• Steel and Composite Structures
• /
• 제37권3호
• /
• pp.291-306
• /
• 2020

The noise from the elevated lines of rail transit has become a growing problem. This paper presents a new method for the rapid prediction of the structure-borne noise from steel or composite bridges, based on the receptance and Statistical Energy Analysis (SEA), which is essential to the study of the generation mechanism and the design of a low-noise bridge. First, the vertical track-bridge coupled vibration equations in the frequency domain are constructed by simplifying the rail and the bridge as an infinite Timoshenko beam and a finite Euler-Bernoulli beam respectively. Second, all wheel/rail forces acting upon the track are computed by taking a moving wheel-rail roughness spectrum as the excitation to the train-track-bridge system. The displacements of rail and bridge are obtained by substituting wheel/rail forces into the track-bridge coupled vibration equations, and all spring forces on the bridge are calculated by multiplying the stiffness by the deformation of each spring. Then, the input power to the bridge in the SEA model is derived from spring forces and the bridge receptance. The vibration response of the bridge is derived from the solution to the power balance equations of the bridge, and then the structure-borne noise from the bridge is obtained. Finally, a tri-span continuous steel-concrete composite bridge is taken as a numerical example, and the theoretical calculations in terms of the vibration and noise induced by a passing train agree well with the field measurements, verifying the method. The influence of various factors on wheel/rail and spring forces is investigated to simplify the train-track-bridge interaction calculation for predicting the vibration and noise from steel or composite bridges.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.3055-3060
• /
• 2012

A simple, rapid and sensitive spectrofluorometric method was developed for the determination of folic acid (FA), based on its quenching effect on the fluorescence intensity of enoxacin (ENX)-europium ($Eu^{3+}$) complex as a fluorescent probe. Fluorometric interaction between ENX-$Eu^{3+}$ complex and FA was studied using UV-visible and fluorescence spectroscopy. The quenched fluorescence intensity at an emission wavelength of 614 nm was proportional to the concentration of FA. Optimum conditions for the determination of FA were investigated. Under optimal conditions, the reduced fluorescence intensity at 614 nm was responded linearly with the concentration of FA. The linearity was maintained in the range of $1.25{\times}10^{-9}$ to $1.50{\times}10^{-7}$ M (R = 0.9986) with the limit of detection ($3S_b/m$) (where $S_b$ is the standard deviation of blank and m is the slop of linear calibration curve) of $6.94{\times}10^{-10}$ M. The relative standard deviation (RSD) for 9 repeated measurements of $1.0{\times}10^{-9}$ M FA was 1.42%. This method was simple, cost effective, and relatively free of interference from coexisting substances. Successful determinations of FA in pharmaceutical formulation and biological samples with the developed method were demonstrated.

• 전자공학회논문지T
• /
• 제36T권1호
• /
• pp.19-24
• /
• 1999

In\sub 2\O\sub 3\ 계 산화물 반도체형 후막센서의 ppb 범위의 오존에 대한 감지특성을 살펴보았다. In\sub 2\O\sub 감지막은 오존에 감도가 상당히 높았지만 안정된 신호를 얻을 수 없었다. In\sub 2\O\sub에 3wt.% 의 Fe\sub 2\O\sub 3\를 첨가한 경우에는, 순수한 In\sub 2\O\sub 와 비교할 때 응답 시간과 감도에 있어서 감지 특성의 향상이 관찰되었지만, 센서 신호가 시간에 따라 계속 증가되는 경향은 크게 개선되지 않았다. 그러나 In\sub 2\O\sub:Fe\sub 2\O\sub 3\ 혼합 분말의 열처리는 감도가 감소하기는 하였지만 센서의 오존 응답 및 회복 특성을 증진시켰다. 특히 1300℃ 정도의 고온에서 혼합 분말을 열처리 하여 제조한 감지막은 감도의 감소는 있었지만 550℃ 의 측정 온도에서 빠른 응답 및 회복 특성과 센서 신호가 최대값으로 빠르게 수렴함을 확인할 수 있었다. 또한 이들 센서는 오존에 대해 센서 신호의 선형적인 농도 의존성을 나타내었으며, 반복 실험을 행할 때 센서 신호의 재현성을 보여주었다. 따라서 본 연구에서 제조한 후 막 가스센서를 사용하여 ppb 범위의 오존 농도를 신뢰성있게 측정할 수 있음을 확인할 수 있었다.

• 마이크로전자및패키징학회지
• /
• 제10권4호
• /
• pp.29-33
• /
• 2003

n-형 탄화규소 반도체에 대한 구리금속을 이용하여 오옴성 접촉 구조를 제작하였다. 제작된 구리접촉에 대해 후속열처리 조건과 금속접촉 구조에 따른 재료적, 전기적 성질의 변화를 조사하였다. 금속접촉의 오옴성 성질은 금속박막의 구조 뿐 아니라 열처리조건에 대해서도 크게 좌우됨을 알 수 있었다. 열처리는 급속열처리 장치를 이용한 진공상태 및 환원 분위기에서 2단계 열처리방식을 통하여 시행하였다. 접촉비저항의 측정을 위해 TLM 구조를 만들었으며 면저항 ($R_{s}$), 접합저항 ($R_{c}$), 이동거리 ($L_{T}$), 패드간거리 (d), 전체저항 ($R_{T}$) 값을 구하여 알려진 계산식에 의해 접촉비저항 ($p_{c}$) 값을 추정하였다. 진공보다 환원분위기에서 후속 열처리를 수행한 시편이 양호한 전기적 성질을 가짐을 알 수 있었다. 가장 양호한 결과는 Cu/Si/Cu 구조를 가진 금속접촉 결과이었으며 접촉비저항 ($p_{c}$)은 $1.2\times 10^{-6} \Omega \textrm{cm}^2$의 낮은 값을 얻을 수 있었다. 재료적 성질은 XRD를 이용하여 분석하였고 SiC 계면 상에 구리와 실리콘이 결합한 구리 실리사이드가 형성됨을 알 수 있었다.

• 한국멀티미디어학회논문지
• /
• 제20권8호
• /
• pp.1447-1455
• /
• 2017

In a trawl-net simulation, it is very important to process the physical phenomenons resulting from real collisions between a net and fishes. However, because it is very difficult to reconstruct the surface with mass points, many researchers have generally detect the collision using an approximation model employing a sphere, a cube or a cylinder. These approaches occur often result in inaccurate movements of a fish due to the difference between a real-net and a designed-net. So, many systems have manually adjusted a net surface based on actual measurements of mass points. These methods are very inefficient because it needs much times in an adjustment and also causes more incorrect inputs according to a rapid increment in the number of points. Therefore, in this paper, we propose a reconstruction method that it semi-automatically reconstructed trawl-net surfaces using the equation of motion at each mass point in a mass-spring model. To get an easy start in a beginning step of the spread, it enables users to get interactive adjustment on each mass point. We had designed a trawl-net model using geometrical structures of trawl-net and then automatically reconstructed the trawl-net surface using scale-space meshing techniques. Last, we improve the accuracy of reconstructed result by correction user interaction.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.193.2-193.2
• /
• 2016

We evaluate the change in defects in the oxidized SiO2 grown on 4H-SiC (0001) by plasma assisted oxidation, by comparing with that of conventional thermal oxide. In order to investigate the changes in the electronic structure and electrical characteristics of the interfacial reaction between the thin SiO2 and SiC, x-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), DFT calculation and electrical measurements were carried out. We observed that the direct plasma oxide grown at the room temperature and rapid processing time (300 s) has enhanced electrical characteristics (frequency dispersion, hysteresis and interface trap density) than conventional thermal oxide and suppressed interfacial defect state. The decrease in defect state in conduction band edge and stress-induced leakage current (SILC) clearly indicate that plasma oxidation process improves SiO2 quality due to the reduced transition layer and energetically most stable interfacial state between SiO2/SiC controlled by the interstitial C.

• 한국의상디자인학회지
• /
• 제11권2호
• /
• pp.75-84
• /
• 2009

The following research analyzed the sewing teaching of the tailored jacket shown in fashion textbooks, which are currently used in universities and educational organizations in the fashion industry. To analyze the sewing teaching of tailored jackets, we analyzed 35 textbooks in the market. Among them we used 14 textbooks which dealt with the patter formation method of tailored jackets, and cutting and sewing methods. First, the stitching direction and the location of attachment varied. The type of sticking tape and its position also differed, emphasizing the need to make an institutionalized education material which is based on the characteristic of the fabric and its silhouette. Second, controlling the ease length of the right side sewing princess line, or information about the shoulder line and sleeve line of the notch as not specifically shown in the textbooks. Furthermore, not many textbooks showed how to pull the lower part of the texture out of sight, nor did they explain why this needed to be done. Third, the lining is usually slightly larger than the outer texture of the clothing, as the lining is usually tugged in the sewing process, and this method makes the clothes more comfortable. The method of sewing the princessline $0.2{\sim}0.3cm$ outside the outer pattern was the most recommended. The center-back side was usually 2cm in activity measurements, but it turned out that a textbook which required ease treatment on the shoulder line did not do so on the lining material. The textbooks used in this research dealt only with how to manufacture a tailored jacket without full explanation about textures which could influence the manufacturing. The production method and process differed between different textbooks, showing the need to make a institutionalized education material. In a quickly-changing era where there is rapid change in the dressmaking procedure, we need to help students understand the process more easily through a formalized education process.

• Journal of Nutrition and Health
• /
• 제35권2호
• /
• pp.213-222
• /
• 2002

The alkaline comet assay has been used with increasing popularity to investigate the level of DNA damage in biomonitoring studies within the last decade in Western countries. The purpose of this study was to evaluate the usefulness of the alkaline comet assay as a biomarker of oxidative DNA damage for monitoring in the Korean population, and also to evaluate the effect of nutritional status and lifestyle factors on H2O2 induced oxidative DNA damage measured by the alkaline comet assay in human lymphocytes. The study population consisted of 61 healthy Korean male volunteers, aged 20-28. Epidemiological background data including dietary habits, smoking habits and anthropometrical measurements were collected through personal interviews. After blood collection, the comet assay in peripheral lymphocytes and plasma lipids analysis was carried out and the results analyzed. Tail moment (TM) and tail length (TL) of the comet assay were use\ulcorner to measure DNA damage in the lymphocytes of the subjects. Statistically significant (p < 0.05) positive correlations were observed between DNA damage (TM or TL) and smoking habits expressed as cigarettes smoked per day and pack years (r = 0.311 and 0.382 for TM, r = 0.294 and 0.350 for TL, respectively). There were also significant positive correlations between DNA damage parameter and waist-hip ratio. Higher plasma triglyceride levels were associated with increased damage to DNA. There were no correlations between the consumption frequencies of vegetables and DNA damage to the subjects. However, consumption frequencies of fruit and fruit juice intake were inversely associated with the TM and TL. The results indicate that die comet assay is a simple, rapid and sensitive method for detecting lymphocyte DNA damage induced by cigarette smoking. Consumption of fruit or fruit juices could potentiall modify the damaged DNA in the human peripheral lymphocytes of young Korean men.

• 대한치과교정학회지
• /
• 제46권2호
• /
• pp.65-72
• /
• 2016

Objective: The purposes of this study were to measure the orthodontic forces generated by thermoplastic aligners and investigate the possible influences of different activations for lingual bodily movements on orthodontic forces, and their attenuation. Methods: Thermoplastic material of 1.0-mm in thickness was used to manufacture aligners for 0.2, 0.3, 0.4, 0.5, and 0.6 mm activations for lingual bodily movements of the maxillary central incisor. The orthodontic force in the lingual direction delivered by the thermoplastic aligners was measured using a micro-stress sensor system for the invisible orthodontic technique, and was monitored for 2 weeks. Results: Orthodontic force increased with the amount of activation of the aligner in the initial measurements. The attenuation speed in the 0.6 mm group was faster than that of the other groups (p < 0.05). All aligners demonstrated rapid relaxation in the first 8 hours, which then decreased slowly and plateaued on day 4 or 5. Conclusions: The amount of activation had a substantial influence on the orthodontic force imparted by the aligners. The results suggest that the activation of lingual bodily movement of the maxillary central incisor should not exceed 0.5 mm. The initial 4 or 5 days is important with respect to orthodontic treatment incorporating an aligner.

• 환경영향평가
• /
• 제14권6호
• /
• pp.427-441
• /
• 2005

In order to choose proper dispersion model and emission factors suitable in Korea in evaluating the effect of pollutants emitted by the vehicles in highway on nearby area, various road dispersion models and vehicle emission factors were reviewed. With theoretical inter-comparisons of the exiting models for line source, CALINE 3 and CALINE 4 models which were suggested by US EPA were selected as the road dispersion models for further evaluation with the measurement. The emission factors suggested by Korean Ministry of Environment was turned out to be appropriate since the classification of vehicle kinds was simple and easy to apply in Korea. The comparisons of predicted concentrations by CALINE 3 and 4 models with the measurements in flat, fill and bridge road types showed that CO and PM-10 were in good agreements with experiments and the differences between CALINE 3 and 4 models are negligible. The model concentrations of $NO_2$ by CALINE 4 were also in good agreement with the measurement but those by CALINE 3 were over-predicted. The discrepancies in CALINE 3 model were due to rapid decay reaction of $NO_2$ near the highway, which was not included in CALINE 3 model. For the road type with one & two side cutting grounds, the similar patterns as the flat & fill road type for CO, PM10, & $NO_2$ were observed but the number of data for comparison in these cases were not enough to draw the conclusion. These results lead to the conclusion that CALINE4 model is proper in road environmental impact assessment near the highway in flat, fill and bridge road types.