• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.212-220
• /
• 2020

This study examines the effects on isometric lumbar extension strength, dynamic balance ability, and range of motion, after administering 8 weeks SEBT exercise (dynamic balance exercise) and Lumbar Stabilizing exercise, to open laser lumbar microdiscectomy patients. Totally, 14 patients who underwent preservation treatment for 6 weeks after undergoing open laser lumbar microdiscectomy, were enrolled for the study. Patients were randomly assigned to the Lumbar Stabilizing Exercise Group (LSG, n=7) and SEBT Exercise + Lumbar Stabilizing Exercise Group (SGLS, n=7). Results indicate that isometric lumbar extension strength ratio significantly decreases after 8 weeks rehabilitation exercise in both the LSG (p=0.007) as well as SLSG (p=0.024) groups. Normalized reach distance of the three directions in the Y-balance test to examine the dynamic balance capability showed a significant increase in both groups. The dynamic balance capability showed significant increase to the left (LSG, p=0.010; SLSG, p=0.002) and right (LSG, p=0.002; SLSG, p=0.002). Moreover, significant increase was also obtained in the range of joint operation, in both LSG (p=0.006) and SLSG (p=0.017) groups. These results indicate that both groups of rehabilitation exercise achieve positive outcomes on the isometric lumbar extension strength, range of motion, and dynamic balance ability. However, some results suggest that the SEBT program is likely to have a better efficacy.

• Journal of Agricultural Extension & Community Development
• /
• v.16 no.4
• /
• pp.837-867
• /
• 2009

The purpose of this study is evaluate the direct payment program for rural landscape conservation and deduce facts to improve. This research is composed with a survey on local government officials and farmers joined this program, and used monitering in selected 41 zones. According to the surveys, this program showed a positive contribution to the effects: village harmony, visitors increase, village income. However, It's contribute in short term objectives, but has not yet reach the ultimate goal such as regional development through visitors and village income. We found some problems in the monitering, on the agreement with farmers, range of village activities, operating AgriX program, etc. Finally, we suggest some proposals ; 1) to redefine the aims and range for the program, 2) to clarify a village action program, 3) to strength the admission procedure, 4) to designate district based on landscape resources survey.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.168-175
• /
• 2006

This paper presents surface matching algorithms that can be used to reconstruct the surface topography of an object scanned by an AFM. The essence of the algorithms is to match up neighboring images intentionally overlapped with others. Two performance indexes using the correlation coefficient and the sum of the squared differences are introduced. To compensate for the inaccuracy of the coarse stage implemented to AFM, all the six axes including the rotational degrees of freedom are successively matched so as to maximize the coefficients defined. The results show that the proposed algorithms are useful for measurement range extension of AFM. The results also show that a combined use of the two indexes is beneficial for practical cases.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.51-52
• /
• 2012

Among the PV-AC module topologies, the flyback inverter have been occupied the attention due to its simplicities on configuration and control. Proposed switching control method changes the mode of operation in DCM and BCM alternatively. It is expected that the high performances in efficiency and extension of input voltage range can be achieved by the conduction mode change. Proposed switching technique is validated by PSIM simulation.

• Fashion & Textile Research Journal
• /
• v.14 no.4
• /
• pp.629-634
• /
• 2012

Knitted fabric using acrylic/wool blended yarn (A/W) is increasingly used in the knit industry; subsequently, research on knitted fabric using A/W has increased. This study presents an scientific database from evaluating physical properties of $1{\times}1$ rib stitch using A/W. In this study,$1{\times}1$ rib stitch using A/W were made at various knitting tensions (dial no. 2-6) and the number (4-6) of ply yarn. The physical properties of $1{\times}1$ rib stitch using A/W were measured and analyzed. The density was in the range 5.5-6.4 wales/cm and 4.0-5.6 courses/cm, respectively. The density increased when less plying yarns and more knitting tension were added during knitting. The thickness was in the range of 1.592-2.362 mm and the tensile strength was in the range 32.75-53.63 Kgf/mm. The burst strength was in the range 107.8-139.2 $N/cm^2$. Thickness, tensile strength, and burst strength increased as the number of ply yarn and the knitting tension increased. The elongation and the recovery extension rate were in the range 102.29-112.13% and 96.4-97.7%, respectively. The heat retention rate was in the range 59.3-65.1%. There was no difference of the elongation and the recovery extension rate and the heat retention rate by the knitting tension and the number of the ply yarn. The permeability was in the range 170.5-396.3 $cm^3/cm^2/sec$. Air permeability decreased as the number of ply yarn and the knitting tension increased. The pilling properties were excellent for all $1{\times}1$ rib stitches.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.5
• /
• pp.399-407
• /
• 2013

Organic grape was generally produced in rainshield or plastic greenhouse culture while most of fruits were produced in open field. But little attention has been given to soil properties with different culture facilities in organic grape cultivation. This study was conducted to investigate soil physico-chemical properties of organic grapes farms with different culture facilities and soil management practices. Organic fertilizer was main resource to manage soil at organic grapes farms. Organic grapes farms were applied with total amount of organic fertilizer at one time, either at basal or additional fertilization, whereas conventional grapes farms applied with split fertilization. Bulk density and penetration resistance of soil were lower at both rainshield and green manure-applied plastic greenhouse cultures than those at clean plastic greenhouse culture. Especially, in plastic greenhouse, sod culture with natural weed after green manure application was more effective than general sod culture in improving physical properties of the rhizosphere. The contents of organic matter, available phosphate and exchangeable potassium tended to increase in the soils applied with green manure, and the difference of soil chemical properties were significant between rainshield and plastic greenhouse cultures. The optimum soil management was required in plastic greenhouse because pH, available phosphate and exchangeable cations reached over optimum range. Consequently, the ground cover management is the key factor to affect the chemical properties as well as soil physical properties extensively in plastic greenhouse. It is found that sod culture with natural weed after green manure application resulted in enhancement of utilization efficiency of nitrogen, phosphoric acid and potassium in soil in comparison with general sod culture.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.10
• /
• pp.948-956
• /
• 2010

The purpose of this study was to test the effectiveness of a prototype KAFO (Knee-Ankle-Foot Orthosis) powered by two artificial pneumatic muscles during walking. We had previously built powered AFO (Ankle-Foot Orthosis) and KO (Knee Orthosis) and used it effectively in studies on assistance of plantaflexion and knee extension motion. Extending the previous study to a KAFO presented additional challenges related to the assistance of gait motion for rehabilitation training. Five healthy males were performed gait motion on treadmill wearing KAFO equipped with artificial pneumatic muscles to power ankle plantaflexion and knee extension. Subjects walked on treadmill at 1.5 km/h under four conditions without extensive practice: 1) without wearing KAFO, 2) wearing KAFO with artificial muscles turned off, 3) wearing KAFO powered only in plantaflexion under feedforward control, and 4) wearing KAFO powered both in plantaflexion and knee extension under feedforward control. We collected surface electromyography, foot pressure and kinematics of ankle and knee joint. The experimental result showed that a muscular strength of wearing KAFO powered plnatarfexion and knee extension under feedforward control was measured to be lower due to pneumatic assistance and foot pressure of wearing KAFO powered plnatarfexion and knee extension under feedforward control was measured to be greater due to power assistance. In the result of motion analysis, the ankle angle of powered KAFO in terminal stance phase was found a peak value toward plantaflexion and there were difference of maximum knee flexion range among condition 2, 3 and 4 in mid-swing phase. The current orthosis design provided plantaflexion torque of ankle jonit in terminal stance phase and knee extension torque of knee joint in mid-swing phase.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.12 s.255
• /
• pp.1139-1146
• /
• 2006

Light Oil Flow Standard System(LOFSS) in Korea Research Institute of Standards and Science(KRISS) was designed for oil flowmeter calibration. In order to extend the flow range from 120 $m^3/h$ to 200 $m^3/h$, the build-up technique was applied with two positive displacement flowmeters as master flowmeter. The master flowmeters were calibrated against with LOFSS, which has 0.04 % uncertainty of flow quantity determination, then the test flowmeter is calibrated against two master flowmeters. For uncertainty analysis, the repeatability of master flowmeters, the variation of the fluid density and the pipe volume due to temperature change were scrutinized. The contribution of each uncertainty factors to the calibrator and the correlation of each factors were discussed. For investigating the feasibility of uncertainty analysis, a turbine flowmeter as a transfer package was tested with LOFSS and two reference flowmeter. The hypothesis test for both results was coincide with a 95 % significant level. This means that the uncertainty analysis procedure of the calibrator is reasonable and the extension of flow range with master meters was carry out successfully.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.15 no.2
• /
• pp.15-24
• /
• 2009

Objectives : The purpose of this study is to compare the effectiveness between myofascial release technique and ultrasound in subjects with myofascial pain syndrome. Method : Twenty subjects with myofascial pain syndrome were randomly assigned to a myofascial release technique group(n=10) or an ultrsound group(n=10). The Cervical Range of Motion(C-ROM) instrument was used to measure cervical range of motion. Electromyography(EMG) was used to measure muscle power sternocleidomastoid and upper trapezius. Result : The result of this study shows there were no significant differences in ROM increase and muscle power increase between the myofascial release technique group and the ultrasound group. In the group with Myofascial Release Technique, the average score was $61.40{\pm}11.12$ in SCM flexion of C-ROM and $127.87{\pm}4.24$ in Rt. upper trapezius extension of EMG. In the group with ultra sound, the average score was $68.60{\pm}10.02$ in SCM flexion of C-ROM and $131.50{\pm}5.45$ in Rt. upper trapezius extension of EMG. Conclusion : The results suggest that there was no significant difference between two therapeutic techniques.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.12
• /
• pp.1015-1020
• /
• 2016

An advantage of electric vehicles is that they are environmentally sustainable because they do not emit exhaust gases, such as $CO_2$ or Nox. A disadvantage is the low power performance of the motor and battery source, necessitating a reduction in the weight of the vehicle to increase efficiency. Another disadvantage is that the rechargeable battery enables an electric vehicle to only run for a limited number of miles before requiring electric charging. To solve these problems, the hybrid vehicle has been developed by combining environmental sustainability with the high performance of a conventional internal combustion engine. In this study, an electric UTV (Utility Terrain Vehicle) was transformed into a hybrid vehicle system by outfitting the vehicle with a drive auxiliary power system including a 125 cc internal combustion engine. This modification enabled us to extend the range of the hybrid UTV from 50km to 100km per one electric charging.