2007

The emitting structure of multi-channel-type flat fluorescent lamps (FFLs) combined by a lenticular-lens-patterned diffuser plate was optimized by the ray tracing technique. The optimal parameters such as the distance between the channels of the FFL and the distance between the FFL and the diffuser plate were suggested from the viewpoint of the luminance uniformity. The best luminance uniformity, which was higher than 90%, was obtained at the channel distance of 4 mm and the distance of 12.5 mm between the FFL and the patterned diffuser plate.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.1115-1118
• /
• 2000

In order to understand information of geographic information systems(GIS) exactly and easily, visualization technique becomes important. In this paper, we consider car-traffic which is one of the information accompanying with a map. Then, a visual simulation method is proposed for car-traffic flow at crossing with the cell-automaton and the ray tracing method. We simulate the various situations and discuss about changes of traffic.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.279-285
• /
• 1997

In this paper, the validity for the application of the diffuse sound field theory to the real sound filed, especially on the bounding surfaces of the rooms, was studied. Numerical simulations using ray tracing technique for two models, namely spheres and a reverberant room, were performed. Calculation results show that the distribution of the incident sound energy vs incident angles is approximated to Gaussian distribution, not to the uniform distribution.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.503-510
• /
• 1999

NIC@E is the software for prediction of various outdoor Noise. The Program is based on the ray tracing technique which has been widely used in an environmental noise prediction and analysis. In this paper, we analyze the Railway noise on the various types of geometrical source conditions in 3D and develope the expression method of 3D Graphics for noise level.