• Journal of the Korean Geosynthetics Society
• /
• v.15 no.3
• /
• pp.27-37
• /
• 2016

Although many studies on the Granular Compaction Pile (GCP) have been done by many researchers, the GCP design has not been systematically done due to the absence of the rational design methodology. As the GCP design has been mostly done by engineers' own experiences, some failure cases have been reported to occur. For this reason, it is very difficult to confirm definite causes of the failure and establish the prevention plans for the failure. Therefore, this study aims to investigate the optimal mixing ratio of gravel and sand, the effects of the internal friction angle of the GCP on the stress concentration ratio and the vertical and horizontal settlements. In order to analyze the behavior of the soft ground reinforced with the GCP depending on the different design parameters such as the stress concentration ratio and the internal friction angle, a number of finite element (FE) analyses were performed. From the direct shear test, the optimal mixing ratio of gravel to sand was found to be 70:30. Based on the numerical analyses, as the internal friction angle increased, the stress concentration ratio increased and it converged to a constant value. In addition, the larger the internal friction angle, the smaller the settlements. Consequently, the use of the optimal mixing ratio of gravel and sand can lead to reducing both the lateral flow and the heaving phenomenon.

• Korean journal of communication and information
• /
• v.17
• /
• pp.61-84
• /
• 2001

Discussions and debates over media education abound in Korra as the number of both institutions that provide media related education and students enrollment for these programs increases rapidly in recent years. In spite of this rather impressive expansion, however, many have raised serious questions about media education of Korea for its not being able to meet the need of the Industry and students, and, moreover, inability to face the challenges brought by new communication related technologies. Who teaches What for what purposes are some of the fundamental questions underlying these heated debates and discussions. To understand these rather complex and interrelated issues more clearly, it is attempted to delineate the nature of these debates by exploring the evolutionary process of media education. The issues related to debates over purposes of media education, curriculum, and faculty qualification have changed through the history of media education, but the nature of the debates, that is the struggle between professionalism and academism, or the tension between practice and theory, has not. Upon this understanding, some argue that what distinguishes opposing sets of dichotomies, such as skills vs. knowledge, training vs. education, now-how vs. know-why. professional vs. academic, practice vs. theory, is more a reflection of social class division and group interests which have privileged theory over practice than a rational scholastic distinction. In addition, it has been often pointed out that the media studies have failed to establish ties with specific industries, and furthermore academic studies seriously lack solid theoretical and practical bases. In the case of the United States, leaders of the industry had contributed much for the Initiation of journalism education in a college setting. However, once inaugurated,, the process of its evolution has depended heavily on academicians. In a country like Korea, where academic and theoretical orientation is much stronger, these problems of media studies and education are even more acute. In this study, it is suggested that academicians and educators be more open-hearted to the realities of changing world, practices of the industries, and recruitment of professionals and practitioners to fill the gap between practice and theory, for the sake of the future of media studies and education.

• Culinary science and hospitality research
• /
• v.18 no.1
• /
• pp.213-227
• /
• 2012

This study aims to discover an effect of conflicts between work-family family-work of hotel employees on their emotional exhaustion through an empirical analysis, and to propose relevant implications. Also, the study tried to identify which role a responsive strategy may play as a moderating variable from among such influential factors. In consideration of the sales and the number of rooms at hotels as of 2010, the study conducted survey research about seven hotels located in Seoul, and carried out research with 298 copies of effective samples. In order to confirm the effect of work-family family-work on emotional exhaustion, the study undertook a multiple regression analysis and performed a moderated regression analysis for confirming the moderation effect of a responsive strategy. As a result, only the conflicts between one's work and a family had a significant effect on emotional exhaustion, and a problem-oriented responsive strategy demonstrated a moderation effect of the conflicts between work-family family-work and emotional exhaustion. In this regard, hotels should be prepared with a system which enables hotel chefs to be more faithful to both their families and household affairs through the reasonable operation of workload or an instructive system at work, and it would be possible to deal with the symptom of emotional exhaustion by conflict management through a rational analysis of the cause of conflict, if any, as well as through an alternative to such a conflict.

• Journal of Families and Better Life
• /
• v.5 no.2
• /
• pp.127-144
• /
• 1987

The purpose of this study is to explore the family communication and power. Communication is a symbolic, transactional process in functional view . To say tat communication is a process implies a continuous interaction of an indefinite large number of variables with a concomitant, continuous change in the values taken by these variables. Finally the process implies change. Family functions include the primary functions of cohesion and adaptability and supporting functions of family images, themes, boundaries, and biosocial issues, The primary functions reveal concepts integrated family interaction and supporting functions, along with those of cohesion and adaptability, give shape of family life. The message system is the major element of communication process and influences both the form and the content of thier relationship and create and share meanings. The family-of-origin issues influence all aspects of family communication and account for many of the communication patterns, rules and networks. Power does not belong to an individual. rather it is a property of a relationship between two or more persons, Power, a system property is the ability of an individual to change the behavior of other members in a social system. Power operate transactionally in a family and any power maneuvers within it have a system wide effect. In order to study power in families , it is necessary to examine 1) family power operations 2) development of family power and 3) the communication of power strutegies. The research presented indicated that a rigid power structure, characterized by dominance and little sharing, restricts family flexibility reduce cohesion, and adversely affects satisfaction in families. power constantly changes as a family grows and develops within its system. Although power changes may be more obvious in children as they mature and more from a independent stated to an independent one, each of the parents experience egual or greater. Communication and activities take place that either enhance positively or negatively the images, themes, and degree of unity of cohesion the family desires. Power operated within a dynamic, growing, changing, interdependent transactional family system. Power struggle may develop when as issue becomes important to one or more family member. When this happens, and the rational exploration of alternatives ceases, various one-up power maneuvers usally follows, This affect family intimacy. a vital element in meaningful relationships . To resolve differences and not become the victim of another's power , one need to engage in constructive conflict since the ability to clearly and comfortably repudiate another is part of the achievement of intimacy.

• Health Policy and Management
• /
• v.10 no.2
• /
• pp.41-77
• /
• 2000

This study aimed at the analysis, from the perspective of rationality, of policy making process in the separation of prescribing and dispensing. This study is to identify the characteristics and problems of the policy process to introduce the new durg-prescription system, and make policy recommendations. In terms of separation of prescribing and dispensing, the development of policy making process can be divided into two periods; periods before and after the inauguration of the govemment of people. In the period before the govermment of poeple, one of the major characteristics of policy decision on the new system was the poweful influence of interset groups. At that time, the ministry lacked the problem-solving ability and commitment on the policy. Consequently, during the former period, the policy making process had been driven by interest groups. Therefore, the original purpose of the policy to secure the pulic health was lost. During the latter period, there was also the strong influence of interst groups, complexity of interest, the ministry's inability of problem solving. However, in this period, it is notable that this has drawn nation-wide attention, severl civic grouos have participated in the policy making process, and that the number and voice of these groups have remarkably increased. With regards to rationality, incrementalish model is highly sutable to explain the policy making process in the former period. But in the latter period when the new drugperscripition system became a national issue and civic groups began to participte in this matter more actively, rational model is more explanatory that incrementalism to understand the process. During the latter period, the original goal of this policy was not distored by a few interest groups thanks to the rapid development of civil movement and therebly a big influence of civic groups on the policy making. For that reson, a jigh level of rationality is found in the policy-making process of the latter period. Some suggestions to achieve the rationality in the policy making process based on the results of this study are as follows; Frist, the public's participation should be enered in the policy making process. Second, the govermment should make contiuns efforts to enhance its ability of long-term planning and policy implementation, and increase rationality of policy making process. Third, balance among interset groups should take place in the process of policy making. Forth, sound, constructive, and logical activity of interest groups is necessary to express and promote their interests.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2004.06a
• /
• pp.60-61
• /
• 2004

Metabolic engineering is now a well established discipline, used extensively to determine and execute rational strategies of strain development to improve the performance of micro-organisms employed in industrial fermentations. The basic principle of this approach is that performance of the microbial catalyst should be adequately characterised metabolically so as to clearlyidentify the metabolic network constraints, thereby identifying the most probable targets for genetic engineering and the extent to which improvements can be realistically achieved. In order to harness correctly this potential, it is clear that the physiological analysis of each strain studied needs to be undertaken under conditions as close as possible to the physico-chemical environment in which the strain evolves within the full-scale process. Furthermore, this analysis needs to be undertaken throughoutthe entire fermentation so as to take into account the changing environment in an essentially dynamic situation in which metabolic stress is accentuated by the microbial activity itself, leading to increasingly important stress response at a metabolic level. All too often these industrial fermentation constraints are overlooked, leading to identification of targets whose validity within the industrial context is at best limited. Thus the conceptual error is linked to experimental design rather than inadequate methodology. New tools are becoming available which open up new possibilities in metabolic engineering and the characterisation of complex metabolic networks. Traditionally metabolic analysis was targeted towards pre-identified genes and their corresponding enzymatic activities within pre-selected metabolic pathways. Those pathways not included at the onset were intrinsically removed from the network giving a fundamentally localised vision of pathway functionality. New tools from genome research extend this reductive approach so as to include the global characteristics of a given biological model which can now be seen as an integrated functional unit rather than a specific sub-group of biochemical reactions, thereby facilitating the resolution of complexnetworks whose exact composition cannot be estimated at the onset. This global overview of whole cell physiology enables new targets to be identified which would classically not have been suspected previously. Of course, as with all powerful analytical tools, post-genomic technology must be used carefully so as to avoid expensive errors. This is not always the case and the data obtained need to be examined carefully to avoid embarking on the study of artefacts due to poor understanding of cell biology. These basic developments and the underlying concepts will be illustrated with examples from the author's laboratory concerning the industrial production of commodity chemicals using a number of industrially important bacteria. The different levels of possibleinvestigation and the extent to which the data can be extrapolated will be highlighted together with the extent to which realistic yield targets can be attained. Genetic engineering strategies and the performance of the resulting strains will be examined within the context of the prevailing experimental conditions encountered in the industrial fermentor. Examples used will include the production of amino acids, vitamins and polysaccharides. In each case metabolic constraints can be identified and the extent to which performance can be enhanced predicted

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.28 no.2
• /
• pp.31-41
• /
• 1986

Knowledge of the degree of yield reduction due to water stress at different crop growth stages in rice production is important for rational scheduling of irrigation during periods of insufficient water supply. Previous studies to determine the degree of yield reduction duo to water stress suffered from interruptions by rain during experiment. Also the findings did rot relate the degree of water stress to the soil water potential and water deficit status of rice plants. In this study, two years experiments were conducted using the high yielding rice varieties, an Indica x Japonica (Nampoong) and a Japonica variety(Choochung). These were grown in 1/200$^{\circ}$ plastic pots placed under a rainfall autosensing, sliding clear plastic roof facility to control rainfall interruptions. The results obtained were as follows. 1.The two varieties differed in the growth stage most sensitive to water stress as well as the degree of yield reductions. When rice plants were stressed to the leaf rolling score 4 and soil water potential of about - 20 bar at major crop growth stages which included heading, booting, non-effective tillering, panicle initiation and early tillering stages, the yield reductions in the Indica x Japonica variety were 58%, 34%, 27%, 22%, and 21%, respectively, whereas in the Japonica vairety they were 23%, 36%, 1%, 13% and 22%, respectively. This result show that the recommended drainage during non-effective tillering is valid only for the Japonica variety. Sufficient irrigation at booting, heading and early tillering stages are necessary for both varieties. 2.The two varieties showed visible wilting symptoms when the soil water potential dropped to about - 3.0 bar. The Japonica variety showed more leaf rolling than the Indica X Japonica. However, it had a higher retention of leaf water content and greater stomatal diffusive resistance. When the soil water potential dropped, the Japonica variety showed leaf rolling score (LRS) 1 at 0 soil-5. 0 bar and LRS 2 at 0 soil -6.0 bar while the Indica X Japonica showed LRS 1 at 0 soil - 5.5 bar and LRS 2at 0 Soil - 9.0 bar. The stomatal diffusive resistance was maximum at the second top leaf blade in both varieties at intermediate water stress of 0 soil - 4.5 bar. 3.The number of days that was required for the soil water potential to drop to-3. 0 bar and to - 20.0 bar after drainage of irrigation water from the 20cm deep silty clay loam soil in the pots were 6 and 13 days, respectively for booting stage, and 7 and 11 days, respectively for heading stage, 9 and 12 days, respectively for panicle initiation stage, and 12 and 19 days, respectively for early tillering stage. 4.Water stress during the early tillering stage recorded the longest delay in beading time, the largest reduction in panicle numbers and a substantial yield decrease of 20%. This calls for better water management to ensure the availability of water at this stage, particularly during drought periods. In addition, a reexamination of the conventional inter-drainage practice during the non-effective tillering stage is necessary for the high yielding Indica X Japonica varieties.

• THE JOURNAL OF KOREAN ORIENTAL ONCOLOGY
• /
• v.4 no.1
• /
• pp.71-87
• /
• 1998

Even though appropriate immune response is necessary for the survival of the individual, excessive or insufficient immune Response might cause autoimmune or allergic disease. So the immune response must be controlled to the degree that is beneficial for the well being of the individual. This study was undertaken to know the effects of Gunleetang Gagambang on the immune system of the mouse. Gunleetang Gagambang has been used for cure of tumor as a traditional medicine without any experimental evidence to support the rational basis for its clinical use. This study was carried out to evaluate the possible therapeutic or antitumoral effects of Gunleetang Gagambang extract against tumor, and to carry out some mechanisms responsible for its effect. Some kinds of tumor were induced by the typical application of 3-methylcholanthrene(MCA) or by the implantation(s.c) of malignant tumor cells such as leukemia cells(3LL cells) or sarcoma cells(S180 cells). Treatment of the Gunleetang Gagambang on water-extract(dailly 1mg/mouse, i. p.) was continued for 7 days prior to tumor induction and after that the treatment was lasted for 20 days. Against squamous cell carcinoma induced by MCA, Gunleetang Gagambang decreased not only the frequency of tumor production but also the number and the weight of tumors per tumor bearing mice(TBM). Gunleetang Gagambang on also significantly suppressed the development of 3LL cell and S180 cell-implanted tumors in occurrence-frequency and their size. and some developed tumors were regressed by the continuous treatment of Gunleetang Gagambang extract into TBM. In vitro, treatment of Gunleetang Gagambang extract had no effect on the growth of some kinds of cell line such as FsaII, A431 strain but significantly inhibited the proliferation of 3LL, S180 cells and augmented the DNA synthesis of mitogen-activated lymphocytes. Gunleetang Gagambang also stimulated the migrative ability of leukocyte, the MIF and IL-2 production of T lymphocytes, but not IL 6 production of B cells. Gunleetang Gagambang administration to mice enhanced NK cells activities. These results demonstrated that Gunleetang Gagambang extract exhibited a significant prophylactic benefits against tumors and its antitumor activity was manifested depending on the type of tumor cells. And these results also suggested that effect of Gunleetang Gagambang might be chiefly due to nonspecitie enhancement of NK cell activities and cell-mediated immune responses.

• Journal of Korea Port Economic Association
• /
• v.29 no.1
• /
• pp.99-122
• /
• 2013

International Exposition Yeosu Korea 2012 was held from May 12th 2012 to August 12th 2012 in New Port area of Yeosu-city, Jeollanam-do, Korea. 105 Nations and 10 international organizations participated in this mega event, and the total number of visitors amounts to 8.2 million. This study appraises the effectiveness of preparation for Yeosu Exposition. The main focus of this study is not on criticizing the problems that occurred in the transport measures. Instead, it looks at the current aspects of establishment and execution process and suggests how they can be applied differently in future transport management for international mega events held in Korea. The suggestions of this study are as follows. First, when establishing transport management plans for international mega events, the geographical features and trip resistance of the venue must be taken into consideration. Second, tasks should be distributed distinctly between the central government and the local government in order to prevent any dissension or inefficiency. Third, transport management needs to be consistent and transport guidance should be efficient in an effort to minimize visitor inconvenience. Last, transport management must be regarded as objective and rational from the outside view and the budget should follow timely based on this account.

• Journal of the Korea Concrete Institute
• /
• v.21 no.4
• /
• pp.489-499
• /
• 2009

It is quite difficult to predict the flexural strength of post-tensioned members with unbonded tendons (unbonded posttensioned members, UPT members) because of debonding behavior between concrete and prestressing tendons, which is different from that with bonded tendons. Despite many previous researches, our understanding on the flexural strength of UPT members is still insufficient, and thus, national codes use different methods to calculate the strength, which quite often give very different results. Therefore, this paper reviews various existing methods, and aims at proposing an improved rational strength model for UPT flexural members having better accuracy. Additionally, a database containing a large number of test data on UPT flexural members has been established and used for verification of the proposed flexural strength model. The analysis results show that the proposed method provides much better accuracy than many existing methods including the rigid-body model that utilizes the assumption of concentrated deformation and plastic hinge length, and that it also gives proper consideration on the effects of primary parameters such as reinforcement ratio, loading pattern, concrete strength, etc. Especially, the proposed method also well predicts the ultimate stress of unbonded tendons of over-reinforced members, which are often possible in construction fields, and high strength concrete members.