• 한국표면공학회지
• /
• 제47권4호
• /
• pp.204-209
• /
• 2014

The electrodeposition of ZnO nanorods was performed on ITO glass. The optimization of two process parameters (solution temperature and growth time) has been studied in order to control the orientation, morphology, density, and growth rate of ZnO nanorods. The structural and optical properties of ZnO nanorods were systematically investigated by using field-emission scanning electron microscopy, X-ray diffractometer, and photoluminescence. Commonly, the results of the structural property show that hexagonal ZnO nanorods with wurtzite crystal structures have a c-axis orientation, and higher intensity for the ZnO (002) diffraction peaks. Furthermore, the nanorods length increased with increasing both the solution temperature and the growth time. The results of the optical property show a strong UV (3.28 eV) peaks and a weak visible (1.9~2.4 eV) bands, the intensity of UV peaks was increased with increasing both the solution temperature and the growth time. Especially, the UV peak for growth of nanorods at $75^{\circ}C$ blue-shift than different temperatures.

• 한국표면공학회지
• /
• 제47권4호
• /
• pp.198-203
• /
• 2014

ZnO nanorods have been deposited on ITO glass by electrodeposition method. The optimization of two process parameters (precursor concentration and current) has been studied in order to control the orientation, morphology, and optical property of the ZnO nanorods. The structural and optical properties of ZnO nanorods were systematically investigated by using field-emission scanning electron microscopy, X-ray diffractometer, and photoluminescence. Commonly, the results show that ZnO nanorods with a hexagonal form and wurtzite crystal structure have a c-axis orientation and higher intensity for the ZnO (002) diffraction peaks. Both high precursor concentration and high electrodeposition current cause the increase in nanorods diameter and coverage ratio. ZnO nanorods show a strong UV (3.28 eV) and a weak visible (1.9 ~ 2.4 eV) bands.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.392-392
• /
• 2011

Carbon nanotubes (CNT) emitter has widely become an attractive mechanism that draws growing interests for cold cathode field emission.$^{1,2}$ CNT yarns have demonstrated its potential as excellent field emitters.$^3$ Extensive simulations were carried out in designing a CNT yarn-based cathode assembly. The focal spot size dependence on the anode surface of the geometric parameters such as axial distance of the electrostatic focus lens from the cathode and the applied bias voltages at the cathode, grid mesh and electrostatic focus lens were studied. The detailed computer simulations using Opera 3D electromagnetic software$^4$ had revealed that a remarkable size of focal spot under a focusing lens triode type set-up design was achieved. The result of this optimization simulation would then be applied for the construction of the CNT yarn based micro-focus x-ray tube with its field emission characteristics evaluated.

• 전자공학회논문지
• /
• 제51권12호
• /
• pp.174-179
• /
• 2014

본 연구는 방사선(학)과 실습교육에서 발생하는 방사선량을 측정하고, 교육과정과 실습운영방법에 따른 재학생의 피폭선량을 추정하여 이를 고려한 안전한 교육과정과 실습운영방법을 제안 하였다. 3년제와 4년제의 교육과정을 수집하여, 실습교육을 포함하는 교과목을 선정 후 방사선량을 측정하여 교육과정의 구성, 실습인원편성, 실습방법의 세 가지 변수에 적용하여 차이를 관찰하였다. 방사선량을 고려한 실습방법은 재학생의 피폭선량을 평준화 시켜주며, 실습인원이 증가할수록 개인피폭선량은 감소하였다. 방사선(학)과 실습교육에서 발생하는 재학생 방사선 피폭은 실습운영방법의 최적화를 통해 크게 감소하였으며, 본 연구에서 제시한 교육과정을 반영한 실습교육이 이루어진다면, 재학생의 피폭선량 측면에서 안전하고 효과적인 실습교육에 큰 도움이 될 것이다.

• 한국재료학회지
• /
• 제9권6호
• /
• pp.599-603
• /
• 1999

AIN과 저온 GaN 완충충율 이용하여 Si 기판 위의 후막 GaN의 성장특성을 조샤하였다. Si과 GaN의 격자부정합도와 열팽창계수의 차이를 줄이기 위해 AIN과 저온 GaN를 완충충으로 사용하였다. AIN은 RF sputter를 이용하여 중착온도와 증착시간 및 RF power에 따른 표면 거칠기를 AFM으로 조사하여 최척조건을 확립하여 사용하였다. 또한 저온에서 GaN를 성장시켜 이를 완충충으로 이용하여 후막 GaN의 성장시 미치는 영향을 살펴보았다. 성장온도와 V/III 비율이 후막 성장시 표면특성과 결정성 및 성장속도에 미치는 영향을 조사하였다. 후막 GaN의 표연특성 및 막의 두께는 SEM과 $\alpha-step$을 이용하여 측정하였으며 결정성은 X-ray Diffractometer를 이용하여 조사하였다.

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.4158-4165
• /
• 2021

In this study, tissue equivalency (TE) of a newly developed epoxy-based phantom to 3-5 years child's tissue was investigated in paediatric energy range. Epoxy-based TE-phantoms were produced at different glandular/adipose (G/A) ratios of 17/83%, 31/69%, 36/64% and 10/90%. A procedure was developed in which specific amounts of boron, calcium, magnesium, sulphur compounds are mixed with epoxy resin, together with other minor substitutes. In paediatric energy range of 40-60 kV_p half-value layer (HVL) values were measured and then Hounsfield Units (HU) were determined from Computed Tomography(CT) scans taken in the X-ray energy range of 80-120kV_p. It is found that radiation absorption properties of these phantoms in terms of the measured HVL values related to linear attenuation coefficients (µ) are very well mimicking a 3 years child's soft tissue in case a ratio of 10/90%G/A. Additionally, the HU values of phantoms were determined from the CT scans. The HU = 47.8 ± 4.8 value was found for the epoxy-based phantom produced at a ratio of 10/90%G/A. The obtained HVL and HU values also support the suitability of the new epoxy based-phantom produced at a ratio of 10/90%G/A for a satisfactory mimicking a 3 years child's soft tissue by 5%. Thus they can have a potential use to perform the quality controls of medical X-ray systems and dose optimization studies.

• 한국환경과학회지
• /
• 제28권1호
• /
• pp.65-73
• /
• 2019

The catalytic activity of Ni-0.2%YSZ (Yttria-Stabilized Zirconia) with different promoters was evaluated for $CO_2$ methanation. The catalysts were weighed for mixing and they were dried at $110^{\circ}C$ for molding into disks. The concentration of $CO_2$ and $CH_4$ for conducting of $CO_2$ methanation were analyzed by gas chromatography and the physical characteristics of the disk-type catalyst formed were analyzed by X-ray diffraction, scanning electron microscope and energy dispersive x-ray spectrometer. The addition of $CeO_2$ as a promoter for Ni-0.2%YSZ (denoted as Ni-5%Ce-0.2%YSZ) resulted in the highest $CO_2$ methanation. It also showed catalytic activity at a low temperature($200^{\circ}C$). Following this, $ZrO_2$, $SiO_2$, $Al_2O_3$ and $TiO_2$ were added to Ni-5%Ce-0.2%YSZ to compare the $CO_2$ methanation, and the highest efficiency was found for. Ni-1%Ti-5%Ce-0.2%YSZ Then, the concentration of Ti was increased to 10% and the catalytic activity was estimated using seven different types of commercial $TiO_2$. In conclusion, ST-01 $TiO_2$ showed the highest efficiency for $CO_2$ methanation.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2253-2261
• /
• 2022

In this study, nano-scaled shielding materials were assembled and fabricated by doping different weight percentages of Nano-mercuric oxide (N-HgO) into Nano-Bentonite (N-Bent) based on using (100-x% N-Bent + x% N-HgO, x = 10, 20, 30, and 40 wt %). The fabricated N-HgO/N-Bent nanocomposites were characterized by FT-IR, XRD, and SEM and evaluated to evaluate their shielding properties toward gamma radiation by using four different γ-ray energies form three point sources; 356 keV from ¹³³Ba, 662 keV from ¹³⁷Cs as well as 1173, and 1332 keV from ⁶⁰Co. The γ-rays mass attenuation coefficients were plotted as a function of the doped N-HgO concentrations into N-HgO/N-Bent nanocomposites. The computed values of mass attenuation coefficients (µ_m), effective atomic number (Z_eff) and electron density (N_el) by the as-prepared samples were found to increase, while the half value layer (HVL) and mean free path (MFP) were identified to decrease upon increasing the N-HgO contents. It was concluded also that the increase in N-HgO concentration led to a direct increase in the mass attenuation coefficient from 0.10 to 0.17 cm²/g at 356 keV and from 0.08 to 0.09 cm²/g at 662 keV. However, a slight increase was observed in the identified mass attenuation coefficients at (1172 and 1332 keV).

• 한국방사선학회논문지
• /
• 제16권5호
• /
• pp.519-526
• /
• 2022

능동형 전자식 개인피폭선량는 개인의 피폭 선량을 실시간으로 확인할 수 있는 장점을 가진 보조선량계이다. 하지만 국내에 사용되고 있는 다수의 능동형 개인피폭 선량계는 의료기관에서 사용하는 진단방사선 영역에서 큰 오차와 낮은 응답성을 가진다. 이에 본 연구에서는 Si 포토다이오드 검출기를 사용하는 능동형 전자식 개인선량계에서 저에너지 영역의 응답특성을 향상시키기 위한 에너지 보상 두께를 평가하였다. 40 kVp에서 80 kVp 영역에서는 Al 0.2 mm + Sn 1.0 mm 필터에서 우수한 응답특성을 보였고 80 kVp에서 120 kVp 영역에서는 Al 0.2 mm + Sn 1.6 mm 필터에서 우수한 응답특성을 보였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권1호
• /
• pp.30-36
• /
• 2023

이 연구에서는 콘크리트 표면 이미지를 활용하여 표면공극률을 평가할 수 있는 영상 분할모델을 도출하였다. 물-시멘트비가 다른 3종류의 콘크리트 실험체 (w/c = 54, 35, 및 30%) 가 제작되었으며, 광학현미경을 활용하여 2,729장의 표면 이미지를 취득하였다. 공극이 마스킹 된 표면 이미지 를 활용하여 벤치마킹 테스트, 매개변수 최적화, 최종모델 도출이 실시되었으며, 97%의 검증정확도를 나타내는 영상 분할 모델을 도출할 수 있었다. 영상 분할모델 및 X-Ray Microscope (XRM)을 통해 얻은 공극률을 비교하여 모델을 검증하였으며, 물시멘트비가 높은 시편에 대해선 모델과 XRM이 평가한 공극률이 유사하였고, 물시멘트비가 낮은 시편에 대해서는 모델이 XRM보다 공극률을 낮게 평가하는 경향을 나타내었다.