• Construction Engineering and Management
• /
• v.4 no.1 s.13
• /
• pp.55-60
• /
• 2003

Unstructured workspaces which are typical in construction contain unpredicable activities as well as changing environments. Most automated and semi-automated construction tasks require real-time information about the local workspace in the form of 3D geometric models. This paper describes and demonstrates a new rapid, local area geometric data extraction and 3D visualization method for unstructured construction workspaces that combines human perception, simple sensors, and descriptive CAD models. The rapid approach will be useful in construction in construction in order to optimize automated equipment tasks and to significantly improve safety and a remote operator's spatial perception of the workspace.

• Analytical Science and Technology
• /
• v.33 no.4
• /
• pp.186-196
• /
• 2020

A simple and rapid preconcentration method of actinide from seawater using Actinide resin was developed and tested with the seawater spiked with a known U and Th. The developed method of Actinide resin based on column chromatography is less time-consuming and requires less labor compared with a typical co-precipitation technique for preconcentration of actinides. U and Th, which are relatively weak-bonded with Actinide resin among actinides, were used to determine the optimum flow rate of seawater sample and evaluate the capacity of Actinide resin to concentrate actinides from seawater. A flow rate of 50 mL min^-1 was available with Actinide resin 2 mL (BV, bed volume). When 5 or 10 L of seawater containing U were loaded on Actinide resin (2 mL, BV) at 50 mL min^-1, the recovery of U was 93 % and 86 %, respectively. For extraction of actinides bound with Actinide resin, we compared three methods: solvent extraction, ashing-acid digestion, and ashing-microwave digestion. Ashing-microwave digestion method shows the best performance of which is the recovery of 100 % for U and 81 % for Th. For the preconcentration of actinides in 200 L of seawater, a typical coprecipitation method requires 2-3 days, but the developed method in this study is achieved the high recovery of actinides within 12 h.

• Journal of Radiation Protection and Research
• /
• v.21 no.1
• /
• pp.9-16
• /
• 1996

For the determination of radiostrontium, $^{89}Sr\;and\;^{90}Sr$ in environmental soil sample, a solvent extraction method for the separation of Ca and Sr from matrix using crown ether was investigated. In comparison with the existing fuming nitric acid method, the extraction method showed high chemical yield of strontium and provided simple and rapid analytical steps. The new analytical method applied to the determination of radiostrontium in some soil sample around a nuclear power station to show that the analytical procedure is readily applicable to the practical radioactivity monitoring.

• Economic and Environmental Geology
• /
• v.27 no.5
• /
• pp.469-477
• /
• 1994

Many researchers have investigated most representative sequential extraction method using various reagents for determining the chemical forms of metals in soils and sediments. In this paper, a newly modified method for sequential extraction scheme based on Tessier's method by Environmental Geochemistry Research, Centre for Environmental Technology, Imperial College, was introduced and examined. In comparison with Tessier's method, originally designed for sediment analysis by Atomic Absorption Spectrophotometry (AAS), the sequential extraction scheme has been developed for the multi-element analysis by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). The partitioning of particulate trace elements was classified into five fractions: (i) exchangeable, (ii) bound to carbonates or specially adsorbed, (iii) bound to Fe and Mn oxides, (iv) bound to organic matter and sulphides and (v) residuals. The experimental results of the pilot study for in-house reference material (HRM2) and certified international standard reference material (SRM2711) using the modified method showed not only reasonable precision and accuracy but also acceptable overall recovery rates. In addition, mine dump soils sampled in the Dalsung Cu-W mine, Korea were prepared and sequentially extracted using the method. Most of Cu was bound to organic matter/sulphides and residual fractions. The dominant fraction of soil Pb and Zn in the study area was found in the residuals. The fraction of Cd showed a wide variation between samples and could be found bound to the carbonates or specially adsorbed, oxides, organic fraction and residuals. The recovery rates of Cd, however, were poor due to relatively low Cd concentrations in soils. The heavy metals in these mine dumps appear to be in the more inert forms and should not be readily bioavailable. The soils, however, had very low pH values (average 4.1) and had sandy textures; consequently, rapid infiltration of rainfall may increase leaching of Zn and Cd which were found to be around 5 to 10% of the exchangeable fraction. As a result of the investigation of this study, it has been strongly recommended that these mine waste materials should still be considered a significant contaminant source and will need environmental remediation to prevent pollutants from being released into the environment.

• Korean Journal of Pharmacognosy
• /
• v.41 no.1
• /
• pp.62-66
• /
• 2010

In result of analysis for the content determination of ursolic acid(UA) and oleanolic acid(OA) in extract of Eriobotryae folium using HPLC with UV detector, UA in chloroform extract of Moo-mok variety was showed highest content(2.7843 mg/g). And OA in ethyl acetate extract of Dae-bang variety was showed highest content(0.5898 mg/g). These result suggest that direct extraction using organic solvent(chloroform or ethyl acetate) was useful method for rapid quantitative analysis of UA and OA without preprocessing such as drying or fractionation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.3
• /
• pp.33-44
• /
• 2002

In this study, 3-dimensional virtual visualization was performed for a rapid and accurate analysis of sea bottom topography. The visualization was done through the extracted data using the developed program and the generated data using the gridding method. The data extraction program was developed with AutoLISP programming language and this program was able to extract the needed sample bathymetry data from the electronic sea chart systematically as well as effectively The gridded bathymetry data were generated by the interpolation or extrapolation method from the spatially-irregular sample data. As the result of realization for the 3-dimensional virtual visualization, it was shown a proper feasibility in the analysis of the sea bottom topography to determine the route of submarine cable burial.

• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1484-1487
• /
• 1999

Extraction is the most important and tedious step to determine water-soluble vitamin C in water-insoluble chewing gum. For the rapid determination of vitamin C in chewing gum, a new method of dispersion in tetrahydrofuran(THF) was performed. Vitamin C was easily extracted from gum base using THF The content of vitamin C in chewing gum was rapidly quantified with high reliability by an enzymatic method using a chewing gum sample dispersed in tetrahydrofuran.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.2
• /
• pp.50-61
• /
• 2002

In this study, 3-dimensional virtual visualization was performed for a rapid and accurate analysis of sea bottom topography, The visualization was done through the extracted data using the developed program and the generated data using the gridding method. The data extraction program was developed with AutoLISP programming language and this program was able to extract the needed sample bathymetry data from the electronic sea chart systematically as well as effectively. The gridded bathymetry data were generated by the interpolation or extrapolation method from the spatially-irregular sample data. As the result of realization for the 3-dimensional virtual visualization, it was shown a proper feasibility in the analysis of the sea bottom topography to determine the route of submarine cable burial.

• Journal of Information Processing Systems
• /
• v.1 no.1 s.1
• /
• pp.9-13
• /
• 2005

Computer security has become a critical issue with the rapid development of business and other transaction systems over the Internet. The application of artificial intelligence, machine learning and data mining techniques to intrusion detection systems has been increasing recently. But most research is focused on improving the classification performance of a classifier. Selecting important features from input data leads to simplification of the problem, and faster and more accurate detection rates. Thus selecting important features is an important issue in intrusion detection. Another issue in intrusion detection is that most of the intrusion detection systems are performed by off-line and it is not a suitable method for a real-time intrusion detection system. In this paper, we develop the real-time intrusion detection system, which combines an on-line feature extraction method with the Least Squares Support Vector Machine classifier. Applying the proposed system to KDD CUP 99 data, experimental results show that it has a remarkable feature extraction and classification performance compared to existing off-line intrusion detection systems.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.05a
• /
• pp.3-8
• /
• 2000

A simple and rapid simultaneous analysis method of BTEX and TPH in soil was developed. 5g of soil sample were mixed with sodium sulfate and then extracted with 10 mL of mixture of acetone and dichloromethane (1:1). Extraction was performed for 10 min in sonicator and analysis was with GC-FID. The detection limits of BTEX and TPH was 0.8 and 10 mg/kg, respectively. The analytical recoveries were >90% for all BTEX and TPH. Low boiling point fuels and high boiling point fuels are consistently reproduced within RSD 7%. The analysis results show very simple and rapid quantitation of BTEX and TPH in soil sample with low RSD.