• Environmental Analysis Health and Toxicology
• /
• v.20 no.1
• /
• pp.57-65
• /
• 2005

Effects of five polycyclic aromatic hydrocarbon (PAHs) constituents (naphthalene, fluorine, fluoranthene, benzo(a)pyrene, pyrene) on fertilization and early development of sea urchin egg, sperm and fertilized egg were investigated. The eggs, sperm and fertilized eggs were exposed to several concentrations of PAHs (1, 10, 100, 1000 and 10000㎍/L). The rate of fertilization and hatching decreased when the eggs and sperm were exposed to aqueous solution of PAHs. Also, Exposure of fertilized eggs with each PAHs did decrease survival and hatching rate. Concentration-dependent toxic effects on the rate of fertilization, hatching, survival and abnormality in A. crassispina were observed following exposure to PAHs (1, 10, 100, 1000 and 10000㎍/L). These data show that PAHs exposure decreased in fertilization success of sea urchin egg and sperm and producted abnormal embryo. It is plausible to suggest that PAHs had the potential to significantly reduce coastal recruitment of sea urchin.

• Journal of Radiation Protection and Research
• /
• v.29 no.2
• /
• pp.91-96
• /
• 2004

A practical methodology for the determination of derived intervention levels (DILs) on relocation following an accidental release of radionuclides was designed based on dose rate on the ground. The influence of DILs was investigated with respect to the change of parameter values, which are dependent on socio-environmental characteristics in distinction from temporary and permanent relocations. The DILs on relocation showed a distinct difference depending on effective removal half-life of radionuclides following a deposition, delay time in measurement and residential characteristics. In particular, the delay time. In measurement was an important factor in determination of DILs in the case of an assumption that dose rate on the ground declines in a power function, not in an exponential function. The DILs showed lower numerical values as longer effective half-life, longer delay time In measurement and longer exposure time.

• Biomedical Science Letters
• /
• v.9 no.2
• /
• pp.75-84
• /
• 2003

To evaluate the influence of hepatic oxygen free radical systems on liver injury by topical p-phenylenediamine (PPD) application on rat skin, PPD (25 mg/16.5 $\textrm{cm}^2$) was topically applied to the abdominal region 5 times every other day and sacrificed. By PPD treatment, increasing rate of liver weight/body weight (%), serum activities of alanine aminotransferase and aspartate aminotransferase and decreasing rate of microsomal glucose-6-phosphatase activity were higher in the rats fed tungstate supplemented diet than those fed a standard diet. These findings indicate that group fed tungstate supplemented diet have more severe liver injury compared with group fed standard diet on topical PPD application. However, the activities of oxygen free radical generating enzymes such as xanthine oxidase (XO) and cytochrome P450 dependent aniline hydroxylase and those of oxygen free radical scavenging enzymes were not found to be different between these two animal groups. In the present study, a novel monitoring method to detect the generating of oxygen free radicals in liver extract was devised. Throughout this method, the oxidized PPD produced by oxygen free radicals was determined colorimetrically. The increasing rate of PPD oxidation by liver homogenate was higher in tungstate fed animals than in standard diet fed ones. Among the fractionations of liver extract, the mitochondrial and postmitochondrial fractions in the liver extract of tungstate fed animals led to a higher availability of PPD oxidation by PPD treatment compared with standard diet fed ones. In conclusion, these results suggest that an enhanced liver injury in tungstate fed animals treated with PPD may be due to oxygen free radicals produced in other systems except oxygen free radicals generating from cytosolic XO system. Especially, oxidative availability by PPD can be used for oxygen free radical detection in some tissue.

• Membrane Journal
• /
• v.6 no.1
• /
• pp.22-31
• /
• 1996

Pervaporation experiments of isopropanol-water mixtures through a polydimethytsiloxane(PDMS) membrane were carried out at 35$^{\circ}$C and the effect of isopropanol concentration on the separation characteristics was investigated. The total permeation rate showed the largest deviation from the ideal permeation rate at the isoprpanol volume fraction from 0.5 to 0.7, which resulted from the interaction effect between permeants. The plasticizing effect of isopropanol enhanced the permeation of water, while the existance of water resulted in the depression of isopropanol permeation. Both the permeation rate and the selectivity were predicted using Flory-Huggins thermodynamics and modified Maxwell-Stefan equation. The concentration-dependent diffusion coefficients were expressed by Vignes equation. The Flory-Huggins interaction parameter between isopropanol and water was calculated using excess Gibbs energy correlation and the interaction parameters between liquid and polymer membrane were determined by equilibrium swelling experiments. The predicted permeation rates were in accord with the experimental ones within maximum error range of 35 %. The predicted permeation selectivities were in good agreement with the experimental values.

• Korean Journal of Materials Research
• /
• v.12 no.9
• /
• pp.701-705
• /
• 2002

High temperature tensile test has been performed at $450^{\circ}C$ at different strain rate with various grain size due to different reduction rate of Al-4wt%Mg-0.4wt%Sc alloy which is known to be one of useful superplastic alloys. The grain size of Al-4wt%Mg-0.4wt%Sc alloy is $67~100\mu\textrm{m}$ which is courser than that of the alloy which is commonly used as the superplastic material. The total elongation of the Al-4wt%Mg-0.4wt%Sc alloy is strongly dependent on the average grain size, and is a linear function of the inverse average grain size for the present alloy.

• The Korean Journal of Pharmacology
• /
• v.31 no.2
• /
• pp.145-152
• /
• 1995

The effects and interactions of $4{\beta}-phorbol$ 12,13-dibutyrate(PDB) and polymyxin B(PMB) with adenosine on the electrically-evoked norepinephrine (NE) release were studied in the rat hippocampus. Slices from the rat hippocampus were equilibrated with $^3H-noradrenaline$ and the release of the labelled product, $^3H-NE$, which evoked by electrical stimulation$(3\;Hz,\;2\;ms,\;5\;VCm^{-1},\;rectangular\;pulses)$ was measured. PDB$(0.3{\sim}10\;{\mu}M)$, a selective protein kinase C(PKC) activator, increased the evoked NE release in a dose related fashion while increasing the basal rate of release. And the effects of $1\;{\mu}M$ PDB were significantly inhibited by $0.3\;{\mu}M$ tetrodotoxin(TTX) pretreatment or $Ca^{++}-free$ medium. $PMB(0.03{\sim}1\;mg)$, a specific PKC inhibitor, decreased the NE release in a dose dependent manner while increasing the basal rate of release. Adenosine $(1{\sim}10\;{\mu}M)$ decreased the NE release without changing the basal rate of release, and this effect was significantly inhibited by 8-cyclopentyl-1,3-dipropylxanthine$(2\;{\mu}M)$, a selective $A_1-receptor$ antagonist, treatment. Also, adenosine effects were significantly inhibited by PDB-and PMB-pretreatment. These results suggest that the PKC plays a role in the NE release in the rat hippocampus and might be participated in a post-receptor mechanism of the $A_1-adenosine$ receptor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.9
• /
• pp.552-558
• /
• 2016

Goethite, ${\alpha}$-FeOOH have various applications such as absorbent, pigment and source for magnetic materials. Goethite particles were synthesized in a two step process, where $Fe(OH)_2$ were synthesized in nitrogen atmosphere using $FeSO_4$ as a raw material in the first process, and after that acicular goethite particles were obtained in an air oxidation process of $Fe(OH)_2$ in highly alkaline aqueous solution. Their phase and microstructure were investigated with XRD and FE-SEM. It was found that the morphology of goethite and the ratio of length-to-width (aspect ratio) of acicular goethite are dependent on the some factors such as R value ($OH^-/Fe^{2+}$), air flow rate and pH conditions. In particular, R value has the strongest influence on the synthesized goethite morphology. It is considered that the optimal value R is 4.5 because X-ray diffraction peaks of goethite have the highest intensity at that value. Morphology of goethite particles was controlled by air flow rates, showing that their size and aspect ratio are getting smaller and decrease, respectively as air flow rate increases. The largest goethite particle obtained is about 1,500 nm in length and 150 nm in diameter.

• Nuclear Engineering and Technology
• /
• v.43 no.6
• /
• pp.557-566
• /
• 2011

A cold spray coating (CSC) of copper was studied for its application to a high-level radioactive waste (HLW) disposal canister. Several copper coatings of 10 mm thick were fabricated using two kinds of copper powders with different oxygen contents, and SS 304 and nodular cast iron were used as their base metal substrates. The fabricated CSC coppers showed a high tensile strength but were brittle in comparison with conventional non-coating copper, hereinafter defined to as "commercial copper". The corrosion behavior of CSC coppers was evaluated by comparison with commercial coppers, such as extruded and forged coppers. The polarization test results showed that the corrosion potential of the CSC coppers was closely related to its purity; low-purity (i.e., high oxygen content) copper exhibited a lower corrosion potential, and high-purity copper exhibited a relatively high corrosion potential. The corrosion rate converted from the measured corrosion current was not, however, dependent on its purity: CSC copper showed a little higher rate than that of commercial copper. Immersion tests in aqueous HCl solution showed that CSC coppers were more susceptible to corrosion, i.e., they had a higher corrosion rate. However, the difference was not significant between commercial copper and high-purity CSC copper. The decrease of corrosion was observed in a humid air test presumably due to the formation of a protective passive film. In conclusion, the results of this study indicate that CSC application of copper could be a useful option for fabricating a copper HLW disposal canister.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.3
• /
• pp.1-6
• /
• 2007

A 3-tonf-class high pressure sub-scale combustor was designed and manufactured to study the performance improvement of combustor. The combustor consists of a combustion chamber with film cooling, thermal barrier coating and water cooling channels to prevent thermal demage of the hardware and an injector head with 37 coaxial swirl injectors. Hot-firing tests were carried out at the design point with varying flow rate for film cooling. The test result revealed that the increase of film cooling flow rate decreases the combustion performance, but in the cases of similar film cooling flow rates, the combustion performance is dependent on the mixture ratio of main injector excluding the film cooling flow rate.

• Journal of Preventive Medicine and Public Health
• /
• v.54 no.4
• /
• pp.238-244
• /
• 2021

Objectives: Previous pandemics have demonstrated that several demographic, geographic, and socioeconomic factors may play a role in increased infection risk. During this current coronavirus disease 2019 (COVID-19) pandemic, our aim was to examine the association of timing of lockdown at the county level and aforementioned risk factors with daily case rate (DCR) in the United States. Methods: A cross-sectional study using publicly available data was performed including Americans with COVID-19 infection as of May 24, 2020. The United States counties with >100 000 population and >50 cases per 100 000 people were included. The independent variable was the days required from the declaration of lockdown to reach the target case rate (50/100 000 cases) while the dependent (outcome) variable was the DCR per 100 000 on the day of statistical calculation (May 24, 2020) after adjusting for multiple confounding socio-demographic, geographic, and health-related factors. Each independent factor was correlated with outcome variables and assessed for collinearity with each other. Subsequently, all factors with significant association to the outcome variable were included in multiple linear regression models using stepwise method. Models with best R² value from the multiple regression were chosen. Results: The timing of mandated lockdown order had the most significant association on the DCR per 100 000 after adjusting for multiple socio-demographic, geographic and health-related factors. Additional factors with significant association with increased DCR include rate of uninsured and unemployment. Conclusions: The timing of lockdown order was significantly associated with the spread of COVID-19 at the county level in the United States.