• The korean journal of orthodontics
• /
• v.15 no.1
• /
• pp.115-121
• /
• 1985

This study was intended to investigate the effect of mesiodistal crown widths of the anterior teeth on the incisor relationship and to determine whether incisor width ratio and anterior width ratio could be used to assess interarch tooth width harmony. From the casts taken from 63 subjects, 26 of open bite, 18 of deep bite and 19 of normal over bite with age of 17-20, mesiodistal crown widths of maxillary and mandibular 6 anterior teeth were measured with Boley gauge. On the basis of tooth measurements, anterior and incisor width ratio were calculated. The cephalograms were taken from same subjects to measure the degree of over bite and over jet and to compare the craniofacial bony structures between open bite, deep bite and normal over bite. Correlations among the anterior width ratio, incisor width ratio, over bite and over jet were calculated. The results were as follows. 1. There were no differences in mesiodistal widths of anterior teeth, incisor width ratio and anterior width ratio between open bite, deep bite and normal over bite. 2. The incisor width ratio and anterior width ratio can be useful in the assessment of tooth width harmony because the incisor width ratio and anterior width ratio were stable statistically and significantly correlated with each other. 3. Over bite and over jet were not correlated with incisor width ratio and anterior width ratio.

• Imaging Science in Dentistry
• /
• v.50 no.4
• /
• pp.319-322
• /
• 2020

Purpose: The purpose of this study was to investigate the utility of the width-to-length ratio for the differentiation of ameloblastomas and odontogenic keratocysts in the body of the mandible. Materials and Methods: This study retrospectively reviewed 9 patients with ameloblastomas and 9 patients with odontogenic keratocysts using cone-beam computed tomography. The width-to-length ratio was determined by measuring the ratio between the greatest buccolingual dimension and the greatest perpendicular anteroposterior dimension of the lesion on the axial view. One-way analysis of variance was used to examine the difference in the width-to-length ratio between the 2 types of lesions. Statistical significance was tested at P<0.05. Results: Ameloblastomas showed a mean width-to-length ratio of 0.64, whereas odontogenic keratocysts showed a mean width-to-length ratio of 0.41. The cut-off value with which the 2 types of lesions were differentiated was 0.5. The width-to-length ratios of ameloblastomas were significantly higher than those of odontogenic keratocysts (P<0.05). Conclusion: The width-to-length ratio might be used to differentiate between ameloblastomas and odontogenic keratocysts.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.831-836
• /
• 1989

It was found that the effect of the friction between the roll and the workpiece on the spread ratio in flat rolling processes varies with the width-to-height ratio and the reduction in height by Tozawa, Oh and kobayashi numerically. In the present study, the barrelling profile accompanying the width spread was predicted by using the energy method proposed by Kato, which is known to be one of the most advanced method for the three dimensional analysis of the rolling process. The modified velocity field was applied to compute the width spread and the result was verified by experiments. the analysis by the energy method gave the result that the spread ratio increases with the friction factor when the width-to-height ratio is 1 and decreases when the ratio is larger then 2, being consistent with the results of Tozawa and Oh. Nevertheless the cold rolling experiment for pure aluminium showed that the spread ratio decreases with the increasing friction factor irrespective of the width-to-hight ratio.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.429-437
• /
• 1999

Width variation of the top and bottom ends of steel at finishing rolling in a plate, has been investigated. It was found that width variation after finishing rolling is affected by edging, broadside rolling ratio, longitudinal rolling ratio, width shape after broadside rolling, temperature, width-to-thickness ratio, and so on. A neural network modelling of back propagation has been conducted on the width variation during rolling. Based on these prediction models, a width control system, by which the roll opening and closing of the hydraulic AWC edger can be adjusted during edge rolling in finishing rolling passes, has been developed. Compared to conventional width model, the neural network model is much accurate in a model. The width control system is applied to a newly built production mill.

• Journal of the Ergonomics Society of Korea
• /
• v.11 no.1
• /
• pp.13-19
• /
• 1992

This paper deals with the legibility of Korean characters(Hangeul) on car number licence plates. We focus of the height-width ratio as key factor affecting the legibility in experimental procedures. The results of experiments are; i) For vertica characters, the vest height-width ratio was 1:1 for 3 throuth 5 stroke characters, and 4:5 for 6 and 7 stroke characters. ii) For horizontal characters, the best height-width ratio was 1:1 for 3 through 5 stroke charcters, and 5:4 for 6 and 7 stoke characters.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.2
• /
• pp.93-98
• /
• 2017

PURPOSE. The purpose of this study was to compare the width ratio of maxillary anterior teeth according to age in the Korean population and to evaluate the maxillary central incisor width-to-length (W/L) ratio, given differences in age and gender. MATERIALS AND METHODS. Ninety-three Korean adults were divided into 3 groups (n = 31) by age. Group I was 20 - 39 years old, Group II was 40 - 59 years old, and Group III was over 60 years of age. After taking an impression and a cast model of the maxillary arch, the anterior teeth width ratio and central incisor W/L ratio were calculated from standard digital images of the cast models using a graph paper with a digital single lens reflex (DSLR) camera. The calculated ratios were compared among all groups and central incisor W/L ratio were analyzed according to age and gender. All comparative data were statistically analyzed with one-sample t-tests, one-way ANOVAs with Tukey tests, and independent t-tests. RESULTS. No significant differences in maxillary anterior teeth ratios were found among the age groups. The maxillary central incisor W/L ratios in Group III were the greatest and were significantly higher than those in the other groups. The central incisor W/L ratio of men was higher than that of women in Group II. CONCLUSION. Maxillary anterior teeth width ratios were similar in all age groups in the Korean population. The maxillary central incisor was observed as worn teeth in the group over 60 years of age, and a significant difference between genders was found in 40 to 50 year olds.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.162-169
• /
• 1999

Herringbone groove journal bearing (HGJB) is developed to improve the static and dynamic performances of hydrodynamic journal bearing. Conventional studies on HGJB were based on the Narrow Groove theory assuming that the number of grooves approaches infinity. In this study, an oil lubricated HGJB is analyzed using Finite Element Method. Load carrying capacity, attitude angle, stiffness and damping coefficients are obtained numerically for various bearing configurations especially for the inclined width ratio and asymmetric ratio and compared with the results obtained using Finite Volume Method. The bearing load and stability characteristics are dependent on geometric parameters such as inclined width ratio, asymmetric ratio, groove depth ratio, groove width ratio, groove angle.

• Tribology and Lubricants
• /
• v.16 no.6
• /
• pp.425-431
• /
• 2000

Herringbone groove journal bearing (HGJB) is developed to improve the static and dynamic performances of hydrodynamic journal bearing. Conventional studies on HGJB were based on the Narrow Groove theory assuming that the number of grooves approaches infinity. In this study, an oil lubricated HGJB is analyzed using Finite Element Method. Load carrying capacity, attitude angle, stiffness and damping coefficients are obtained numerically for various bearing configurations especially for the inclined width ratio and asymmetric ratio and compared with the results obtained using Finite Volume Method. The bearing load and stability characteristics are dependent on geometric parameters such as inclined width ratio, asymmetric ratio, groove depth ratio, groove width ratio, and groove angle.

• Transactions of Materials Processing
• /
• v.4 no.2
• /
• pp.151-158
• /
• 1995

In this study, the width spreads of spring steel including Mn-Cr steel(SUP 9A), Mn-Cr-V steel(SUP 11A), and Si-Cr steel(SAE 9254) and were investigated under different reduction ratios and thickness-width ratios friction coefficients. The experimental results were compared with the theoretical prediction by the Ekelund equation, Geuze equations, etc. The width spreads of the three spring steels were found to be 10-15% larger than mild steel, and the optimal reduction ratio for the spring steel was found in a range from 20 to30%. Among the spring steels, the width spread of Mn-Cr-V steel was measured to be the largest followed by those of Si-Cr steel and Mn-Cr steel. It was found that the width spread increased with friction coefficient, width-thickness ratio and reduction ratio as predicted. However, the theoretical predictions revealed smaller width spread than the experimental results. This finding indicates that the coefficients of the width spread of the theoretical models need to be modified in order to predict the actual behavior of the width spreading of the spring steels. In this study, the coefficients of width spread of the Geuze equation were determined from the experimental results.

• Journal of Sasang Constitutional Medicine
• /
• v.18 no.1
• /
• pp.54-61
• /
• 2006

1. Objectives The body shape is an important standard for the classification of Sasang Constitutions. Using physical measure­ments and statistical analysis we can understand it's characteristic objectively. 2. Methods In this study, we have measured body circumferences and widths of 562 patients who were treated with Sasang Constitutional medicine. Their anthropometric data were transformed into the ratio based on Sasang Constitutional medicine. 3. Results (1) Taeyangin female's ratio of iliac width to chest width was most large, but Taeyangin male's was most small. (2) Soyangin's ratios of axillary width to waist width and chest width to iliac width were large. that is, their uppor body was large and lower body was small. (3) Taeumin's ratios of head and neck circumference to body circumference were small. the ratio of waist width to axillary width was most large. (4) Soeumin's ratio of head circumference to waist circumference was most large. and their uppor and lower body was larger than middle body. (5) Irrespective of Sasang Constitutions, male's ratios of axillary width to waist width and chest width to iliac width were larger than female's. 4. Conclusions From the above results, when we classify Sasang Constitutions using physical measurements we must consider gender differences and characteristics of Sasang Constitutional body shape.