• Journal of the Korean Chemical Society
• /
• v.37 no.12
• /
• pp.1035-1046
• /
• 1993

Some iron(III)porphyrin complexes were prepared, and identified by the spectroscopic methods. Elution behavior of iron(III)porphyrin complexes was investigated by reversed-phase HPLC. The optimum conditions for the separation of iron(III)porphyrin complexes were examined with respect to flow rate and mobile phase strength. These complexes were successfully separated on NOVA-PAK $C_{18}$ column using methanol / water(95/5) for $[T_pCF_3PP)Fe(R)]$ and methanol / water (98/2) for $[(P)Fe(C_6F_5)]$ as a mobile phase. It was found that these complexes were largely eluted in an acceptable range of capacity factor value ($0{\leq}logk'{\leq}1$). The dependence of the capacity factor (k') on the volume fraction of water in the binary mobile phase as well as the dependence of k' on the liquid-liquid extraction distribution ratio$(D_c)$ in methanol-water / n-pentadecane extraction system showed a good linearity. It means that the retention of iron(III)porphyrin complexes on NOVA-PAK $C_{18}$ column is largely due to the solvophobic effect. Also, there was a good linear dependence of the capacity factor(k') on the column temperature and enthalpy calculated by van't Hoff plot. From these results, it was confirmed that the retention mechanism of iron(III)porphyrin complexes in reversed-phase liquid chromatography was invariant under the condition of various temperature, and the solvophobic binding process exhibited isoequilibrium behavior.

• Safety and Health at Work
• /
• v.5 no.4
• /
• pp.222-226
• /
• 2014

Background: Focusing on the respiratory function for health effect indices, we conducted a cross-sectional study on workers who did and did not handle toner to compare the longitudinal changes. Methods: Among 116 individuals who worked for a Japanese business equipment manufacturer and participated in the study, the analysis included 69 male workers who we were able to follow up for 4 years. We categorized the 40 workers engaged in toner-handling work as the exposed group and the 29 workers not engaged in these tasks as the referent group, and compared their respiratory function test results: peak expiratory flow rate (PEFR), vital capacity (VC), predicted vital capacity (%VC), forced expiratory volume in 1 second ($FEV_1$), and forced expiratory volume in 1 second as a percent of forced vital capacity ($FEV_1%$). Results: The cross-sectional study of the respiratory function test results at the baseline and at the $5^{th}$ year showed no statistically significant differences in PEFR, VC, %VC, $FEV_1$, and $FEV_1%$ between the exposed and referent workers. Also, respiratory function time-course for 4 years was calculated and compared between the groups. No statistically significant differences were shown. Conclusion: Our study does not suggest any toner exposure effects on respiratory function. However, the number of subjects was small in our study; studies of larger populations will be desired in the future.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.11
• /
• pp.1985-1994
• /
• 2000

This research was designed to investigate the effect of initial adsorbed amount of phenol, temperature, and pH on the desorption reaction of phenol from spent activated carbon loaded with phenol. Methanol, acetone, and N,N-dimethylformamide( DMF) were used as test organic solvents. The initial adsorbed quantities of phenol investigated here were 166.1mg/g, 180.7mg/g, and 197.9mg/g. The effect of temperature was evaluated from 15 to $55^{\circ}C$ with an interval of $10^{\circ}C$, while that of pH was investigated under acidic. neutral. and alkaline conditions. The extent of phenol desorption was proportional to the strength of dipole moment such as methanol < acetone < DMF. Over 90% desorption of phenol was achieved by acetone and DMF. The quantity of des orbed phenol by the organic solvents decreases with increasing the initial adsorbed amount of phenol. DMF is affected least by the initially adsorbed amount of phenol. An increase in reaction temperature leads to higher desorption of phenol. Desorption reaction by methanol is most sensitive to the temperature. As the pH of solvents increases. the desorption rate is also increasing. At pH=12. the desorption rate of phenol by methanol increases sharply by 10%. Although methanol demonstrated the weakest desorption power. the desorption capacity of methanol would approach that of acetone and DMF by adjusting temperature and pH. Methanol may emerge as a promising solvent for removing phenol from activated carbon because of acceptable regeneration efficiency as well as relatively cheap price.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.295-303
• /
• 2015

This paper presents the study of leakage effect due to multi-cell inflater of rapid protection system to protect the possibilities of tunnel damages by flooding threats and unusual leakage to be occurred during and after subsea tunnel construction. Particularly, this protect system should be necessary in subsea tunnel. This research concentrates the physical model tests due to several multi-cell inflater to study protection capacity of leakage between the inflater and tunnel liner. A 27:1 small scale model are used in the model tests. The leakage rate, water pressure and axial displacement of inflater are measured during the model tests. According to the results, the minium leakage rate clearly shows in the case of two-cell inflater compared with in other cases. It is concluded that the results of this research will be very useful to understand the fundamental information of inflater structure design and development the technology of tunnel protection structures in the future.

• Journal of Ginseng Research
• /
• v.40 no.1
• /
• pp.38-46
• /
• 2016

Background: Blind and excessive application of fertilizers was found during the cultivation of Panax notoginseng in fields, as well as increase in root rot disease incidence. Methods: Both "3414" application and orthogonal test designs were performed at Shilin county, Yunnan province, China, for NPK (nitrogen, phosphorus, and potassium) and mineral fertilizers, respectively. The data were used to construct the one-, two-, and three-factor quadratic regression models. The effect of fertilizer deficiency on root yield loss was also analyzed to confirm the result predicted by these models. A pot culture experiment was performed to observe the incidence rate of root rot disease and to obtain the best range in which the highest yield of root and saponins could be realized. Results: The best application strategy for NPK fertilizer was $0kg/667m^2$, $17.01kg/667m^2$, and $56.87kg/667m^2$, respectively, which can produce the highest root yield of 1,861.90 g (dried root of 100 plants). For mineral fertilizers, calcium and magnesium fertilizers had a significant and positive effect on root yield and the content of four active saponins, respectively. The severity of root rot disease increased with the increase in soil moisture. The best range of soil moisture varied from 0.56 FC (field capacity of water) to 0.59 FC, when the highest yield of root and saponins could be realized as well as the lower incidence rate of root disease. Conclusion: These results indicate that the amount of nitrogen fertilizer used in these fields is excessive and that of potassium fertilizer is deficient. Higher soil moisture is an important factor that increases the severity of the root rot disease.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.9
• /
• pp.1310-1314
• /
• 2006

Sulfur-substituted $LiMn_{0.9}Cr_{0.1}O_{2-x}S_x$ $(0\;\leq\;x\;\leq\;0.1)$ layered oxides have been prepared by solid state reaction under inert atmosphere. From powder X-ray diffraction analyses, all the present lithium manganates were found to be crystallized with monoclinic-layered structure. Electrochemical measurements clearly demonstrated that, in comparison with the pristine $LiMn_{0.9}Cr_{0.1}O_2$, the sulfur-substituted derivatives exhibit smaller discharge capacities for the entire cycle range but the recovery of discharge capacity after the initial several cycles becomes faster upon sulfur substitution. The effect of the sulfur substitution on the chemical bonding nature of $LiMn_{0.9}Cr_{0.1}O_{2-x}S_x$has been investigated using X-ray absorption spectroscopic (XAS) analyses at Mn and Cr K-edges. According to Mn K-edge XAS results, the trivalent oxidation state of manganese ion remains unchanged before and after the substitution whereas the local structure around manganese ions becomes more distorted with increasing the substitution rate of sulfur. On the other hand, the replacement of oxygen with sulfur has negligible influence on the local atomic arrangement around chromium ions, which is surely due to the high octahedral stabilization energy of $Cr^{+III} $ ions. Based on the present experimental findings, we have suggested that the decrease of discharge capacity upon sulfur substitution is ascribable to the enhanced structural distortion of $MnO_6$ octahedra and/or to the formation of covalent Li-S bonds, and the accompanying improvement of cyclability would be related to the depression of Mn migration and/or to the pillaring effect of larger sulfur anion.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.116-126
• /
• 2013

Weather factor to affect driver's driving environment are due to changes in weather conditions is caused rainfall, snowfall, fog etc and the reducing of road capacity and because deteriorating weather could be affect the headway and vehicle speed and the decrease in lane caused by an accident occurs that was analyzed that bad weather occur congestion greater than on the clear day. Bad weather to reduce of the driver's visibility was analysed the sensitive to changes in travel speed and traffic accident to appears high characteristics according to weather conditions on the expressway(higher speed) than general road. As a result, visibility have been determined to be important factor in changes of the highway traffic flow characteristics. Therefore, in this study, we selected traffic volume and travle speed that have a major impact on high-speed expressway basic segments as importance effect factor and we selected to subject of analysis among the Metropolitan Expressway that it could be obtained certain level of traffic volume data and we studied the changing of expressway traffic flow due to change visibility after the collecting of meteorological and traffic data. In order to perform this study, data collection and analysis methods were established through the existing literature and we had selected level of visibility of the expressway and we had performed the statistical verification. Finally, we had calculated the rate of change of expressway traffic flow characteristics due to visibility and we had come up with a way to apply at capacity and service level analysis.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.8
• /
• pp.663-672
• /
• 2009

In this studies, the adsorption test using Chlorella pyrenoidosa was conducted to examine the effect of Pb adsorption according to various immobilized methods such as Ca-alginate, K-carrageenan, and Polyacrylamide. From the results, the duration to need to reach adsorption equilibrium was delayed according to the immobilization. And, the higher adsorption capacity of immobilized Chlorella pyrenoidosa was represented in the higher concentration of Pb, the smaller amount of immobilizing agent, and the higher pH of solution. The maximum adsorption capacity of Pb was shown in the adsorption test using Chlorella pyrenoidosa immobilized with Ca-alginate even though it was sensitive pH. The adsorption results properly represented with Freundlich isotherm equations. And, pseudo second-order chemisorption kinetic rate equation was applicable to all the biosorption data over the entire time range. The FT-IR analysis showed that the mechanism involved in biosorption of Pb by Chlorella pyrenoidosa was mainly attributed to Pb binding of carbo-acid and amide group. Adsorbed Pb on immobilized Chlorella prenoidosa was easily desorbed in the higher concentration of desorbents(NTA, HCl, EDTA, $H_2SO_4,\;Na_2CO_3$). Among the several desorbents, NTA showed the maximum desoption capacities of Pb from Chlorella pyrenoidosa immobilized with Ca-alginate and K-carrageenan and EDTA was the most effective in Chlorella pyrenoidosa immobilized with polyacrylamide. The desoprtion efficiency in the optimum condition was 90.0, 83.0, and 80.0%, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.6
• /
• pp.599-608
• /
• 2010

The effect of silica(fumed) on nitrate reduction by zero-valent iron(ZVI) was studied using batch experiment. The reduction of nitrate was tested in three different aqueous media including de-ionized water, artificial groundwater and real groundwater contaminated by nitrate. Kinetics of nitrate reduction in groundwater were faster than those in de-ionized water, and first-order rate constant($k_{obs}$) of ZVI/silica(fumed) process was about 2.5 time greater than that of ZVI process in groundwater. Amendment of Silica(fumed) also decreased ammonium presumably through adsorption on silica surface. The pHs in all processes increased due to oxidation of ZVI, but the increase was lower in groundwater due to buffering capacity of groundwater. The result also showed amount of reduced nitrate increased as initial nitrate concentration increased in groundwater. Separate adsorption isotherm experiments indicated that fumed silica itself had some degree of adsorption capacity for ammonium. The overall results indicated that silica(fumed) might be a promising material for enhancing nitrate reduction by ZVI.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.6
• /
• pp.591-596
• /
• 2000

The effect of starches such as potato, corn and wheat starch on the rheological properties of ocean jumbo squid kamaboko was investigated. Changes in the water holding capacity and color values of those kamaboko gels was also studied using the maximum gel strength endowing starch, Wheat starch could ive the better water holding capacity and breaking stress than potato or corn starch within $10{\%}$ additional level but corn starch resulted the highest those value at $20{\%}$ added. Wheat starch had higher level of breaking strain and jelly strength at $10{\%}$ then in descending order were corn starch, potato starch. But those starches were decreased after $15{\%}$ level. Texture map showed the simple rheological properties of each starches heat gel with jumbo squid kamaboko, Corn starch map showed more tough and brittle than the other. Potato starch map showed more elastic gel than corn starch. Wheat starch map could make elastic-mushy gel. There was no significant color differences of each starches but the whiteness of each starch showed increase when the starch rate was increased.