• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1228-1236
• /
• 2001

In this study, CT specimens were prepared from ASTH A5l6 steel which was used for pressure vessel plates for moderate and lower temperature service. And we got the fellowing characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$ , $-30^{\circ}C$, $-60^{\circ}C$, $-80^{\circ}C$, $-100^{\circ}C$ and $-120^{\circ}C$ and in the range of stress ratio of 0.1, 0.3 by means of opening mode displacement. At the constant stress ratio, the Threshold stress intensity factor range ΔAKth in the early stage of fatigue crack growth (Region I) and stress intensity factor range $\DeltaK$ in the stable of fatigue crack growth (Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da/dN-$\Delta$K in Region II that is, the fatigue clack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate da/dN is rapid in proportion to descend temperature in Region II and the cryogenic-brittleness greatly affect a material with decreasing temperature.

• 한국게임학회 논문지
• /
• 제16권5호
• /
• pp.99-110
• /
• 2016

본 논문은 개발자가 의도한 화면을 다양한 해상도의 모바일 기기에서 동일한 비율의 게임 화면 출력을 지원하기 위한 적응적 방법을 제안한다. 원하는 비율로 게임 화면의 일부만 출력하는 방식을 클리핑(clipping) 기법이라 하며 업계에서 기존에 쓰고 있는 기법이다. 다양한 해상도에 대응하기 위해 개발자들은 의도하는 게임 화면을 해상도에 따라 다양하게 제작해야하기 때문에 추가적인 개발 비용이 발생하게 된다. 그러나 하나의 설정 화면비율과 사용하는 기기의 화면 비율과의 관계에 맞춰 자동으로 배율을 계산하여 출력을 해준다면 개발시간을 절감할 것이다. 본 연구의 제안 알고리즘을 이용하면 다양한 해상도에서 게임제작화면을 자동으로 동일한 비율로 디스플레이가 가능하며 또한 모바일 기기의 해상도에 상관없이 미니맵이 자동 고정되도록 출력하는 것도 지원 가능하다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.270-271
• /
• 2014

In this study, a replacement ratio of blast furnace slag coarse aggregate and a water binder ratio by an optimum combination of PHC file was investigated. As a results, the target strength 78.5MPa was altogether satisfied in a mix proportion 28-G100-SG0 and W/B ratio 26 %. The surface rupture was generated in 28-G0-SG100 combination after curing with the autoclave. According to the result of measuring the ingredient, the majority were the MgOH2 hydrate.

• 한국주거학회논문집
• /
• 제15권4호
• /
• pp.107-115
• /
• 2004

The purpose of this paper is to study on the architectural value in Dom-Ino system. Dom-Ino system by Le Corbusier is a structural system for effective production in terms of physical reproductivity and a modeling system from the view of formal composition. It creates planar grid with a fixed ratio, manipulates the user group, and becomes the basic construction method. Form comes out of geometrical proportion system, and grid-based plan provides regularity and order to elevation planning. Production requires standardization. Indoor space is maintained by uniformed and integrated service facilities. Dom-Ino system was a transitional step of the Modulor system which was created by Le Corbusier in 1945 and composes of and equivalent proportional system. The fact that the numerical proportion system is the one of appropriate design methods implys a progressive concept that architectural configurations are controlled by the technology of that time. And also the system is one of the object type of Corbusier's housing architecture.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권3호
• /
• pp.161-166
• /
• 2001

The influence of the consumed carbon to nitrogen (C/N) ratio on mycelial morphology was investigated in cultures of Mortierella alpina using shake flasks. The consumed C/N ratio was varied from 5 to 32 under the condition that the total initial amount of the carbon and nitrogen sources was 50g/L. The whole mycelia and filamentous mycelia exhibited no relationship with the consumed C/N ratio below a consumed C/N ratio of 20 in the presence of either excess carbon or excess nitrogen. However, when the consumed C/N ratio increased higher than 20, the mycelial sizes increased in proportion to the consumed C/N ratio. However, the area ratio of filamentous mycelia to total mycelia was found to be independent of the consumed C/N ratio, and remained constant at 0.82. In the case of a fixed consumed C/N ratio of 20, the whole mycelia and filamentous mycelia increased in proportion to the degree of the medium strength, yet the area ratio of filamentous mycelia to total mycelia remained unchanged at 0.76. Accordingly, these results show that fungal morphology and mycelial size are both affected by the ratio of carbon to nitrogen. The findings of the current study will be helpful in obtaining the efficient production of useful bioproducts from fungal cultures.

• 한국농공학회지
• /
• 제17권3호
• /
• pp.3815-3832
• /
• 1975

This study was made to investigate various engineering properties of earth materials resulting from their changes in density and moisture content. The results obtained in this study are summarized as follows: 1. The finner the grain size is, the bigger the Optimum Moisture Content(OMC) is, showing a linear relationship between percent passing of NO. 200 Sieve (n) and OMC(Wo) which can be represented by the equation Wo=0.186n+8.3 2. There is a linear relationship of inverse proportion between OMC and Maximum Dry Density (MDD) which can be represented by the equation ${\gamma}$d=2.167-0.026Wo 3. There is an exponential curve relationship between void ratio (es) and MDD whose equation can be expressed ${\gamma}$d=2.67e-0.4550.9), indicating that as MDD increases, void ratio decreases. 4. The coefficent of permeability increases in proportion to decrease of the MDD and this increase trend is more obvious in coarse material than in fine material, and more obvious in cohesionless soil than in cohesive soil. 5. Even in the same density, the coefficient of permeability is smaller in wet than in dry from the Optimum Moisture Content. 6. Showing that unconfined compressive strength increases in proportion to dry density increase, in unsaturated state the compacted in dry has bigger strength value than the compacted in wet. On the other hand, in saturated state, the compacted in dry has a trend to be smaller than the compacted in wet. 7. Even in the same density, unconfined compressive strength increases in proportion to cohesion, however, when in small density and in saturated state, this relationship are rejected. 8. In unsaturated state, cohesion force is bigger in dry than in wet from OMC. In saturated state, on the other hand, it is directly praportional to density. 9. Cohesion force decreases in proportion to compaction rate decrease. And this trend is more evident in coarse matorial than in fine material. 10. Internal friction angle of soil is not influenced evidently on the changes of moisture content and compaction rate in unsaturated state, On the other hand in saturated state it is influenced density. 11. Cohesion force is directly proportional to unconfined compressive strength(qu), indicating that it has approximately 35 percent of qu in unsaturated state and approximately 70 percent of qu in saturated state.

• 한국수학사학회지
• /
• 제22권3호
• /
• pp.131-152
• /
• 2009

에우독소스의 비례론이 데데킨트가 실수를 현대적으로 정의한 '데데킨트 절단'과 일치한다고 해도 과언이 아니다. 데데킨트는 2000년보다 더 앞선 에우독소스의 방법을 근거로 조사함으로써 실수체계에 대한 확고한 기초를 확립하였다고 볼 수 있다. 그래서 데데킨트의 정의에서 그리스 유산을 구별하는 것은 가치가 있을 것으로 판단된다. 그런데 에우독소스의 비례론과 데데킨트 절단 사이에는 '근본적인 차이'가 존재한다. 그리스인들은 수(number)와 공간적 크기(magnitude)사이의 구별에 생각이 미치지 못한 것으로 보인다. 본 논문에서는 비와 비례 개념에 대한 에우독소스의 설명과 '데데킨트 절단'을 통한 실수의 구조와의 관계를 살펴봄으로서 에우독소스의 비례론이 데데킨트의 실수의 완비성을 증명하기 위해 도입된 절단의 개념과 어떤 관계가 있으며 어떤 영향을 끼쳤는지를 고찰하고자 한다.

• 한국건설순환자원학회논문집
• /
• 제5권3호
• /
• pp.55-62
• /
• 2010

오늘날 각종폐기물 발생량이 증가되는데, 본 실험 연구에서는 미장 및 벽돌 제조용의 배합비를 적용하여 시멘트 모르타르의 하수슬러지 소각재의 폐기물을 이용하여 활용가능성에 대한 기초적 자료를 제시함이 본 연구의 목적이다. 실험에 따른 결과를 종합해 볼 때, 배합비 1:2의 하수슬러지 10%와 황토의 소량 첨가율과 배합비 1:7의 경우 압축강도가 다소 작지만 석분과 하수슬러지 10% ~ 20%를 첨가하면 하수슬러지를 재순환 할 수 있으며, 환경 친화적인 재료의 기초적 자료로 활용 가능할 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.465-468
• /
• 2008

본 연구는 영, 호남 지역의 레미콘 공장에서 현재 사용하고 있는 잔골재의 특성을 분석하고, 혼합사용 시 잔골재율 조정에 따른 콘크리트의 특성실험을 통하여 혼합사용 시 최적조건을 분석한 것으로 그 결과를 요약하면 다음과 같다. 영, 호남에서 사용하는 골재 종류별 물성은 조립률 및 0.08mm체 통과량을 제외하고 모두 KS F 2526 및 KS F 2527의 규정에 적합한 것으로 나타났는데, 각 공장에서는 단독사용이 부적합한 골재를 2종 이상 적절한 비율로 혼합사용하고, KS규정에 적합하게 품질을 관리하고 있었다. 영, 호남 각 공장에서 단위용적질량법에 의해 산출한 잔골재율로 조정한 콘크리트의 배합은 기존의 출하배합보다 높은 유동성을 보이는 것으로 나타났는데, 이는 잔골재율 약 2% 저감에 따라 잔골재의 표면적 감소 및 공극감소에 따른 시멘트 페이스트의 유동성에 미치는 잉여수량의 상대적 증가에 기인한 것으로 분석된다. 따라서 최적 잔골재율을 적용함으로써 단위수량 감소로 인한 경제적인 콘크리트 배합과 콘크리트의 내구성을 증진시키는 효과가 있을 것이라 사료된다.

• 한국해양공학회지
• /
• 제14권3호
• /
• pp.78-83
• /
• 2000

In this study, CT specimens were prepared from AST SA516 Gr. 70 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at 25$^{\circ}C $, -60$^{\circ}C $, -80$^{\circ}C $ and -100$^{\circ}C $ and in the range of stress ratio of 0.05, 0.3 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range ${\delta} K_{th}$ in the early stage of fatigue crack growth (Region I) and stress intensity factor range $\delta $K in the stable of fatigue crack growth (Region II) were increased in proportion to descending temperature. It was assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da/dN -$\delta $K in Region II, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It was assumed that the fatigue crack growth rate da/dN is rapid in proportion to descending temperature in Region II and the cryogenic-brittleness greatly affect a material with decreasing temperature.