• 한국토양비료학회지
• /
• 제27권1호
• /
• pp.10-14
• /
• 1994

지효성 K비료는 KOH, KCl 등 속효성 K원료와 Fly ash중 난용성 K를 이용하였고 소성시 보조제로서 부연탄가루, $Mg(OH)_2$, $K_2CO_3$와 Borax를 혼합하여 제조하였다. 목표 K함량에 맞게 원료와 보조제 혼합비율이 결정되었으며 무연탄가루와 $Mg(OH)_2$의 적정 배합비율은 각각 12%, 3%이었으며 소성온도는 $850^{\circ}C$, 소성시간은 30분이 적정선으로 판명되었다. 시제품은 소성온도가 낮고 소성시간이 짧은 경우 시제품의 특성에 부적합하였다. 제조된 시제품의 K성분은 지효화되어 목표치에 부합되었다.

• 한국세라믹학회지
• /
• 제15권3호
• /
• pp.149-156
• /
• 1978

The utilization of waste and industrial byproduct materials, such as blast furnace slag, shales, poor coal and anthracite briquet ash, were investigated as a source of calcareous or argillaceous material in the manufacture of Portland cement. As a slag is similar to cement in chemical compoment and contains about 40∼50% of CaO, it's utilization in cement manufacture should be suitable. The burnability was increased and the heat of clinker formation was decreased by using slag. Some consideration should betaken in the use of large quantity because of sticking in suspension preheater kiln. Suitable quantities of colliery shales and poor coal should be useable in cement manufacture as a argillaceous materials and also its combustible materials should be utilized in cement manufacture. Anthracite briquet ash is also usable as a argillaceous source and it gives good burnability.

• 한국환경과학회지
• /
• 제1권2호
• /
• pp.167-175
• /
• 1992

This study was conducted for an efficient utilization of waste fly ash obtained from the power plant. Fly ash was used for synthesizing zeolite. Na-Pl zeolite could be easily synthesized from waste fly ash and showed the potential to remove heavy metal ions. The synthetic zeolite showed good adsorption property for heavy metal much better than raw fly ash and natural zeolites. Na-Pl exhibited the high adsorption efficiency with a maximum value of 260 Pb mg/g and strong affinity for Pb2+ ion. The metal ion selectivity of Na-Pl was determined in a decreasing order : $Pb^{2+}$>$Cd^{2+}$>$Cu^{2+}$+>$Zn^{2+}$>$Fe^{3+}$

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제1권2호
• /
• pp.167-175
• /
• 1997

This study was conducted for an efficient utilization of waste fly ash obtained from the power plant. Fly ash was used for synthesizing zeolite. Na-P1 zeolite could be easily synthesized from waste fly ash and showed the potential to remove heavy metal ions. The synthetic zeolite showed good adsorption property for heavy metal much better than raw fly ash and natural zeolites. Na-P1 exhibited the high adsorption efficiency with a maximum value of 260 Pb mg/g and strong affinity for $Pb^{2+}$ ion. The metal ion selectivity of Na-P1 was determined in a decreasing order : $Pb^{2+}>Cd^{2+}>Cu^{2+}>Zn^{2+}>Fe^{3+}$.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.321-324
• /
• 2004

The discharge of fly ash that is produced by coal-fired electric power plants is rapidly increasing in Korea. The utilization of fly ash in the raw materials would contribute to the elimination of an environmental problem and to the development of new high-performance materials. So it is needed to study the binder obtained by chemically activation of pozzolanic materials by means of a substitute for the exiting cement. This paper concentrated on the strength development according to the kind of chemical activators, the curing temperature, the heat curing time. Also Scanning electron microscopy and X-Ray diffraction analysis show what the reaction products of the alkali activated fly ash are.

• 한국결정성장학회지
• /
• 제20권1호
• /
• pp.43-52
• /
• 2010

삼척 도계지역의 탄광에서 석탄채취시에 발생되는 석탄폐석을 이용하여 유리를 제조하였다. 소다라임계 화학조성을 갖는 유리를 제조하기 위하여 화학원료로서 소다회, 탄산칼슘 등의 원료를 추가로 사용하였고, 화학원료인 탄산칼슘 대신에 천연광물원료인 석회석을 사용하였을 때의 특성을 검토하였다. 전기로를 사용하여 $1,550^{\circ}C$에서 1시간 용응하여 투명한 유리를 제조할 수 있었다. 석탄폐석의 종류 및 파유리의 종류에 따라 다양한 종류의 유리샘플이 제조되었다. 유리샘플의 투과율 및 색차와 같은 광학적 특성을 UV/VIS/NIR Spectrometer를 이용하여 측정하였고, 또한 열팽창계수 및 연화점과 같은 열적특성도 측정하였다. 그 결과, 일반 선탄경석으로는 70% 이상의 가시광선투과율을 갖는 투명한 유리를 제조할 수 있었으며, 또한 쉘(shell) 타입의 선탄경석으로는 0~35%의 가시광선 투과율을 갖는 검정색의 칼라유리를 제조할 수 있었다. 따라서 석탄폐석을 이용하여 건축재료로서 유리타일이나 발포유리와 같은 유리 2차제품을 제조하는데 활용할 수 있으리라 판단되었다.

• 한국연소학회지
• /
• 제19권3호
• /
• pp.18-25
• /
• 2014

Bottom ash from a coal-fired power plant is usually landfilled to a nearby site, which causes a growing environmental concern and increased operating costs. One way of recycling the bottom ash is to produce light-weight aggregate (LWA) using a rotary kiln. This study investigated the temperature profiles of raw LWA particles in a rotary kiln to identify the range of operating conditions appropriate for ideal bloating. For this purpose, a new simulation method was developed to integrate a 1-dimensional model for the bed of LWA particles and the computational fluid dynamics (CFD) for the fuel combustion and gas flow. The temperature of LWA particles was found very sensitive to the changes in the air preheating temperature and excess air ratio. Therefore, an accurate control of the operation parameters was essential to achieve the bloating of LWA particles without excessive sintering or melting.

• 한국세라믹학회지
• /
• 제52권2호
• /
• pp.159-164
• /
• 2015

We manufacture artificial lightweight aggregates (ALWAs) using bottom-ash as the primary raw material. We coat the ALWA surfaces with low-melting point materials in order to enable them to bloat, which is essential to reduce the bulk density of the aggregate. Then, we sinter the prepared aggregates at 1000, 1100, and $1200^{\circ}C$ using either the direct or two-step firing schedules. Finally, we evaluate the properties of the fired samples through analyzing their bulk density, water absorption, and microstructure. The surface-modified samples result in a reduction of their bulk density by $0.3{\sim}0.4g/cm^3$ regardless of the firing method used. Based on these results, we conclude that this approach could provide a viable method for the mass-production of ALWAs from industrial waste such as bottom-ash.

• 한국지반신소재학회논문집
• /
• 제21권4호
• /
• pp.111-121
• /
• 2022

베트남에서 대량 발생하는 플라이애시는 누적 매립량이 약 1억톤에 이르고, 약 1억톤 정도이며, 고로슬래그 역시 약 585만톤 정도 발생하는 것으로 보고되고 있다. 이에 따라 최근 베트남에서도 플라이애시 및 고로슬래그를 재활용하기 위해 제도적으로 대응하고 있으나 아직 활발히 현장에 적용되지 못하고 있다. 이에 본 연구에서는 베트남 발생 플라이애시 5종에 대하여 기본 성능분석을 실시하였고, 베트남 발생 고로슬래그와 국내 발생 고로슬래그의 성능을 비교 평가하였다. 플라이애시와 고로슬래 그를 활용하여 지반안정재 압축강도시험, 지반혼합 고화토 일축압축강도 시험을 수행한 결과, 베트남 발생 플라이애시 및 고로슬래그를 지반안정재의 원료로 활용이 가능한 것을 확인하였다.

• 한국수소및신에너지학회논문집
• /
• 제29권1호
• /
• pp.81-89
• /
• 2018

Fuel blend technique is one of the most effective way of using biomass to replace the coal. Many studies on combustion characteristics with coal and biomass blends have been conducted. In this study, char reactivity and emission characteristics of coal (Suek) and biomass (EFB) blends has been investigated by TGA and DTF to evaluate the applicability of the pre-treated (torrefaction, ash removal technology) EFB to pulverized coal boiler. In all blending cases, char reactivity improved as the blending ratio increases (10, 20, and 30%), especially torrefied EFB blended at 30%. Also, unburned carbon decreased as the blending ratio increases in all types of EFB. NOx emission showed the increase and decrease characteristics according to the content of fuel-N of raw EFB and torrefied EFB. But the amount of NOx emission at ashless EFB blends is greater than that of Suek despite of lower fuel-N. It indicated that co-firing effect of using the pretreatment biomass fuel is relatively better than those of the untreated biomass fuel about char reactivity and emission characteristics.