• Title/Summary/Keyword: raspberry

Search Result 566, Processing Time 0.022 seconds

Analysis of Floating Population in Schools Using Open Source Hardware and Deep Learning-Based Object Detection Algorithm (오픈소스 하드웨어와 딥러닝 기반 객체 탐지 알고리즘을 활용한 교내 유동인구 분석)

  • Kim, Bo-Ram;Im, Yun-Gyo;Shin, Sil;Lee, Jin-Hyeok;Chu, Sung-Won;Kim, Na-Kyeong;Park, Mi-So;Yoon, Hong-Joo
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.17 no.1
    • /
    • pp.91-98
    • /
    • 2022
  • In this study, Pukyong National University's floating population survey and analysis were conducted using Raspberry Pie, an open source hardware, and object detection algorithms based on deep learning technology. After collecting images using Raspberry Pie, the person detection of the collected images using YOLO3's IMAGEAI and YOLOv5 models was performed, and Haar-like features and HOG models were used for accuracy comparison analysis. As a result of the analysis, the smallest floating population was observed due to the school anniversary. In general, the floating population at the entrance was larger than the floating population at the exit, and both the entrance and exit were found to be greatly affected by the school's anniversary and events.

Appraisal method for Determining Whether to Upgrade Software for Appraisal (감정 대상 소프트웨어의 업그레이드 여부 판정을 위한 감정 방법)

  • Chun, Byung-Tae;Jeong, Younseo
    • Journal of Software Assessment and Valuation
    • /
    • v.16 no.1
    • /
    • pp.13-19
    • /
    • 2020
  • It can be seen that the infringement of copyright cases is increasing as the society becomes more complex and advanced. During the software copyright dispute, there may be a dispute over whether the software is duplicated and made into upgraded software. In this paper, we intend to propose an analysis method for determining whether to upgrade software. For the software upgrade analysis, a software similarity analysis technique was used. The analysis program covers servers, management programs, and Raspberry PC programs. The first analysis confirms the correspondence between program creation information and content. In addition, it analyzes the similarity of functions and screen composition between the submitted program and the program installed in the field. The second comparative analysis compares and analyzes similarities by operating two programs in the same environment. As a result of comparative analysis, it was confirmed that the operation and configuration screens of the two programs were identical. Thus, minor differences were found in a few files, but it was confirmed that the two programs were mostly made using the same or almost similar source code. Therefore, this program can be judged as an upgrade program.

Development and Application of Visiting Physical-Computing Experience in an Education Program

  • Lee, Eun-Sang
    • Journal of the Korea Society of Computer and Information
    • /
    • v.27 no.9
    • /
    • pp.279-286
    • /
    • 2022
  • The purpose of this study is to present a case of the development and application of a one-time special lecture program that requires the use of computers in frontline elementary and secondary schools. For this purpose, the researcher developed an Arduino-based special lecture program that works as a teaching tool to help with the functions of a student PC with a Raspberry Pi. This special lecture program was applied at three elementary and middle schools near K-University, and then the program was evaluated. The results of this study are as follows. First, the researcher developed a teaching aid for PC functions to be used in special lectures. Second, teaching and learning materials for visiting special lecture education programs using Arduino were developed. Third, in the special lecture, a teaching-learning method was used to guide a small number of students individually. Fourth, the special lecture program resulted in high satisfaction. The results of this study can be a useful reference for teachers who plan one-time special lecture programs requiring computers or for those who want to apply physical computing-related devices in an educational field.

A Study on Backend as a Service for the Internet of Things (사물인터넷을 위한 백앤드 서비스에 관한 연구)

  • Choi, Shin-Hyeong
    • Advanced Industrial SCIence
    • /
    • v.1 no.1
    • /
    • pp.23-31
    • /
    • 2022
  • Cloud services, which started in the early 2000s as a method of using idle servers, are more active with the advent of the 4th industrial revolution, and are being used in many fields as an optimal platform that can be used for business by collecting and analyzing data. On the other hand, the Internet of Things is an environment in which all surrounding objects can freely connect to the Internet network anytime and anywhere to transmit sensed data. In the Internet of Things, data is transmitted in real time, so BaaS, that is, a cloud service for data only has been added. In this paper, among BaaS services for the Internet of Things, a back-end service method that manages data based on Parse Server is explained, and a service that helps patients in rehabilitation is presented using this. For this, a Raspberry Pi is used as a hardware environment, and it is connected to the Internet, collects patient movement information in real time, and manages it through the Parse Server.

Development of Intelligent CCTV System Using CNN Technology (CNN 기술을 사용한 지능형 CCTV 개발)

  • Do-Eun Kim;Hee-Jin Kong;Ji-Hu Woo;Jae-Moon Lee;Kitae Hwang;Inhwan Jung
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.23 no.4
    • /
    • pp.99-105
    • /
    • 2023
  • In this paper, an intelligent CCTV was designed and experimentally developed by using an IOT device, Raspberry Pi, and artificial intelligence technology. Object Detection technology was used to detect the number of people on the CCTV screen, and Action Detection technology provided by OpenPose was used to detect emergency situations. The proposed system has a structure of CCTV, server and client. CCTV uses Raspberry Pi and USB camera, server uses Linux, and client uses iPhone. Communication between each subsystem was implemented using the MQTT protocol. The system developed as a prototype could transmit images at 2.7 frames per second and detect emergencies from images at 0.2 frames per second.

Real-time EKF-based SOC estimation using an embedded board for Li-ion batteries (임베디드 보드를 사용한 EKF 기반 실시간 배터리 SOC 추정)

  • Lee, Hyuna;Hong, Seonri;Kang, Moses;Sin, Danbi;Beak, Jongbok
    • Journal of IKEEE
    • /
    • v.26 no.1
    • /
    • pp.10-18
    • /
    • 2022
  • Accurate SOC estimation is an important indicator of battery operation strategies, and many studies have been conducted. The simulation method which was mainly used in previous studies, is difficult to conduct real-time SOC estimation like real BMS environment. Therefore, this paper aims to implement a real-time battery SOC estimation embedded system and analyze problems that can arise during the verification process. In environment consisting of two Raspberry Pi boards, SOC estimation with the EKF uses data measured by the Simscape battery model. Considering that the operating characteristics of the battery vary depend on the temperature, the results were analyzed at various ambient temperatures. It was confirmed that accurate SOC estimation was performed even when offset fault and packet loss occurred due to communication or sensing problems. This paper proposes a guide for embedded system strategies that enable real-time SOC estimation with errors within 5%.

Development of an IoT Smart Home System Using BLE (BLE통신을 이용한 IoT 스마트홈 모니터링 시스템 개발)

  • Duong, Cong Tan;Kim, Myung Kyun
    • Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
    • /
    • v.8 no.6
    • /
    • pp.909-917
    • /
    • 2018
  • Recently, the Internet of Thing (IoT) technology is expanding explosively in the number of devices and applications in many application areas. In IoT systems, sensors and actuators are connected to the Internet and cooperate to do some applications by exchanging information. In this paper an IoT smart home system is developed to monitor and control home devices easily. Our system consists of sensor devices, IoT gateways, and an IoT server. Sensor devices developed using Rfduino sense the physical world and transmit their data using BLE to the IoT server thru the IoT gateway. We implemented the IoT gateway using Raspberry Pi and the IoT server using ARTIK cloud. We installed our system and made a test in our lab, which showed that our system can be installed and managed easily and extended its functionality in an easy way. By taking advantage of the rule mechanism and action messages of ARTIK cloud, we implemented the control of device parameters easily by sending action messages to the ARTIK cloud.

Design and Implementation of Convenience System Based on IoT (IoT를 기반한 편의 시스템 설계 및 구현)

  • Ui-Do Kim;Seung-Jin Yu;Jae-Won Lee;Seok-Tae Cho;Jae-Wook Kim
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.19 no.1
    • /
    • pp.165-172
    • /
    • 2024
  • In this paper, we designed a smart home system that can be used intuitively and easily in everyday life, such as sending text messages to users, providing various information and scheduling using smart AI, and providing lighting and atmosphere suitable for the atmosphere in situations such as listening to music using neopixels, as well as using ESP32, RFID, and Google Cloude Console using raspberry pie. As a result of the experiment, it was confirmed that security characters were normally sent to users when RFID was recognized on ESP32 connected to Wi-Fi even if the power was reconnected, and smart AI using Neopixel lighting, Raspberry Pie, and voice recognition, which calculated frequency, also changed the recognition rate over distance, but it worked.

CNN Based Human Activity Recognition System Using MIMO FMCW Radar (다중 입출력 FMCW 레이다를 활용한 합성곱 신경망 기반 사람 동작 인식 시스템)

  • Joon-sung Kim;Jae-yong Sim;Su-lim Jang;Seung-chan Lim;Yunho Jung
    • Journal of Advanced Navigation Technology
    • /
    • v.28 no.4
    • /
    • pp.428-435
    • /
    • 2024
  • In this paper, a human activity regeneration (HAR) system based on multiple input multiple output frequency modulation continuous wave (MIMO FMCW) radar was designed and implemented. Using point cloud data from MIMO radar sensors has advantages in terms of privacy, safety, and accuracy. For the implementation of the HAR system, a customized neural network based on PointPillars and depthwise separate convolutional neural network (DS-CNN) was developed. By processing high-resolution point cloud data through a lightweight network, high accuracy and efficiency were achieved. As a result, the accuracy of 98.27% and the computational complexity of 11.27M multiply-accumulates (Macs) were achieved. In addition, the developed neural network model was implemented on Raspberry-Pi embedded system and it was confirmed that point cloud data can be processed at a speed of up to 8 fps.

Chemical Composition, Functional Constituents, and Antioxidant Activities of Berry Fruits Produced in Korea (국내 재배 베리류의 화학 조성 및 기능성 성분과 항산화 활성)

  • Lee, Yongcheol;Lee, Jib-Ho;Kim, Sung-Dan;Chang, Min-Su;Jo, In-Soon;Kim, Si-Jeong;Hwang, Keum Taek;Jo, Han-Bin;Kim, Jung-Hun
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.44 no.9
    • /
    • pp.1295-1303
    • /
    • 2015
  • Berry fruits are rich in phytochemicals, including polyphenols, anthocyanins, phenolic acids, and organic acids, which are known to have beneficial effects on health. The aim of this study was to investigate chemical composition, functional constituents, and antioxidant activities of mulberry, black raspberry, raspberry, and blueberry cultivated in Korea. Acidity of the four berries ranged from 0.26% to 1.10%, and pH ranged from 3.3 to 5.2. Total mineral contents of the four berries ranged from 92.9 to 256.0 mg/100 g. Among the berries, mulberry contained the most abundant total free sugars, and glucose and fructose were the major sugars in the berries. Mulberry contained more than three times as much ${\gamma}-aminobutyric$ acid as the content of the other berries. Blueberry contained more free phenolic acid than the other berries. Especially, chlorogenic acids were the major free phenolic acids in blueberry. Black raspberry had the highest amount of polyphenols, anthocyanins, and flavonoids among the berries and showed the highest antioxidant activity.