• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.309-314
• /
• 1996

Feasibility study has been accomplished to evaluate the effectiveness of the in-vessel core debris cooling through lower cavity flooding using two dimensional finite difference scheme. The volume of cerium pool and decay power rate generated in corium pool were evaluated as important parameters to the temperature distribution on the reactor vessel lower head through previous works. In this study, the corium volume based on the System 80＋ core structure and time dependent decay power rate are considered for feasibility evaluation. In addition, preliminary plans for the in-vessel core debris cooling through lower cavity flooding as severe accident management strategy, i.e. flooding timing, method and capacity, are suggested based on the result of the numerical study, international tendency related to in-vessel core debris cooling through lower cavity flooding.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.405-410
• /
• 1996

New methodology for mass and energy release assessment in LBLOCA post blowdown is needed and, first of all, the phenomenologically improved and quantitative assessments through experiment are essential. For tile experiment of a hot leg break LBLOCA in post blowdown, the test facility was set and its feature is that tile broken hot leg has two broken sections in the tore side and in the SG side respectively and a separation valve between the two in order to measure the release rate dividedly. Specially it was focused on whether the mass release through the SG side broken section happened or not. The mass release through the core side broken section is dependent on tile safety injection flow and that through the SG side broken section varies depending on several factors. The principal factor is the primary system pressure and the subfactors such as SI flow rate, SI temperature and initial primary pressure, may contribute, too.

• Tribology and Lubricants
• /
• v.24 no.2
• /
• pp.72-76
• /
• 2008

There are 5 kinds of architectural fabrics in our country recently. The test piece were made by attaching on the steel disk which has been tested of various range of the test conditions in pin-on-disk wear testing machine. The results show that the friction coefficient and wear rate of the architectural fabrics are heavily dependent on the load and materials. PVDF type was better than others in wear rate and friction coefficient.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.9-12
• /
• 2000

The importance of the role of plastic spin in the rate-dependent response of materials at large deformations is the main objective of this work. After a brief presentation of a general consitutive framework for visco-rigid plasticity at large strains an isotropic/kinematic hardening and a visco-rigid plastic model are used to analyze the stress-strain response under simple shear. A clear understanding of the role of plastic spin is achieved by obtaining numerical analyzed results for different stress values in which the plastic spin consititutive parameters interrelaste with the strain rate and other more conventional model constants, Especially this paper is concerned with introducing behaviors of Al7075

• Journal of Korean Society on Water Environment
• /
• v.21 no.6
• /
• pp.595-601
• /
• 2005

In this research, effects of water circulation on phosphorus release from sediment into water body were studied. Sediments sampled at the Daechung Lake were used for the column experiments with circulation and non-circulation conditions. Deaeration coefficient, $K_1$ and reaeration coefficient, $K_2$ of non-circulation condition were 0.133 and 0, respectively, while $K_1$ and $K_2$ for circulation condition were 0.46 and 0.018, respectively. Oxidation Reduction Potential (ORP) showed a linear relationship with dissolved oxygen (DO) when DO is over 2 mg/L. Phosphorus concentration induced by phosphorus release from sediment was highly dependent upon DO, ORP, and pH. Under anaerobic condition, phosphorus release rate was higher for $Fe^{2+}$-bounded phosphorus compared to that of $Ca^{2+}$-bounded phosphorus.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.391-394
• /
• 2003

The applicability of in situ microbial filter or biobarrier technology for the remediation of soil and groundwater contaminated with chlorinated solvents was investigated. The efficiency and rates of reductive dechlorination of chlorinated solvents are known to be highly dependent on hydrogen concentration. In this study, the effect of electron donors on the reductive dechlorination of PCE was investigated using vermicompost (worm casting) and peat as permeable reactive barrier medium The effect of organic acids (lactate, butyrate and benzoate), yeast extract and vitamin $B_{l2}$ on the reductive dechlorination was investigated. Compared to the control (no electron donor added), addition of electron donors stimulated the dechlorinated rate. Among the electron donor treatments, lactate/benzoate amendment exhibited the highest dechlorination rate. Since vermicompost and peat are inexpensive and biodegradable and have high sorption capacity, they could be successfully used as biobarrier media, especially when electron donors (for example, lactate/benzoate) are added.d.

• Phonetics and Speech Sciences
• /
• v.8 no.3
• /
• pp.39-49
• /
• 2016

The present study examined the change of aerodynamic features after laryngomicrosurgery in patients with vocal polyps. Aerodynamic evaluation was performed in thirty-nine patients (15 males and 24 females) one week before surgery and four weeks after surgery. Evaluation protocols of vital capacity, maximum sustained phonation(MXPH), and voicing efficiency(VOFT) were used to collect 29 phonatory aerodynamic measures, requiring voice with a comfortable pitch and loudness. Statistically significant changes were found for phonation time and airflow values in the MXPH protocol, while changes were also found for airflow values, subglottal pressure values and acoustic resistance values in the VOFT protocol. Although phonation time was increased in both male and female patients, gender-dependent changes were found in airflow measurements. Men's phonation time increased with no difference in airflow rate, but women's phonation time increased with decreased airflow rate and lower subglottal pressure. The changes of aerodynamic features may be affected by women's self-perceived change for vocal attitude, which was reducing sense of vocal effort after surgery.

• Proceedings of the IEEK Conference
• /
• 2002.06c
• /
• pp.83-86
• /
• 2002

This paper intends to provide convenience to the disabled, losing the use of their limbs, through voice recognition technology. The voice recognition part of this system recognizes voice by DTW (Dynamic Time Warping) Which is most Widely used in Speaker dependent system. Specially, S/N rate was improved through Wiener filter in the pre-treatment phase while considering real environmental conditions; the result values of 12th order feature pattern per frame are extracted by DTW algorithm using LPC and Cepsturm in feature extraction process. Furthermore, miniaturization is pursued using TMS320C32, 71's the floating-point DSP, for the hardware part. Currently, 90% of hardware porting has been completed, but we can confirm that the recognition rate was 96% as a result of performing the DTW algorithm in PC.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1974-1976
• /
• 1996

An electrostatically driven comb actuator with $525{\mu}m$ height was fabricated using (110) Si anisotropic etching in the Potassium Hydroxide(KOH) solution. The etch-rate and etch-rate ratio are strongly dependent on the weight % and temperature of KOH solution. We developed the optimal condition for the anisotropic etching on (110) wafer with varying these conditions. The force that the comb-drive actuator generates is inversely proportional to the distance of gap and proportional to the height of the comb electrodes. The electrodes must have the high aspect ratio. The (110) Si anisotropic etching is very useful to get a high aspect ratio structure.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.7
• /
• pp.1770-1779
• /
• 1995

A combined convective heat transfer study for non-Newtonian fluids was experimentally performed in uniformly heated horizontal tubes with laminar flow in the thermal entry region. Velocity profiles were fully developed at the entrance of the heated sections in the tubes. Aqueous solutions of sodium carboxymethylcellulose(CMC ) were used; their behavior showed a reasonably good fit into the power-law model, .tau.=K.gamma.$^{n}$ . The test sections were made of copper with inside diameters of 3.23 cm and 5.042 cm and lengths of approximately 300 cm. Most experimental runs displayed noticeable secondary flows caused by buoyancy ; when present, secondary flows caused significant increase in the rate of heat transfer over the purely forced-convection case. A correlation, which relates the rate of heat transfer for flows with temperature-dependent properties, free convection effects, and non-newtonian effects, was suggested.