• 자원ㆍ환경경제연구
• /
• 제11권4호
• /
• pp.689-706
• /
• 2002

This paper makes some contributions on optimal environmental taxes in the generalized utilitarian social welfare function. It is not to suggest as to appropriate environmental tax rates but to contribute the direction of environmental tax policy. The tax rates depend on parameters of individual utility function (CES utility function) and social welfare function and income tax rate. The major findings are that, as the elasticity of substitution between labor and leisure and the concavity of social welfare function increase, both the optimal tax rates and the government demogrants rise. And, as the parameter of environmental pollution in the individual utility function increases, the optimal tax rates also increase. For the future study, this model involves the income tax and the capital tax as endogenous variables and the wage changes due to international trade.

• Journal of Communications and Networks
• /
• 제5권1호
• /
• pp.1-6
• /
• 2003

In this paper, we extend the derivation of the iterative soft-output Viterbi algorithm (SOVA) for partial response (PR) channels, and modify its decoding process such that it works consistently for arbitrary high code rates, e.g., rate 64/65. We show that the modified SOVA always outperforms the conventional SOVA that appears in the literature with a significant difference for high code rates. It also offers a significant cut down in the trace-back computations. We further examine its performance for parallel and serial concatenated codes on a precoded Class IC partial response (PR4) channel. Code rates of the form $\frac{k_0}{k_0+1}$($k_0$ = 4, 8, and 64) are considered. Our simulations indicate that the loss suffered by the modified SOVA, relative to the APP algorithm, is consistent for all code rates and is at most 1.2 dB for parallel concatenations and at most 1.6 dB for serial concatenations at $P_b$ = $10^{-5}$.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.75-76
• /
• 2011

Hot-rolled steel plates of SPHC and SS400 were oxidized at 600, 750 and $900^{\circ}C$ for 2hr in air. With an increase in oxidation temperature, their oxidation rates increased, being accompanied with formation of pores and cracks in the thickened oxide scales that were non-adherent. The SPHC steels that were manufactured by either the arc furnace or the blast furnace displayed similar oxidation rates, indicating that their oxidation rates were insensitive to the manufacturing processes. The medium-carbon SS400 steel displayed a little faster oxidation rates than the low-carbon SS400 steel, indicating that the carbon content did not significantly influence the oxidation rates.

• 응용통계연구
• /
• 제25권6호
• /
• pp.877-887
• /
• 2012

The Bank of Korea changed its method of GDP estimation from a fixed-weighted to a chain-weighted measure in 2009. The fixed-weighted method had had problems such as substitution bias and the rewriting of economic history. As a result of the change, annual growth rates calculated using the chain-weighted method from 1970 through 2008 turned out to be 0.8%p higher on average than the existing rates. The quarterly average chain-weighted growth rates were 0.19%p higher than the fixed-weighted ones, but they changed in the same directions. In this paper we analyze whether the differences in rates between the two calculation methods would bring about a difference in the cyclical characteristics of GDP. We conclude that although there were differences in growth rates after introduction of the chain-weighted method, there was no difference in the cyclical fluctuation.

• Korea-Australia Rheology Journal
• /
• 제15권2호
• /
• pp.63-73
• /
• 2003

An experimental technique was developed to determine the strain-rate in a tensile specimen. Then one can calculate the transient isothermal elongational viscosity. Both shear and elongational viscosities were measured to study the effect of shear and elongational fields on the flow properties. The comparison between these viscosities shows that the onset of rapid viscosity growth as crystallization solidification proceeds occurs at about the same value of time at very small deformation rates (0.0028 and 0.0047 $s^{-1}$). The comparison of these measured viscosities as functions of shear and elongational Hencky strains also reveals that the onset of rapid viscosity growths starts at critical Hencky strain values. The behaviour of steady shear viscosity as function of temperature sweep was also explored at three different low shear rates. Finally, the influence of changing oscillatory frequencies and strain rates was also investigated.

• 상하수도학회지
• /
• 제11권4호
• /
• pp.118-125
• /
• 1997

Conventional sedimentation method has some limitations for turbidity removal in water treatment because drinking water sources are getting polluted. Removal rates of turbidity using DAF and sedimentation process were compared for various water conditions to know whether DAF is effective to improve sedimentation process. Water samples were clay(gravity 2.65) water 100mg/l, H raw water, mixed water of H raw water and clay 100mg/l, and mixed water of HA(Humic Acid) 5mg/l and clay 100mg/l. Other parameters were temperature, coagulants(Alum, $FeCl_3$), and treatment time. Water temperature greatly affected in removal rates of turbidity for sedimentation and DAF. Generally DAF was more effective in removal rates of turbidity than sedimentation at the same experimental condition. Removal rates of $UV_{254}$ were high to over 90%, and independent of temperature and coagulant.

• 한국식품영양학회지
• /
• 제12권4호
• /
• pp.358-363
• /
• 1999

This study was conducted to evaluate the extraction methods for the determination of antioxidants in soybean oil. Recovery rates of various antioxidants in soybean oil showed similar rates as 80.4~102.1% by solvent/solvent extraction method and 89.9~106.4% by sweep co-distillation method except 46.6~61.2% of PG at corresponding spiked concentractions. The maximun recovery rates of antioxidnts were obtained when extraction time and extraction temperature used in UNITREX were 20min and 21$0^{\circ}C$ respectively. In the recovery rates with the activation of florisil when 2% ofwater was added to florisil the highest recovery rates for TBHQ, BHA, BHT were obtained by sweep co-distillation met-hod. Therefore sweep co-distillation method showed less solvent simple operation and high recovery rate compared with solvent/solvent extraction method.

• 대한금속재료학회지
• /
• 제48권10호
• /
• pp.907-913
• /
• 2010

Hot-rolled steel plates of SPHC and SS400 were oxidized at 600, 750 and $900^{\circ}C$ for 2 hr in air. With an increase in the oxidation temperature, their oxidation rates increased, and this was accompanied by the formation of pores and cracks in the thickened oxide scales, which were non-adherent. SPHC steels manufactured by either an arc furnace or a blast furnace displayed similar oxidation rates, indicating that their oxidation rates were insensitive to the manufacturing process. Medium-carbon SS400 steel displayed somewhat faster oxidation rates than low-carbon SS400 steel, indicating that the carbon content did not significantly influence the oxidation rates.

• 현장농수산연구지
• /
• 제11권1호
• /
• pp.95-101
• /
• 2009

약용 및 관상식물로 개발가치가 있는 백리향의 종자발아 및 삽목조건 구명을 위한 몇 가지 실험결과는 아래와 같다. 종자발아는 20℃ 광 조건에서 89%의 발아율로 가장 좋았다. 적정 삽목시기는 5월20일이 94%의 발근율로 가장 양호했고, 삽목용토는 단용보다는 peatmoss(50%) + perlite(50%) 혼용처리에서 좋았으며 삽목전 삽수의 IBA 처리농도는 100mg/L 침지처리에서 96% 발근율을 나타내었다.

• Computers and Concrete
• /
• 제32권4호
• /
• pp.383-392
• /
• 2023

The mechanical properties of Recycled Aggregate Concrete (RAC) with 100 percent Recycled Coarse Aggregate (RCA) under loading rates were investigated in depth. The theoretical model was validated utilizing the RAC elastic modulus obtained from cylindrical specimens subjected to various strain rates. Viscoelastic theories have traditionally been used to describe creep and relaxation of viscoelastic materials at low strain rates. In this study, viscoelastic theories were extended to the time domain of high strain rates. The theory proposed was known as reversed viscoelastic theory. Normalized Dirichlet-Prony theory was used as an illustration, and its parameters were determined. Comparing the predicted results to the experimental data revealed a high level of concordance. This methodology demonstrated its ability to characterize the strain rate effect for viscoelastic materials, as well as its applicability for determining not only the elastic modulus for viscoelastic materials, but also their shear and bulk moduli.