• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.10
• /
• pp.391-398
• /
• 2021

Since the leased line is a structure that exclusively uses two connected areas for data transmission, a stable quality level and security are ensured, and despite the rapid increase in the number of switched lines, it is a line method that is continuously used a lot in companies. However, because the cost is relatively high, one of the important roles of the network operator in the enterprise is to maintain the optimal state by properly arranging and utilizing the resources of the network leased line. In other words, in order to properly support business service requirements, it is essential to properly manage bandwidth resources of leased lines from the viewpoint of data transmission, and properly predicting and managing leased line usage becomes a key factor. Therefore, in this study, various prediction models were applied and performance was evaluated based on the actual usage rate data of leased lines used in corporate networks. In general, the performance of each prediction was measured and compared by applying the smoothing model and ARIMA model, which are widely used as statistical methods, and the representative models of deep learning based on artificial neural networks, which are being studied a lot these days. In addition, based on the experimental results, we proposed the items to be considered in order for each model to achieve good performance for prediction from the viewpoint of effective operation of leased line resources.

• Smart Media Journal
• /
• v.10 no.3
• /
• pp.31-38
• /
• 2021

It is hard to predict when and where a fall accident will happen. Also, if rapid follow-up measures on it are not performed, a fall accident leads to a threat of life, so studies that can automatically detect a fall accident have become necessary. Among automatic fall-accident detection techniques, a fall detection scheme using an IMU (inertial measurement unit) sensor attached to a wrist is difficult to detect a fall accident due to its movement, but it is recognized as a technique that is easy to wear and has excellent accessibility. To overcome the difficulty in obtaining fall data, this study proposes an algorithm that efficiently learns less data through machine learning such as KNN (k-nearest neighbors) and SVM (support vector machine). In addition, to improve the performance of these mathematical classifiers, this study utilized feature data aquired in the frequency space. The proposed algorithm analyzed the effect by diversifying the parameters of the model and the parameters of the frequency feature extractor through experiments using standard datasets. The proposed algorithm could adequately cope with a realistic problem that fall data are difficult to obtain. Because it is lighter than other classifiers, this algorithm was also easy to implement in small embedded systems where SIMD (single instruction multiple data) processing devices were difficult to mount.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_3
• /
• pp.1389-1403
• /
• 2021

Disaster management using VHR (very high resolution) satellite images supports rapid damage assessment and also offers detailed information of the damages. However, the acquisition of pre-event VHR satellite images is usually limited due to the long revisit time of VHR satellites. The absence of the pre-event data can reduce the accuracy of damage assessment since it is difficult to distinguish the changed region from the unchanged region with only post-event data. To address this limitation, in this study, we conducted the wildfire-induced change detection on national wildfire cases using post-fire VHR satellite images and GIS (Geographic Information System) data. For GIS data, a national land cover map was selected to simulate the pre-fire NIR (near-infrared) images using the spatial information of the pre-fire land cover. Then, the simulated pre-fire NIR images were used to analyze bi-temporal NDVI (Normalized Difference Vegetation Index) correlation for unsupervised change detection. The whole process of change detection was performed on a superpixel basis considering the advantages of superpixels being able to reduce the complexity of the image processing while preserving the details of the VHR images. The proposed method was validated on the 2019 Gangwon wildfire cases and showed a high overall accuracy over 98% and a high F1-score over 0.97 for both study sites.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.7
• /
• pp.199-204
• /
• 2021

Digital substation refers to a substation that digitizes functions and communication methods of power facilities such as monitoring, measuring, control, protection, and operation based on IEC 61850, an international standard for the purpose of intelligent power grids. Based on the intelligent operating system, efficient monitoring and control of power facilities is possible, and automatic recovery function and remote control are possible in the event of an accident, enabling rapid power failure recovery. With the development of digital technology and the expansion of the introduction of eco-friendly renewable energy and electric vehicles, the spread of direct current distribution systems is expected to expand. MVDC is a system that utilizes direct current lines with voltage levels and transmission capacities between HVDCs applied to conventional transmission systems and LVDCs from consumers. Converting existing lines in substations, where most power equipment is alternating current centric, to direct current lines will reduce transmission losses and ensure greater current capacity. The process bus of a digital substation is a communication network consisting of communication equipment such as Ethernet switches that connect installed devices between bay level and process level. For MVDC linkage to existing digital substations, the process level was divided into two buses: AC and DC, and a system that can be comprehensively managed in conjunction with diagnostic IEDs as well as surveillance and control was proposed.

• Journal of Ginseng Culture
• /
• v.1
• /
• pp.57-66
• /
• 2019

Ginseng has been recognized as a lifespan extending medicine which has been regarded as one of the medicines classified as top medicines, as the Boncho (medical herbs) study which is influenced by the idea of guidance's costume and food concept mainly in China is gaining its bona fide form. As the demand for ginseng has been expanded to other levels, the demand for ginseng has been increasing. Ginseng from the nature reached its supply chain limit due to its extinction and difficulty of picking, so it translated into ginseng cultivation of economy rather than harvesting in nature. After the start of ginseng cultivation, the ginseng cultivation was further enhanced by the rapid development of processing methods such as white-ginseng and red-ginseng, and the surge of consumption due to the traditional belief in ginseng drug efficacy and support of scientific research. In the Joseon Dynasty, the name Gasam (cultivated ginseng) had been created as ginseng was cultivated on farmland after the stage of SanYang (wild cultivated ginseng), the purpose of the new name Gasam is to differentiate from natural ginseng, and natural ginseng lost its firm position as the genuine ginseng as the Gasam replaced the genuine ginseng, and the natural ginseng got a new name of SanSam (wild ginseng). Because the real ginseng substance concept dissipated, and as Gasam is being called ginseng, the name Gasam was also disappeared. As a result, it was possible to grow large quantities according to the arrival of the Gasam era, and it was possible to supply the demand for ginseng, and it could become one agricultural industry. In this ginseng cultivation, in Japan where ginseng did not grow naturally, it was difficult to obtain ginseng from Joseon and faced with a shortage of ginseng at all times. Therefore, the shogun cultivated the Gasam systematically at the national level by the inside of the shogunate. However, since the natural ginseng is native to China and Korea, there is a concern about the deterioration of the quality of natural ginseng due to the incorporation of cultivated ginseng (Gasam). To protect the interests, the cultivation of ginseng was subject to control. For this reason, the lack of historical information on Gasam cultivation, which had to be started secretly, would be a natural result. In this paper, althouh not sufficient enough, the historical informations were used to summarize the history of ginseng cultivation in China, Japan and Korea.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.565-572
• /
• 2018

Recently, UAVs (Unmanned Aerial Vehicles) or drones have gained popularity for the engineering surveying and mapping because they enable the rapid data acquisition and processing as well as their operation cost is low. The applicable fields become much wider including the topographic monitoring, agriculture, and forestry. It is reported that the high geospatial accuracy is achievable with the drone photogrammetry for many applications. However most studies reported the best achievable mapping results using well-distributed ground control points though some studies investigated the impact of control points on the accuracy. In this study, we focused on the drone mapping of corridors such as roads and pipelines. The distribution and the number of control points along the corridor were diversified for the accuracy assessment. In addition, the effects of the camera self-calibration and the number of the image strips were also studied. The experimental results showed that the biased distribution of ground control points has more negative impact on the accuracy compared to the density of points. The prior camera calibration was favored than the on-the-fly self-calibration that may produce poor positional accuracy for the case of less or biased control points. In addition, increasing the number of strips along the corridor was not helpful to increase the positional accuracy.

• Resources Recycling
• /
• v.27 no.6
• /
• pp.23-29
• /
• 2018

Recently rapid economic growth and technological development have led to an increase in the generation of waste electrical and electronic equipment (WEEE). As the amount of electric and electronic waste generated increases, the importance of processing waste printed circuit boards (PCB) is also increasing. Various studies have been conducted to recycle various valuable metals contained in a waste PCB in an environmentally friendly and economical manner. To get anode slime containing Ag and Au, Anode copper prepared from PCB scraps was used by means of electro-refining. Ag and Au recovery was conducted by leaching, direct reduction, and ion exchange method. In the case of silver, the anode slime was leached at 3 M $HNO_3$, 100 g/L, $70^{\circ}C$, and Ag was recovered by precipitation, alkali dissolution, and reduction method. In the case of gold, the nitrate leaching residues of the anode slime was leached at 25% aqua regia, 200 g/L, $70^{\circ}C$, and Au was recovered by pH adjustment, ion exchange resin adsorption, desorption and reduction method. The purity of the obtained Au and Ag were confirmed to be 99.99%.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.10
• /
• pp.285-290
• /
• 2021

In the medical field, disease diagnosis and prediction research using artificial intelligence technology is being actively conducted. It is being released as a variety of products for disease diagnosis and prediction, which are most widely used in the application of artificial intelligence technology based on medical images. Artificial intelligence is being applied to diagnose diseases, to classify diseases into benign and malignant, and to separate disease regions for use in identification or reading according to the risk of disease. Recently, in connection with cloud technology, its utility as a service product is increasing. Among the diseases dealt with in this paper, liver disease is a disease with very high risk because it is difficult to diagnose early due to the lack of pain. Artificial intelligence technology was introduced based on medical images as a non-invasive diagnostic method for diagnosing these diseases. We describe the development of a web service to help the most meaningful clinical reading of liver cirrhosis patients. Then, it shows the web service process and shows the operation screen of each process and the final result screen. It is expected that the proposed service will be able to diagnose liver cirrhosis at an early stage and help patients recover through rapid treatment.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.12
• /
• pp.155-163
• /
• 2020

This study developed a system that can collect, manage, and utilize the travel routes of individuals who tested positive for coronavirus disease 2019 (COVID-19) based on the data standardization and quality management principles and presented the analysis data collected from the existing system. Unlike many other countries in the world, Korea demonstrated a rapid response by conducting epidemiological investigations. Further, the local governments have actively shared the travel routes of individuals who tested positive for COVID-19 to facilitate proactive prevention of the infectious disease per the Infectious Disease Control and Prevention Law. However, currently, there is no standard protocol for the local governments to share the information, thus complicating the process of sharing, managing, and utilizing the collected data. Therefore, this study developed a system that can facilitate sharing of the travel routes of individuals who tested positive for COVID-19 by establishing database construction procedures and using the travel route of COVID-19 patients as per the Disaster & Safety Information Sharing Platform and developing a data processing guideline, a data entry system with default templates, and Open API. Although this sharing system was designed to communicate the travel routes of COVID-19 patients, it can also be utilized in case of other infectious diseases. Therefore, it can be used as a response strategy for future outbreaks of infectious diseases.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.7
• /
• pp.217-224
• /
• 2022

Today, with the development of technology and industry, fire accidents in special buildings are increasing as special buildings increase. However, despite the rapid development of information and communication technology, human casualties are steadily occurring due to the underdeveloped and ineffective indoor fire alarm system. In this study, we confirmed that the existing indoor fire alarm system using acoustic alarm could not deliver a sufficiently large alarm to the in-room personnel. To improve this, we designed and implemented a fire alarm system using edge computing and beacons. The proposed improved fire alarm system consists of terminal sensor nodes, edge nodes, a user application, and a server. The terminal sensor nodes collect indoor environment data and send it to the edge node, and the edge node monitors whether a fire occurs through the transmitted sensor value. In addition, the edge node continuously generate beacon signals to collect information of smart devices with user applications installed within the signal range, store them in a server database, and send application push-type fire alarms to all in-room personnel based on the collected user information. As a result of conducting a signal valid range measurement experiment in a university building with dense lecture rooms, it was confirmed that device information was normally collected within the beacon signal range of the edge node and a fire alarm was quickly sent to specific users. Through this, it was confirmed that the "blind spot problem of the alarm" was solved by flexibly collecting information of visitors that changes time to time and sending the alarm to a smart device very adjacent to the people. In addition, through the analysis of the experimental results, a plan to effectively apply the proposed fire alarm system according to the characteristics of the indoor space was proposed.