• Journal of the Korean Society of Safety
• /
• v.20 no.4 s.72
• /
• pp.114-121
• /
• 2005

Railroad shunting movements connecting and disconnecting train sets are very susceptible to human errors since they depend on human decision-making and action procedure that are variable to situation to situation. Nevertheless, in the investigation of railroad accidents, all the accident causes related with human factors have merely been categorized as 'careless treatment' of the workers without any systematic approach of behavioral sciences or the analysis of human errors. In this research, therefore, 137 accident cases occurred during railroad shunting movements and 435 accident cases occurred during driving were analyzed with a special interest of human errors. According to results, the traditional accident investigation scheme used for last several decades did not seem to be appropriate for catching up true accident causes with respect to human errors. In addition, both signal men and locomotive drivers made many mistakes in judgement/action stage while the former mainly commit judgement tasks where as the latter mainly commit cognition tasks. Ant those tasks such as 'confirmation of signal and route', 'location check-up of connected train sets', and 'route identification for a shift of track' ranked highly for accident susceptibility.

• Economic and Environmental Geology
• /
• v.38 no.2 s.171
• /
• pp.155-163
• /
• 2005

For an unbiased TF (Tansfer Function) estimations we investigate geomagnetic TF derived from ICHEON and YONGIN sites, employing RR (Remote Reference) and SNS (Signal Noise Separation) techniques. The Rh technique, which requires synchronized field variations recorded at a clean remote site, is a reliable method to minimize the bias of TF by uncorrelated noises in magnetic channels. Meanwhile, SNS technique based on the assumption of noise-free remote data can improve the signal-noise level by separating signal TF and noise TF, which is successfully applied to the environments with strong correlated noises. In this study, TF at YONGIN is analyzed using geomagnetic data from ICHEON site as a remote reference, which seem to have somewhat better data quality. The application of Rh technique reduces the bias of TF, which appears in single site robust estimation, and makes curves in the amplitude and phase of TF more smooth as frequency. Futhermore, in order to investigate noise source quantitatively, SNS technique is applied. The results of SNS suggest that dominant noise source seems to be located at western region of YONGIN. This noise source is considered to originate from railway system such as KTX and national subway. which passes through the west regions of YONGIN.

• Smart Structures and Systems
• /
• v.12 no.3_4
• /
• pp.251-269
• /
• 2013

Measurement of deflections of certain bridges is usually hampered by corruption of the GPS signal by multipath associated with passing vehicles, resulting to unrealistically large apparent displacements. Field data from the Gorgopotamos train bridge in Greece and systematic experiments revealed that such bias is due to superimposition of two major effects, (i) changes in the geometry of satellites because of partial masking of certain satellites by the passing vehicles (this effect can be faced with solutions excluding satellites that get temporarily blocked by passing vehicles) and (ii) dynamic multipath caused from reflection of satellite signals on the passing trains, a high frequency multipath effect, different from the static multipath. Dynamic multipath seems to have rather irregular amplitude, depending on the geometry of measured satellites, but a typical pattern, mainly consisting of a baseline offset, wide base peaks correlating with the sequence of main reflective surfaces of the vehicles passing next to the antenna. In cases of limited corruption of GPS signal by dynamic multipath, corresponding to scale distortion of the short-period component of the GPS waveforms, we propose an algorithm which permits to reconstruct the waveform of bridge deflections using a weak fusion of GPS and RTS data, based on the complementary characteristics of the two instruments. By application of the proposed algorithm we managed to extract semi-static and dynamic displacements and oscillation frequencies of a historical railway bridge under train loading by using noisy GPS and RTS recordings. The combination of GPS and RTS is possible because these two sensors can be fully collocated and have complementary characteristics, with RTS and GPS focusing on the long- and short-period characteristics of the displacement, respectively.

• Journal of Korean Society of Transportation
• /
• v.31 no.1
• /
• pp.3-13
• /
• 2013

This paper reviews the characteristics of dilemma zone by analysing the influence exerted by actual location of intersection traffic signal on behaviour of drivers approaching signalized intersection in urban area. The analysis of approach speed was based upon a 'before and after' comparison, measured at three sites where the locations of traffic signals were changed. The study demonstrated that, when traffic signal changed to yellow, the scales of dilemma zone were narrowed in case of stopping cars by moving up the starting point of the dilemma zone due to lowered spot speed. On the other hand, in case of passing cars, the end points of dilemma zone were moved further out to the rear due to increased spot speed. Therefore, changing traffic signal locations could make an impact to increase intersection safety through reducing the scales of dilemma zone. This study also found that, in cases involving vehicles with similar approach speeds, spot speeds could be differentiated following the change of signal locations due to the fact that there can be greater differences in both braking point and deceleration rate. Thus, when considering the appropriate measuring of dilemma zone, 'spot speed' rather than 'approach speed' appeared to be more appropriate criterion.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1292-1294
• /
• 2002

In this study, the block section length of the given area has been analyzed to improve the headway which caused by the mixed operation of high speed trains and normal trains on the electrified railway of Dongdaegu to Busan. After establishing the average length of block section and the adjustable average length of block section of Dongdaegu to Busan, it is possible to perform the headway simulation regarding the signal system based on the established length. Although high speed trains as well as low speed trains including freight trains operate together, the experimental results indicate that the modification of the block section length shows the possibility of the improvement of headway.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.666-670
• /
• 2011

ATS(Automatic Train Stop)s are is effected by track environment, signal distance and train braking distance. So onboard signaling systems such as ATP(Automatic Train Protection) are installed on conventional lines by some train operation companies. With the mixed signalling, the onboard signaling system is overlaid on a conventional line with ATS, it is possible to run the line with conventional trains and ATP trains and to use the advantages of ATP(higher speed or more trains on the line). This paper includes guidelines a mixed signalling(ETCS and ATS) system architecture, operation concepts and infill balise installation.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1604-1611
• /
• 2011

Light Rail Transit(LRT) is a large scale complex system which combines rolling stocks, power supply, signal communication, tracks & stations, and hundreds of billions of wons per project are spent for construction. Therefore efficient integration of sub-systems is very important. The systems engineering is a good method to reduce the cost and risk of LRT project. In this paper, we introduce a research plan on the application of systems engineering to LRT project. We, Korea Railroad Research Institute(KRRI), launched a research program with 4 companies, which is support by the governmen and project period is 4.5 years. Main research topic is to develop the technology for the application of systems engineering technical process to LRT project based on ISO/IEC 15288.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2031-2036
• /
• 2011

To leading subway technology Advanced Urban Transit System is developed by national research and development. Next-generation trains equipped with direct driving permanent magnet traction motor and individually controlled propulsion system. Electromagnetic properties of the Next-Generation Train from four perspectives will be discussed. The first is closely related to human hazards that affect the 60Hz low frequency electromagnetic field. The Second is inductive noise that affect railroad signal system. The third is conductive noise that affect communication line near railroad. The 4th is radiation noise that may affect electronic equipment near the railroad tracks.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2286-2291
• /
• 2011

Technology on the rolling stock is very composition and system engineering. We have to consider to many parameters on the rolling stock design. High speed train is interface between rolling stock and infra system of rail, signal, communication etc. For many years testing operation has experienced substantial growth based on various advanced new technology. Recently some problems was clearly stated on effective management, practical use and testing operation of the the rolling stock on the technology change. This paper presents some results of the study on necessary requirements of the operation testing for rolling stock technology change. We propose a general plan to suggest the operation testing and the parameters of the rolling stock on the technology change in the text.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.632-634
• /
• 1996

In modern train systems, the high-speed and the high-density of train operation have been required. Effective train control systems need various information interchanged between the ground-site and on-board devices. So the systems are essential to the digital systems to admit lots of information and to raise the accuracy of transmission. In this paper, it is dealt with n bi-directional transmission of digital information between on-board devices and ground-site. Especially, this paper shows the experiment of bi-directional transmission of mass information by using transponder.