• 대한조선학회지
• /
• 제23권2호
• /
• pp.1-13
• /
• 1986

The nonlinear hydrodynamic forces acting on a two-dimensional circular cylinder, oscillating with large amplitude in the free surface, are calculated by using the Semi-Lagrangian Time-Step-ping Method used by O.M. Faltinsen. In present calculation the position and the potential value of free surface are calculated using the exact kinematic and dynamic free surface boundary condition. At each time step an integral equation is solved to obtain the value of potential and normal velocity along the boundaries, consisting of both the body surface and the free surface. Some effort was devoted to the elimination of instability arising in the range of high frequency. Numerical simulations were performed up to the 3rd or 4th period which seems to be enough for the transient effect to die out. Each harmonic component and time-mean force are obtained by the Fourier transform of forces in time domain. The results are compared with others' experimental and theoretical results. Particularly, the calculation shows the tendency that the acceleration-phase 1st-harmonic component(added mass) increases as the motion amplitude increases and a reverse tendency in the velocity-phase 1st-harmonic component(damping coefficient). The Yamashita's experimental result also shows the same tendency. In general, the present result show relatively good agreement with the Yamashita's experimental result except for the time-mean force.

• Journal of Positioning, Navigation, and Timing
• /
• 제7권2호
• /
• pp.91-103
• /
• 2018

Conventional inertial measurement units cannot be used in the spinning vehicle with high rotation rate due to gyro's narrow operation range. By the way, angular acceleration can be measured using the accelerometer array distributed in the vehicle. This paper derives a mechanization for the gyro-free INS in the navigation frame, and proposes a gyro-free INS algorithm based on the derived mechanization. In addition, the proposed algorithm is used to estimate angular velocity, attitude, velocity, and position of a spinning vehicle with high rotation rate. A MATLAB-based software platform is configured in order to show validation of the proposed algorithm. The reference trajectory of a spinning vehicle at 3 round per second, 30 round per second are set up, and the outputs of accelerometer are generated when triads of accelerometer are located at the origin and all the axes. Navigation results of the proposed algorithm for the generated output are presented. The results show that the proposed navigation algorithm can be applied to the spinning vehicle with high rotation rate.

• 한국자기공명학회논문지
• /
• 제12권1호
• /
• pp.51-59
• /
• 2008

Convection effect in liquids has been one of the main targets to be overcome in pulsed-field-gradient NMR measurements of self-diffusion coefficients since the temperature gradient along the sample tube generated by the heating and/or cooling process causes the effect, resulting in additional diffusion. It is known that the capillary is the most appropriate tube type for diffusion experiments at variable temperatures since the narrower tube suppresses convection effectively. For evaluating the properties of hydrogen bonding, diffusion coefficients of the $K^+$-complexed and free valinomycin in a micro tube have been determined at various temperatures. From the analysis of the obtained diffusion coefficient values, we could conclude that the intramolecular hydrogen bonding in both of the $K^+$ complexed and free valinomycin in a non-polar solvent is preserved over the observed temperature range, and the temperature dependence of hydrogen bonding is more pronounced in free valinomycin. It is also thought that there is no big change in the radius of the $K^+$-complexed as temperature is varied, and the ratio of overall radius, $r_{complex}/r_{free}$ is slightly decreased as temperature rises.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.276-276
• /
• 2007

As a candidate for lead-free piezoelectric materials, dense $(Na_xK_{0.94-x}Li_{0.06})NbO_3$ ceramics were developed by conventional sintering process. Sintering temperature was lowered by adding 1 mol% $Li_2O$ as a sintering aid. The electrical properties of $(Na_xK_{0.94-x}Li_{0.06})NbO_3$ ceramics were investigated as a function of Na/K ratio. When the sample sintered at $950^{\circ}C$ for 4 h with the compositions of morphotropic phase boundary, 0.47 < x < 0.51, electro-mechanical coupling factor ($k_p$) and piezoelectric coefficient ($d_{33}$) were found to reach the highest values of 0.42 and 190 pC/N, respectively. These excellent piezoelectric and electro-mechanical properties indicate that this system is potentially good candidate for lead-free material for a wide range of electro-mechanical transducer applications.

• 한국식생활문화학회지
• /
• 제11권3호
• /
• pp.385-392
• /
• 1996

The soluble solid of red pepper was extracted by water in order to investigate changes of soluble solid content by different extraction temperature $(4{\sim}90^{\circ}C)$ and time $(1/2{\sim}3\;hrs)$, and the contents of carotenoid, capsaicinoids, free sugar, organic acid, free amino acid in soluble solid were measured. Most of soluble solid in red pepper was extracted within the first 2 hrs and $93{\sim}98%$ of total soluble solid was extracted during the first 30 min. The contents of carotenoid increased by increasing extraction time and temperature, but decreased by increasing extraction time at $60^{\circ}C$ and $90^{\circ}C$. ${\beta}$-carotene content was sharply decreased after 2 hrs at $90^{\circ}C$. The content of capsaicinoid was sharply increased between 1 hr and 2 hr. Fructose and glucose in red pepper were extracted in the range of $83.8%{\sim}96.4%$ and the contents of free sugar gradually increased by increasing extraction time and temperature. The content of organic acid was gradually increased by increasing extraction time and temperature and the greatest amount of organic acid was extracted during the first 30 min of extraction time. The content of free amino acid was decreased by increasing extraction temperature.

• 접착 및 계면
• /
• 제8권4호
• /
• pp.8-13
• /
• 2007

본 연구에서는 teramethylxylene diisocyanate (TMXDI)와 poly(tetramethylene glycol) (PTMG), polycarprolactone (PCL), dimrthylol proponic acid (DMPA)를 사용하여 무용제형 수분산 폴리우레탄을 합성하였으며, 음이온성기의 함량이 열적, 기계적 물성 및 접착력에 미치는 영향을 검토하였다. 합성된 무용제형 수분산 폴리우레탄의 Tg는 $-70{\sim}-50^{\circ}C$ 범위이고 PCL의 함량이 증가함에 따라 Tg는 상승하였다. 인장강도와 접착력, 열 안정성은 PCL과 음이온성기의 함량이 증가함에 따라 증가하였고 신율은 감소하였다.

• Structural Engineering and Mechanics
• /
• 제82권2호
• /
• pp.245-258
• /
• 2022

Many Structural Health Monitoring (SHM) methods have been proposed for structural damage diagnosis and prognosis. However, SHM for pinched hysteretic structures can be problematic due to the high level of nonlinearity. The model-free hysteresis loop analysis (HLA) has displayed notable robustness and accuracy in identifying damage for full-scaled and scaled test buildings. In this paper, the performance of HLA is compared with seven other SHM methods in identifying lateral elastic stiffness for a six-story numerical building with highly nonlinear pinching behavior. Two successive earthquakes are employed to compare the accuracy and consistency of methods within and between events. Robustness is assessed across sampling rates 50-1000 Hz in noise-free condition and then assessed with 10% root mean square (RMS) noise added to responses at 250 Hz sampling rate. Results confirm HLA is the most robust method to sampling rate and noise. HLA preserves high accuracy even when the sampling rate drops to 50 Hz, where the performance of other methods deteriorates considerably. In noisy conditions, the maximum absolute estimation error is less than 4% for HLA. The overall results show HLA has high robustness and accuracy for an extremely nonlinear, but realistic case compared to a range of leading and recent model-based and model-free methods.

• Composites Research
• /
• 제20권1호
• /
• pp.8-14
• /
• 2007

플랩을 갖는 복합재 평판날개에 대해서 유격 비선형성과 구동장치의 동적 강성을 고려하여 비선형 공탄성 해석을 수행하였다. DHM 방법을 사용하여 아음속 비정상 공기력을 계산하였으며 유격은 기술함수를 적용하여 이선형 스프링으로 가정하였다. 동적 강성을 기어시스템의 지배방정식으로부터 계산하고, 적층각과 재질에 따른 공탄성 특성을 살펴보았다. 선형 및 비선형 공탄성 해석 결과들은 플러터 특성이 유격과 동강성에 따라 크게 달라지는 것을 보여주었다. 다양한 형태의 제한주기거동이 선형플러터 속도 이전과 이후에서 관찰되었다.

• 동아시아식생활학회지
• /
• 제23권1호
• /
• pp.85-91
• /
• 2013

Korean traditional rice wine, Makgeolli, has been widely consumed and increasingly popular in Korea. In this study, we examined Makgeolli supplemented with cranberries (0, 5, 10 and 15% by rice weight) during fermentation for seven days for the various quality characteristics : pH, total acidity, soluble contents, color, reducing sugars, alcohol contents, and DPPH free radical scavenging activities, total flavonoids, microbial properties, and sensory properties. After the pH value decreased from a range of 4.40~5.63 to 3.83~3.94 up to day 3, the pH gradually increased until day 7. As fermentation proceeded, soluble contents and reducing sugar increased in most of the samples, with a temporary reduction after day 2. There were no differences in L and b color values, but the "a" value showed significant differences with the rate of cranberry added. The DPPH free radical scavenging activity and total flavonoid content of cranberry Makgeolli were higher than those of the control. After fermentation for seven days, the alcohol content ranged from 14.57 to 17.40%, while total acidity levels were within the range of 0.50 to 0.54%. Yeast cell counts increased until day 3 and then, gradually deceased. In the sensory evaluation, Makgeolli with 10% cranberry showed the highest overall acceptance.

• 대한유전성대사질환학회지
• /
• 제17권2호
• /
• pp.39-47
• /
• 2017

Purpose: A sensitive gas chromatography mass spectrometry (GC-MS) method was developed for screening of fatty acid oxidation disorders. Methods: The assay utilized a simple protein precipitation with sulfosalicylic acid followed by tert-butyl dimethylsilyl (TBDMS) derivatization of hydroxyl functional group by N-tert-butyldimethylsilyl-N-methyltrifluoroacetamide (MTBSTFA). Results: Calibration curves of spiked pooled plasma showed a linear relationship in the range of 0.01 ng -2 mg with correlation coefficient value greater than 0.98. Limits of detection (LOD) and limits of quantification (LOQ) were found in the range of 0.9-8.8 ng and 9-88 ng, respectively. Conclusion: The new developed method might be useful for a rapid, sensitive screening of inherited fatty acid oxidation disorders. In addition, the method expected to be one of the alternative method for screening newborns of metabolic disorders in the laboratories where expensive MS/MS is unavailable.