• Journal of the military operations research society of Korea
• /
• v.30 no.1
• /
• pp.153-167
• /
• 2004

This study focuses on building the wartime air operation model to evaluate the airfield capability. There are some uncertainties in the process of air operation such as mission flying time, turn around time, mission damage or kill rate, weather condition, and so on. Airplanes, on the way to the airbase after completing mission flight, may have been in queue on the holding point due to the unusable condition of airfield. And then, they may sometimes need to go other airbases due to the shortage of fuel. Under those uncertainties, this model is to evaluate the airfield capability in the wartime air operation using simulation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.624-627
• /
• 2004

Most concrete is recently made of an aggregate which is properly absorbed, and carried in it according to its capability at every fields. We have been close to demand new capability of high flowing and enduring for specific concretes. That is difficult to cope with claiming the efficiency on deterioration from lack of a high Quality aggregate. Therefore, For solving the problems we apply to method of packaged dry combined materials for concrete using dried materials. That is to say that it is a kind of making into an instant. In this study, There is a purpose to present fundamental data, comparing and analyzing a phenomenon of aggregate's absorption following the rate of adding water, for using existing materials.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.410-417
• /
• 2009

This paper represents a design and implementation of a digital controller for a multi-phase synchronous buck converter (SBC) using a digital signal processor (DSP). The multi-phase SBC has generally been used for a voltage regulation module (VRM) of a microprocessor because of its high current handling capability at a low output voltage. The VRM requires high control performance of tight output regulation, high slew rate, and load sharing capability of multiple converters. In order to achieve these requirements, the design and implementation of a digital control system for a multi-phase SBC are presented in this paper. The digital PWM generation, current sensing, and voltage and current controller using a DSP TMS320F2812 are considered. The experimental results are provided to show the validity of the implemented digital control system.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.735-738
• /
• 2005

Most concrete is recently made of an aggregate which is properly absorbed, and carried in it in order to do capability at every fields. We have been close to demand new capability of high flowing and enduring for specific concretes. That is difficult to cope with claiming the efficiency on deterioration from lack of a high quality aggregate. Therefore, For solving the problems we apply to a packing method for using dried materials. That is to say it is a kind of making into an instant. In this study, There is a purpose to present fundamental data, comparing and analyzing a phenomenon about aggregate's absorption following the rate of adding water, for using existing materials.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.493-496
• /
• 2003

Most concrete is recently made of an aggregate which is properly absorbed, and carried in it in order to do capability at every fields. We have been close to demand new capability of high flowing and enduring for specific concretes. That is difficult to cope with claiming the efficiency on deterioration from lack of a high quality aggregate. Therefore, for solving the problems we apply to a packing method for using dried materials. That is to say it is a kind of making into an instant. In this study, There is a purpose to present fundamental data, comparing and analyzing a phenomenon about aggregate absorption following the rate of adding water, for using existing materials.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.5
• /
• pp.42-48
• /
• 2008

In this paper, we have introduced a Code Division Multiplexing transmission method which is similar to OFDM and analyze ECCM performances. We have verified CDM transmission method has a good LPI performance and a feasible ECCM performance. This capability could be useful for reduction of RF interference which occurs when many equipments operate densely in small area. The equipment that uses CDM transmission method supports variable transmission rate and order-wire effectively and conveniently to user. This CDM method has similar ECCM performance comparing to serial DS method. CDM method has good multi-path signal processing capability and could be useful for mobile communication environment.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.1
• /
• pp.24-31
• /
• 2001

Most of the natural calamities occurred in South Korea are due to rainfall, which are occurred during rainy season, June to September. The life-calamity reported in those seasons were over 75%, and the dead rate by the rainfall was about 98%. Especially, the disasters occurred in Pusan and Kyongsang-Namdo were highest of the whole country. The capability of landslide in this area was very high, which is included to Class 3 or Class 4 of disastrous risk grade suggested by the GIS system(Lee Su-Gon,1999). Those are based on the characteristics of topographical and meteorological data. In this study, the rainfall characteristics in Pusan were analyzed through the relationship between the cumulative rainfall and the maximum hourly rainfall. The landslide in this area depends on the elapsed time after maximum hourly rainfall intensity, and the most of landslide in Pusan recorded during within 3 hours after pick-time of rainfall intensity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.769-774
• /
• 2003

Most concrete is recently made of an aggregate which is properly absorbed, and carried in it in order to do capability at every fields. We have been close to demand new capability of high flowing and enduring for specific concretes. That is difficult to cope with claiming the efficiency on deterioration from lack of a high quality aggregate. Therefore, For solving the problems we apply to a packing method for using dried materials. That is to say it is a kind of making into an instant. In this study, There is a purpose to present fundamental data, comparing and analyzing a phenomenon about aggregate's absorption following the rate of adding water, for using existing materials.

• Journal of the military operations research society of Korea
• /
• v.28 no.1
• /
• pp.29-46
• /
• 2002

This study focuses primarily on the construction of the wartime sealift operation model from US to Korea. There are some uncertainties in the process of sealift operation such as the procurement rate of materiel in US, the distribution of KFS on four initial position locations at the start of the activation, and the number of ports and berths in the SPOES and SPODS. The sealift capability, based on the allocation of sealift assets such as the number of vessels, berths, and ports, is evaluated through simulation. The simulation is executed with a baseline wartime scenario and then the results are analyzed through a sensitivity analysis. The military planner may use of this model as a standard for establishing effective and concrete sealift operation plan in the near future.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.153-156
• /
• 2004

Most concrete is recently made of an aggregate which is properly absorbed. and carried in it in order to do capability at every fields. We have been close to demand new capability of high flowing and enduring for specific concretes. That is difficult to cope with claiming the efficiency on deterioration from lack of a high quality aggregate. Therefore. For solving the problems we apply to a packing method for using dried materials. That is to say it is a kind of making into an instant. In this study. There is a purpose to present fundamental data. comparing and analyzing a phenomenon about aggregate's absorption following the rate of adding water. for using existing materials.