• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 봄 학술발표회 논문집
• /
• pp.50-52
• /
• 1990

Although concrete pavements were successfully widespread throughout the nation due to the desirable surface characteristics, durability, and economy, it still causes several transverse cracking and joint failure problems in some areas. In this paper, the major emphasis was given to provide a rational analytical approach on joint failure mechanisms, considering several sets of joint stiffnesses on different subgrade moduli. Besides , load transfer mechanisms on concrete pavement joints were highlighted with finite element method and computer modeling.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.197-200
• /
• 2006

The ingress of chloride ions plays a crucial role for service life design of reinforced concrete structures. In view of durability design of concrete structures under marine environment, one of the most essential parameters is the surface chloride content of concrete. However, on the basis of the results of in-situ investigation, this value has been determining in the numerous studies on the durability design of concrete structures. Hence, it is necessary to confirm the range of the surface chloride content in order to establish a unified durability design system of concrete. This study suggests a rational and practical way to calculate the maximum surface chloride content of submerged concrete under marine environment. This approach starts with the calculation of the amount of chloride ingredients in normal sea water. The capillary pore structure is modeled by numerical simulation model HYMOSTRUC and it is assumed to be completely saturated by the salt ingredients of sea water. In order to validate this approach, the total chloride content of the mortar and concrete slim disc specimen was measured after the immersion into the artificial sea water solution. Additionally, the theoretical, the experimental and in-situ investigation results of other researchers are compiled and analyzed. Based on this approach, it will follow to calculate the maximum surface chloride content of concrete at tidal zone, where the environment can be considered as a condition of dry-wetting cycles.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제33권10호
• /
• pp.868-876
• /
• 2006

2차원 평면 입력을 통한 모델링에서는 입력 값을 3차원 데이타로 바꾸기 위한 기능과 메뉴들이 필요하지만 가상공간 디자인을 위한 3차원 입력 시스템은 입력 값을 곧바로 3차원 데이타로 변환될 수 있다. 하지만 3차원 입력시스템에서 효율적인 곡면 모델링 방법, 특히 곡면 변형 방법은 제안되지 않고 있다. 본 논문에서는 기존의 변형방법이 3차원 입력시스템에서 적용되었을 때 발생할 수 있는 문제점을 제시한다. 그리고 디자이너가 접근하기 쉬운 목표곡선을 이용한 변형을 제안한다. 이와 같은 3차원 목표곡선을 이용한 변형을 통해 디자이너가 보다 쉽게 3차원 입력시스템에 접근하여 가상공간 스케칭 및 디자인을 구현할 수 있다.

• 한국환경과학회지
• /
• 제24권4호
• /
• pp.403-414
• /
• 2015

This study is daytime and nighttime runoff image data caused by heavy rain on May 27, 2013 at Oedo Water Treatment Plant of Oedo-Stream, Jeju to compute runoff by applying Surface image velocimeter (SIV) and analyzing correlation according to current. At the same time, current was comparatively analyzed using ADCP observation data and fixed electromagnetic surface current meter (Kalesto) observed at the runoff site. As a result of comparison on resolutions of daytime and nighttime runoff images collected, correlation coefficient corresponding to the range of 0.6~0.7 was 6.8% higher for nighttime runoff image compared to daytime runoff image. On the contrary, correlation coefficient corresponding to the range of 0.9~1.0 was 17% lower. This result implies that nighttime runoff image has lower image quality than daytime runoff image. In the process of computing current using SIV, a rational filtering process for correlation coefficient is needed according to images obtained.

• 소성∙가공
• /
• 제30권3호
• /
• pp.125-133
• /
• 2021

In this study, response surface method (RSM), back propagation neural network (BPNN), and genetic algorithm (GA) were used for modeling and multi-objective optimization of the parameters of AA5052-H32 in incremental sheet forming (ISF). The goal of optimization is to determine the maximum forming angle and minimum surface roughness, while varying the production process parameters, such as tool diameter, tool spindle speed, step depth, and tool feed rate. A Box-Behnken experimental design (BBD) was used to develop an RSM model and BPNN model to model the variations in the forming angle and surface roughness based on variations in process parameters. Subsequently, the RSM model was used as the fitness function for multi-objective optimization of the ISF process the GA. The results showed that RSM and BPNN can be effectively used to control the forming angle and surface roughness. The optimized Pareto front produced by the GA can be utilized as a rational design guide for practical applications of AA5052 in the ISF process

• Spatial Information Research
• /
• 제23권3호
• /
• pp.79-89
• /
• 2015

건축물이 일정규모 이상 높아지면 구조설계 시 바람의 영향이 중요한 요인으로 작용하게 된다. 우리나라는 지형적인 특성상 태풍과 같은 위험현상이 자주 발생하는 지역이므로 더욱 중요한 요인이라 할 수 있다. 이러한 시대적 흐름과 기상변화를 고려한다면 건축물의 합리적인 내풍설계의 필요성이 더욱 부각되고 있다. 본 연구에서는 1:5,000 수치지형도를 바탕으로 공간정보분석을 이용하여 설계풍하중 산정방법을 제시하였으며 실제 적용사례와 비교분석 하였다. 제안된 방법으로 풍속고도분포계수, 지형계수를 산정할 경우 보다 정량적, 객관적으로 설계풍속을 산정할 수 있었으며 기존의 방법과 비교했을 때 평가에 필요한 시간과 비용을 단축할 수 있을 것으로 기대되 건축물의 합리적이고 경제적인 내풍설계에 도움이 될 것으로 기대된다.

• 한국전산유체공학회지
• /
• 제16권2호
• /
• pp.1-10
• /
• 2011

A new computational program, which is based on the CIP/CCUP(Constraint Interpolation Profile/CIP Combined Unified Procedure) method, has been developed to numerically analyse sloshing phenomena dealt as multiphase-flow problems. For the convection terms of Navier-Stokes equations, the RCIP(Rational function CIP) method was adopted and the THINC-WLIC(Tangent of Hyperbola for Interface Capturing-Weighted Line Interface Calculation) method was used to capture the air/water interface. To validate the present numerical method, two-dimensional dam-breaking and sloshing problems in a rectangular tank were solved by the developed method in a stationary Cartesian grid system. In the case of sloshing problems, simulations by using a improved MPS(Moving Particle Simulation) method, which is named as PNU-MPS(Pusan National University-MPS), were also carried out. The computational results are compared with those of experiments and most of the comparisons are reasonably good.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.228-232
• /
• 2003

Lovastatin produced by Aspergillus terreus via polyketide pathway is a secondary metabolite with high anti-hypercholesterolemic activity. In this paper we are going to present effective strain development strategies for lovastatin production by comparing the productivity of the mutants obtained through traditional rational screening process and protoplast fusion method. Mutants resistant against various antibiotics and/or antimetabolites showed significantly higher lovastatin productivity than the corresponding mother strains, demonstrating that rational screening method was very efficient in selecting high yielding producers. Recombinant fusants obtained using protoplast fusion between high producers were observed to have very different morphology and physiology as represented by the production and secretion of lovastatin, as well as cell growth pattern. In parallel with the strain development, optimization process for the production medium was carried out in order to find optimal concentrations of the medium components using such a powerful statistical method as response surface method (RSM). It was concluded that not only the optimum production medium but also good morphological characteristics of the high-yielding producers led to higher lovastatin production.

• 대한토목학회논문집
• /
• 제32권1D호
• /
• pp.89-94
• /
• 2012

범용센서모델의 한 종류인 비례다항식 모델(RFM: Rational Function Model)은 광학영상의 센서모델링분야에서 활발히 활용되고 있으나 SAR영상에 대한 적용은 미진한 실정이다. 본 연구에서는 스테레오 TerraSAR-X영상을 대상으로 RF 모델링을 적용하여 적용방법의 타당성과 효율성에 대해 분석하였다. 또한 본 연구성과의 DSM(Digital Surface Model)과 기존 상용 소프트웨어에서 생성된 DSM을 다양한 측면에서 비교 분석하였다. 그 결과 RF 모델링 기법이 SAR영상의 적용 시에도 매우 효과적이며 실용적으로 적용 가능함을 알 수 있었다.

• 한국해양공학회지
• /
• 제29권4호
• /
• pp.309-316
• /
• 2015

Lifting lugs are frequently used in shipyards to transport and turn over the blocks of ships and offshore structures. With the development of shipbuilding technology, blocks have increased in size, and block management technology has assumed a more important role in shipbuilding to enhance the productivity. For the sake of economics, as well as the safe design of a lug structure, a more rational design procedure based on a rigorous structural analysis is needed. This study investigated the strength characteristics of T-type lugs, considering the influence of blocks on which lugs are attached, by varying the in-plane and out-of-plane load direction. In this paper, the ultimate strength is also addressed for cases that include or do not include blocks in the strength analysis. In the present results, when there was a load acting in the normal direction to the block surface, the strength characteristics became poor, and the ultimate strength decreased. This paper ends by describing the need for further study to develop a more rational design for a lug structure.