• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.1
• /
• pp.57-70
• /
• 2009

Considerable advance has been made on research on effect of steel pipe Umbrella Arch Method (UAM) and mechanical reinforcement mechanism through numerical analyses and experiments. Due to long analysis time of three-dimensional analysis and its complexity, un-quantitative two-dimensional analysis is dominantly used in the design and application, where equivalent material properties of UAM reinforced area and ground are used, For this reason, development of reasonable, theoretical, quantitative and easy to use design and analysis method is required. In this study, both field UAM tests and laboratory tests were performed in the residual soil to highly weathered rock; field tests to observe the range of reinforcement, and laboratory tests to investigate the change of material properties between prior to and after UAM reinforcement. It has been observed that the increase in material property of neighboring ground is negligible, and that only stiffness of steel pipe and cement column formed inside the steel pipe and the gap between steel pipe and borehole contributes to ground reinforcement. Based on these results and concept of Convergence Confinement Method (CCM), two dimensional axisymmetric analyses have been performed to obtain the longitudinal displacement profile (LDP) corresponding to arching effect of tunnel face, UAM effect and effect of supports. In addition, modified load distribution method in two dimensional plane-strain analysis has been suggested, in which effect of UAM is transformed to internal pressure and modified load distribution ratios are suggested. Comparison between the modified method and conventional method shows that larger displacement occur in the conventional method than that in the modified method although it may be different depending on ground condition, depth and size of tunnel, types of steel pipe and initial stress state. Consequently, it can be concluded that the effect of UAM as a beam in a longitudinal direction is not considered properly in the conventional method.

• Korean Journal of Culture and Social Issue
• /
• v.23 no.2
• /
• pp.295-332
• /
• 2017

The main purpose of this research is to analyze stress, social support and coping behavior of adults based on their level of self-efficacy. A total of 899 adults (399 male; 500 female), each with a child attending either elementary and secondary school, participated in the study. The inter-rater reliability for the open-ended questionnaire utilized in the study was 93.4%, with a Kappa coefficient of .92. The range of Cronbach α for the variables measured through a quantitative method was .87~.92. The results were as follows: First, the representative responses to the question about their most painful stress experiences were, financial difficulties, child rearing and duties of workplace. The Lower Efficacy group, compared to the Upper Efficacy group, responded much more with financial difficulties related responses. There were significant differences in the level of stress symptoms according to level of self-efficacy. The Lower Efficacy group expressed stronger levels of stress symptoms when compared to the Upper Efficacy group. Second, in terms of social support, the participants responded that they received the most help from their family members, followed by none(self), and friends. When comparing the two efficacy groups, the Upper Efficacy group responded most frequently that they received social support from their family members, whereas the Lower Efficacy group indicated none. There were significant differences in the level of relational conflicts according to the level of self-efficacy. The Upper Efficacy group showed much less conflict in parent-child relations, spousal relations and relations with their boss, compared to the Lower Efficacy group. Third, for the type of social support participants received, the most frequent response was emotional support, followed by none, and advice. Relatively, when comparing the two groups with each other, the Lower Efficacy group responded more frequently with none, whereas for the Upper Efficacy group responded more frequently with advice. There were significant differences in the amount of emotional support received according to level of self-efficacy. The Upper Efficacy group received much more emotional support from their spouses and their bosses compared to the Lower Efficacy group. Fourth, the most frequently adopted coping style to stress was self-regulation, followed by direct problem solving, and nothing(none). The most frequent response for the Upper Efficacy group was direct problem solving, whereas for the Lower Efficacy group was nothing(none). There was a significant difference in coping efficiency to stress according to level of self-efficacy. The Upper Efficacy group coped more efficiently with stress than the Lower Efficacy group.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.4
• /
• pp.216-224
• /
• 2023

Since maize (Zea mays L.) originated in central and south America, it requires warm climate conditions throughout its growing season. Growth halts when night-time temperatures drop below 10℃, and the plant may die if temperature reach -1.7℃. Thus, temperature should be maintained between 10 and 30℃ from seeding to maturity. The germination temperature for maize should be at least 8-11℃, whit an optimal range 32-34℃. Since temperature significantly affects the germination rate and period, it plays a crucial role in maize growth. In this study, we evaluated the quantity and feed value of 11 major varieties to determine those best suited for maize cultivation as feed in higher latitude, specifically in Democratic People's of Republic of Korea, below 38 degrees north. A cultivation test was also conducted in Suwon in Republic of Korea, to assess adaptability in areas south of Mt. Suyang. Among the varieties tested, Shinhwangok2 reached silking the fastest, in 65 days, while Gwangpyeongok took the longest at 75 days. The stem length of all varieties exceeded 230 cm. Gwangpyeongok had the tallest stems, while Daanok and Shinhwangok2ho displayed the highest ear ratios. Dacheongok presented the highest values in both dry matter and TDN quantity, with 31,420 kg/ha and 21,66 kg/ha respectively. Pyeonggangok had the highest crude protein content at 8.0%. TDN (%) ranged from 57-68%, with Hwangdaok reaching up to 68%. Based on these findings, Dacheongok and Pyeonggangok appear to be the most suitable varieties for cultivation in terms of both quantity and feed value.

• Journal of Environmental Impact Assessment
• /
• v.32 no.6
• /
• pp.389-406
• /
• 2023

The research area, located in the northern coastal region of South Korea's West Sea, involves three bird habitats. Among these are two newly established habitats in Songdo International Business District, created by filling and developing tidal flats that were previously utilized as stopover sites for migratory birds. One of these areas showed decrease (Residual tidal flats, site.1) while the other showed increase (Artificial lake, site.2) in bird influx. The third habitat (Namdong reservoir, site.3) is a pre-existing stable habitat which has been maintained as a stable habitat. This study conducts an assessment of habitats based on avian population clusters and environmental surveys and proposes habitat management measures. A survey of bird populations and habitat environments was conducted for a total of 39 occasions from January to December 2022. The observed bird species totaled 14 families and 48 species with 20,760 individuals. Compared to the existing habitats, the newly established habitats showed relatively lower influx of bird species and individuals. During the habitat assessment, the newly established habitats were rated as I to II grade, while the existing habitat was rated as relatively high III grade on the grading assessment of the tidal flat. An analysis of habitat types revealed that the existing habitat, in which diverse strategies for habitat type diversity and mitigating anthropogenic interference were demonstrated, attracted a diverse range of bird species. Through this research, it was deduced that the diversity of habitat types plays a significant role in attracting various bird species. Upon evaluation of habitat types concerning the habitat characteristics of the bird species selected for habitat management, as habitat management measures, it is deemed that the creation of shielded green areas (referred to as 'buffer green') to minimize interference from the surroundings, the establishment of reed fields (site.1, 2) positively correlated with reservoirs, and the improvement of sandbanks (site.1) positively associated with tidal flats, the two relations which we drew from correlation analysis between occurrence species and habitat types, would contribute to the future restoration and maintenance of stable habitats. The results of this study can be applied not only to the study area but also to other development zones, such as coastal reclamation sites, which share similar geographical and environmental characteristics, including arrival sites for migratory birds.

• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.489-495
• /
• 2023

In this study, we detected the presence of residual pesticides in 341 agricultural products collected from local food outlets in western Gyeonggi Province. Residual pesticides were detected in 105 (30.8%) samples. Six samples exceeded the legal limits for residual pesticides, resulting in a non-compliance rate of 1.8%, which was slightly higher than the average non-compliance rate of 1.4% in the last three years. Among the tested agricultural products, only fruits and vegetables were found to have pesticide residues, with 24 of 34 fruits (a detection rate of 70.6%) and 81 of 277 vegetables (a detection rate of 29.2%) testing positive. In total, 59 types of pesticides, including acetamiprid, which was detected 208 times, were detected and had a detection range of 0.01-2.38 mg/kg. Among the 105 agricultural products containing pesticide residues, a single pesticide was detected in 62 samples (59%) and two or more pesticides were detected in 43 samples (41%). In particular, 14 pesticides were detected in the same sample of peaches; dinotefuran was detected 21 times. Upon examining the toxicity of the detected pesticides, Class III pesticides (moderate toxicity) were detected 44 times (21.2%) and Class IV pesticides (low toxicity) were detected 164 times (78.8%). Class I, II, and III pesticides with fish toxicity were detected 68 (32.7%), 14 (6.7%), and 126 times (60.6%), respectively. Upon examining the exposure to high-frequency pesticide components detected five or more times, the hazard index was found to be ≤2.8%. Accordingly, the hazard of residual pesticides based on dietary intake was deemed insignificant.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.192-214
• /
• 2023

Wooden architectural cultural heritages are one of the visible legacies that show the national's identity. Even when the concept of 'the original' of cultural heritages was not accurately understood, the emphasis of preservation and management of cultural heritages was placed on 'preservation of the original form' or 'maintenance of the original form'. Moreover, these days, following the trend of international preservation principles, cultural heritages are considered important as "values as historical objects." This paper is the result of an attempt to determine the scope and content of what parts should be monitored to maintain the original form of wooden architectural cultural heritage. The first thing to be done in monitoring wooden architectural cultural heritage is to check the condition of the ground and foundation. The second is the column. This is because the instability of the column causes damage to the joint with each member and the fitting part, resulting in physical changes leading to damage to the wall. The third is monitor the roof tiles. If the leak continues into the building due to the separation or damage of the roof, the defect should be partially dismantled and repaired, so it should be monitored to maintain its original shape as much as possible. The monitoring range of the base, column, and roof serves as a reference point for identifying what damage is being done to the relevant cultural heritages. In other words, the data at the time when monitoring began becomes the 'original' for the year. Alternatives based on the analysis of monitoring for the preservation of original cultural heritages should be actively introduced. In addition, by sharing the current state and situation of cultural heritages as a result of monitoring with various related organizations, preventive preservation should be established rather than preservation of cultural heritages by "intervention."

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.288-318
• /
• 2023

This work began with the aim of examining the history of the concept "cultural property" that is expected to disappear, and the main subject of research was the history that preceded the spread of this notion throughout society. The phrase "cultural property" first appeared in the 1920s, and was used in various fields such as literature, history, music, and philosophy in the context of cultural resources. Until immediately following liberation from the Japanese colonial era, the meaning of cultural assets was widely applied in the range of "cultural resources," and during this period, it was often used to help supplant the reality and history of Japanese occupation. Immediately after the Korean War, it was also employed for the purpose of 'restoration of cultural resources through war'. Recognition of cultural property directly influenced by Japan's Cultural Heritage Protection Act has occurred since 1950s. In the early 1960s, the enactment of various laws related to cultural properties and the establishment of the Cultural Heritage Administration caused the meaning of cultural property to be limited to 'cultural heritage'. In this way, the definition of state-led cultural property has continued to apply to this day. It has not been clearly confirmed whether the concept of cultural properties was imported from Japan through means such as the Cultural Heritage Protection Act. Cases in which several Japanese students endorsed the concept of cultural property within Korea serve to increase the likelihood that the concept was indeed imported from Japan. However, "coined language using multiple Chinese characters," "the phenomenon of cultural complex words in the 1920s,", and "cases of non-Japanese international students using the concept of cultural property" also open up the possibility of their own occurrence. Apart from the general importance of the concept of cultural property, intellectuals at the time used this concept to promote internal development and the overcoming of colonial Joseon. In this research, it was confirmed that the conceptual word cultural property was older and had a wider history than the general perception had indicated previously. The history of the conceptual term "cultural property" may appear to be more than 60 years old based on the enactment of the Cultural Heritage Protection Act, but in fact it is nearly 100 years old when traced back to on 1925, as established here. In general, the creation and disappearance of terms may proceed naturally with social change, but such terms may alternatively be created or erased through national policy. Identifying the origins of a phrase that is about to disappear represents a significant task for purposes of establishing its historical meaning.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.417-425
• /
• 2023

The aim of this study was to derive stem taper equations for Quercus acuta, one of main evergreen broad-leaved tree species found in warm temperate regions, and to prepare a stem volume table using those stem taper equations. A total of 688 individual trees were used in the analysis, which were collected from Jeonnam-do, Gyeongnam-do, and Jeju-do. The stem taper models applied to derive the stem curve pattern were the Max and Burkhart, Kozak, and Lee models. Among the three stem taper models, the best explanation of the stem curve shape of Q. acuta was found to be given by the Kozak model, which showed a fitness index of 0.9583, bias of 0.0352, percentage of estimated standard error of 1.1439, and mean absolute deviation of 0.6751. Thus, the stem taper of Q. acuta was estimated using the Kozak model. Moreover,thestemvolumecalculationwasperforme d by applying the Smalian formula to the diameter and height of each stem interval. In addition, an analysis of variance (ANOVA) was conducted to compare the two existing Q. acuta stem volume tables (2007 and 2010) and the newly created stem volume table (2023). This analysis revealed that the stem volume table constructed in the Wando region in 2007 included about twice as much as the stem volume tables constructed in 2010 and 2023. The stem volume table (2023) developed in this study is not only based on the regional collection range and number of utilized trees but also on a sound scientific basis. Therefore, it can be used at the national level as an official stem volume table for Q. acuta.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1299-1308
• /
• 2023

Forest fires are becoming more frequent and larger around the world due to climate change. Remote sensing such as satellite images can be used as an alternative or assistance data because it reduces various difficulties of field survey. Forest burn severity (differenced normalized burn ratio, dNBR) is calculated through the difference in normalized burn ratio (NBR) before and after a forest fire. The images used in the NBR formula are based on Landsat's near-infrared (NIR) and short-wavelength infrared (SWIR) bands. South Korea's satellite images don't have a SWIR band. So domestic studies related to forest burn severity calculated dNBR using overseas images or indirectly using the normalized difference vegetation index (NDVI) using South Korea's satellite images. Therefore, in this study, dNBR was calculated by substituting the mid-wavelength infrared (MWIR) band of Kompsat-3A (K3A) instead of the SWIR band in the NBR formula. The results were compared with the dNBR results obtained through Landsat which is the standard for dNBR formula. As a result, it was shown that dNBR using K3A's MWIR band has a wider range of values and can be expressed in more detail than dNBR using Landsat's SWIR band. Therefore, it is considered that K3A images will be highly useful in surveying burn areas and severity affected by forest fires. In addition, this study used the K3A's MWIR band images degraded to 30 m. It is considered that much better results will be obtained if a higher-resolution MWIR band is used.

• Journal of Venture Innovation
• /
• v.4 no.2
• /
• pp.97-108
• /
• 2021

Labor contracts appear in form as an exchange relationship between labor products and wages, but since they transcend the level of simple barter, they can be economically identified as "trading" and can be identified as "rental." From a legal point of view, a legal device that legally supports and imposes binding force on commodity exchange relations is a contract. Such a labor contract led to a relationship in which wages were received and a certain amount of time was placed under the direction and supervision of the employer as a counter benefit to the receipt of wages. Since working hours are subordinate hours with one's labor under the disposition authority of the employer, long hours of work can be done for the health and safety of workers and furthermore, it can be an act that violates the value to enjoy as a human being. The reduction of working hours needs to be shortened in terms of productivity and enjoyment of workers' culture so that they can expand and reproduce, but users' corporate management labor and production activities should also be compatible compared to those pursued by capitalist countries. Working hours can be seen as individual time and time in society as a whole, and long hours of work at the individual level are reduced, which is undesirable at the individual level, but an increase in products due to an increase in production time at the social level can help social development. It is necessary to consider working hours in terms of finding the balance between these individual and social levels. If the regulation method of working hours was to regulate the total amount of working hours, flexibility and elasticity of working hours are a qualitative regulation method that allows companies to flexibly allocate and organize working hours within a certain range of up to 52 hours per week. Accordingly, it is necessary to shorten working hours, but expand and implement the flexible working hours system according to the situation of the company. To this end, it is necessary to flexibly operate the flexible working hours system, which is currently limited to six months, handle the selective working hours by agreement between employers and workers, and expand the target work of discretionary working hours according to the development of information and communication technology and new types based on the 4th industrial revolution.