• Korean Journal of Hydrosciences
• /
• v.7
• /
• pp.107-124
• /
• 1996

Pipe design normally requires pump power, discharge or pipe diameter for each condition given. Due to several investigators the pipe friction factor con now be estimated by explicit way for a wide range of flow condition. In various problems of pipe design, however, the flow condition cannot be pre-determined even for a uniformly rough pipe. In these cases a lot of iterations are often required to have an accurate solution with ordinary approach. This paper presents the direct computation method of discharge and pipe diameter without any iteration process. Introducing the power law of friction factor, various non-dimensional physical numbers are derived such as power-diameter number, power-discharge number, diameter-slope number and discharge-slope number. One of the physical numbers concerned with discharge or pipe diameter can be related to a combination of the other in an explicit way.

• Korean Journal of Plant Taxonomy
• /
• v.49 no.3
• /
• pp.269-273
• /
• 2019

We report the meiotic chromosome numbers of four Carex taxa from Korean populations. Three are the first reports made on taxa from Korean populations: Carex appendiculata (Trautv. & C. A. Mey.) $K{\ddot{u}}k$. ($n=27_{II}$), C. fernaldiana H. $L{\acute{e}}v$. & Vaniot ($n=33_{II}$), and C. metallica H.$L{\acute{e}}v$. ($n=15_{II}$). Reports on the other species expand the range of variation in the chromosome number within a taxon, C. miyabei Franch. (n = $43_{II}$, $44_{II}$, $45_{II}$). Carex L. (Cyperaceae) consists of more than 2,000 species worldwide and is the most species-rich genus in Korea. The species diversity in the genus has been hypothesized to be associated with the chromosome variation, but chromosome information pertaining to Korean Carex taxa is not well known. This report updates the chromosome number inventory on Korean Carex to 24 out of 180 taxa.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.11 no.3
• /
• pp.1-8
• /
• 1982

When exact analytical solutions to certain type of heat conduction problems are quite cumbersome or not obtainable, it is important to introduce approximate analytical methods which are simple and useful compared with numerical methods. In this study, therefore, the Heat Balance Integral Method is applied to analysis of steady-state conduction in a straight fin of trapezoidal profile, and the two-dimensional temperature distribution in the fin and the approximate fin efficiency are obtained. Results are compared with those by the one- dimensional analysis and two-dimensional numerical analysis for a wide range of Biot numbers. It is shown that the two-dimensional temperature distribution obtained by the integral method is in good agreement with that by the finite element method at Biot numbers for which the result by the one-dimensional analysis is unreliable.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.4
• /
• pp.916-925
• /
• 1988

The Navier-Stokes equations of the vorticity-stream-function form are solved numerically for the flow past a semicircular arc for Reynolds numbers in the range 0.1

• Wind and Structures
• /
• v.16 no.2
• /
• pp.179-192
• /
• 2013

The flow around two rectangular cylinders with aspect ratio of 0.5 in a tandem arrangement, was investigated using pressure measurements (in a wind tunnel) and flow visualizations (in a water tunnel) in the range of P/h from 0.6 to 4.0. Four flow patterns were identified, and processes of shear layers wrapping around, the shear layer reattachment, vortices wrapping around and vortices impingement, were observed. Mean and rms pressure distributions, flow visualizations and Strouhal numbers were presented and discussed. The paper revealed that the variations of Strouhal numbers were associated with the shear layers or vortex interference around two cylinders.

• Advances in nano research
• /
• v.7 no.4
• /
• pp.265-275
• /
• 2019

In this work, the effect of size on the axial buckling behavior of single-layered graphene sheets embedded in elastic media is studied. We incorporate Eringen's nonlocal elasticity equations into three plate theories of first order shear deformation theory, higher order shear deformation theory, and classical plate theory. The surrounding elastic media are simulated using Pasternak and Winkler foundation models and their differences are evaluated. The results obtained from different nonlocal plate theories include the values of Winkler and Pasternak modulus parameters, mode numbers, nonlocal parameter, and side lengths of square SLGSs. We show here that axial buckling behavior strongly depends on modulus and nonlocal parameters, which have different values for different mode numbers and side lengths. In addition, we show that in different nonlocal plate theories, nonlocality is more influential in first order shear deformation theory, especially in certain range of nonlocal parameters.

• Microbiology and Biotechnology Letters
• /
• v.24 no.3
• /
• pp.364-370
• /
• 1996

Sediments collected from the Jungnang-cheon and its tributaries were used to enumerate anaerobic bacteria by most probable number (MPN) methods. A simple method was developed to detect ferrous ion in the culture fluid in order to count the number of iron ion reducers, and sulfate-reducing bacteria (SRB) and methanogens were detected by the presence of FeS precipitate in the culture or methane in the head space, respectively. The numbers of iron reducer was in the range of 10$^{7}$ - 10$^{8}$ /g in the sediment of the stream containing higher organic content than the tributaries. The sediments of tributaries were analyzed to contain iron reducers less than 10$^{7}$ cells/g. With one exception the numbers of SRB and methanogens were less than 10$^{3}$ cells/g in the sediment. From these results it is concluded that organics in the sediment support the growth of iron reducers, which out-compete SRB and methanogens.

• Tribology and Lubricants
• /
• v.17 no.1
• /
• pp.28-32
• /
• 2001

A new bearing concept, the wave journal bearing, has been developed to improve the static and dynamic performances of an air-lubricated hydrodynamic journal bearing. This concept features waves on bearing surface. In this study, we present the solution of the compressible Reynolds equation valid for arbitrary Knudsen numbers. Straight wave journal bearing is investigated numerically. The performances of straight wave bearing are compared to the plain journal bearing over relatively wide range of bearing number and eccentricity. The wave journal bearing offers better stability than the plain journal bearing under all bearing numbers covered in this study. The bearing load and stability characteristics are dependent on the geometric parameters such as the amplitude and the starting point of the wave relative to the applied load. Under the condition of Knudsen number＞0.01, we can not ignore the effect of slip for Journal bearing.

• Journal of Environmental Health Sciences
• /
• v.19 no.4
• /
• pp.14-24
• /
• 1993

The present study was accomplished from October, 1992 to June, 1993 in order to examine the seasonal community structure of aquatic insects and the biological estimation of water quality by the aquatic insects of the Jungneung and Gokneung streams in the Mt. Bukhan. The obtained results are as follows: 1. The total taxa of aquatic insects appeared as 77 species, 45 genera, 28 families in 7 orders. 2. Seasonal occurrence species numbers showed the highest in the autumn of the Jungneung stream (19 species) and in the spring of the Gokneung stream (41 species). Seasonal occurrence individual numbers showed the highest in the summer of the Jungneung and Gokneung streams (5,901, 3,180 individuals) and the lowest in the autumn of Jungneung stream (612 individuals) and in the winter of the Gokneung stream (1,764 individuals). 3. Annual dominance indices showed 0.52 (stJ1)~1.00 (st.J3) range in the Jungneung stream, and 0.47 (st. G1)~0.76 (G2) range in the Gokneung stream. 4. Seasonal species diversity indices showed 0.00 (st J3, whole seasons)~3.12 (st.J1, Spring) range in the Jungneung stream and 0.69 (st. G2, summer) ~3.10 (st. G4, spring) in the Gokneung stream. 5. Biological saprobic system based on species diversity indices of aquatic insects appeared as oligosaprobic area: site J3, $\alpha$-mesosaprobic area: site J2, G2, G3 and $\beta$-mesosaprobic area: site J1, G1, G4.

• 한국전산유체공학회:학술대회논문집
• /
• 2000.05a
• /
• pp.73-77
• /
• 2000

Small-sized fans for cooling electronic components are usually produced by injection molding in unified form including blade and hub. However, in case of middle and large-sized fans, they deal ill various products with varied numbers of blade or stagger angles after designing a single blade by molding or aluminum die casting. At this occasion, it is necessary to study design method for high-performance axial fans can be operated with various numbers of blades or stagger angle using unique blade for specified conditions. Therefore, the goal in this study is developing a optimal design method which improves performance of axial fans within the large range of operating by single blade.