• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.836-842
• /
• 2005

This paper presents a power supply of railway signal system using a Z-source inverter. The Z-source inverter overcomes the conceptual and theoretical barriers and limitations of the tradition voltage-source inverter and current-source inverter and provides novel power conversion concept. The Z-source inverter is a Buck-Boost inverter that has a wide range of obtainable voltage.

• Journal of the Korean Society for Railway
• /
• v.13 no.5
• /
• pp.500-503
• /
• 2010

Until now, the track circuit with railroad which is a part of an electrical circuit wad used only for the detection of the train location, but as train speed is up to be higher, in order to overcome the limits of ground signal system the railway signal system has changed from the ground signal system to a cab signal system. The power source of the track circuit has also changed from a direct current or a high voltage impulse to an alternating current with high frequency which is a part of the audio frequency. To improve the maintenanability and according to the environment condition, the railway roadbed is rapidly changed to the ferroconcrete roadbed. In case of a track circuit to use an alternating current with high frequency as power source at a ferroconcrete roadbed, the characteristic of the track circuit is brought on a change from a loss of the magnetic combination instead of a leakage current from electric insulation which was caused by the reinforcing iron pod with lattice shape for durability. This paper is shown the influence and the loss of the signal current at AF track circuit on a ferroconcrete in the simulation sheets and presented a proposal for the preventive method from reduction of signal current.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.126-132
• /
• 2003

Recently with the rapid development in mobile communication, the mobile phone are utilized in many fields of railway system within country and abroad and its use tends to increase continuously. In the railway system, the applicable realm is spreaded to the fields of railway signal communication, railway operating, track maintenance, reservation and information service, also its role is expected to increase. In this thesis, we are surveying the usage application of home and abroad mobile phone in railway system. Studying the present condition of mobile communication in railway system, we are viewing the application plan and the direction of development.

• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.28-33
• /
• 2016

Since defects in the wheels of railway vehicles, which occur due to wears with the rail, cause serious damage to the running device, the diagnostic monitoring system for condition-based maintenance is required to secure the driving safety. In this paper, we studied to apply a useful Cepstrum analysis to detect periodic structure in spectrum among the vibration signal processing techniques for the fault diagnosis of a rotating body such as wheel. In order to analyze in variations of train velocity, the Cepstrum analysis was performed after a domain change of the vibration signal from time domain to rotation angle domain. When domains change, it is important to use a interpolation for a uniform interval of the rotation angle. Finally, the Cepstrum analysis for wheel flat detection was verified by using the vibration signal including the disturbance resulting from the rail irregularities and the vibration of bogie components.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.7
• /
• pp.1056-1060
• /
• 2012

Online monitoring system is becoming an essential element of railway traction system for utilized to condition based malignance management and various techniques currently employed in railway traction system. Among the various techniques, it is efficient to detect partial discharge signals by electromagnetic wave detection in order to detect insulation fault of rectifier. Although VHF (Very High Frequency), UHF (Ultra High Frequency) sensors were adopted to detect partial discharge of power facilities, due to characteristics of urban railway, excessive noise occurs from 500 MHz to 1.5 GHz on UHF bandwidth. In this paper a new measurement system able to monitoring the conditions of power facilities on DC substation in metro was studied and set up. The system uses UHF sensors to measure the partial discharge of the rectifier due to electric faulting and dielectric breakdown. Comparison and estimation for performance of SHF sensor which had devised to detect partial discharge signal of urban railway rectifier has conducted. In order to estimate performance of SHF sensor, we have compared the sensor with existing UHF sensor on sensitivity upon frequency bandwidth generated by pulse generator, and also we have verified performance of the SHF sensor by detection results of partial discharge signal from urban railway rectifier.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.287-290
• /
• 1998

Wheel impact due to the joint discontinuity is a major source of uncomfortable vibration in the railway vehicles. Since the impact signal is measured using sensors attached to the bogie and its energy content is small compared to the other vibrations from the machineries such as motors and gear systems, the seperation of the impact signal is generally difficult. In this study a technique using an evolutionary spectrum is proposed in order to estimate the impact signal due to the rail joint discontinuity.

• Journal of the Korean Society for Railway
• /
• v.2 no.2
• /
• pp.13-20
• /
• 1999

The vibration signals of driving parts of electric train are distorted its signal patterns due to the impact components, which occurs when wheel passes rail joints. An elimination method of the impact components is investigated using adaptive signal processing technique in this study The result shows that adaptive interference canceling method seems to be more effective than line enhancement technique. The application of adaptive interference canceling method to the signal measured at bogie shows that the extractions of the signals of driving parts of traction motor, reduction gear, and axle bearing are successful. Therefore, only the signals of bogie, which is the place to attach an accelerometer easily, is sufficient for the fault diagnosis and the safety evaluation of electric train. Also, adaptive interference canceling method can be applicable to evaluate the performance of vibration isolation between bogie and car body and to investigate the characteristics of indoor sound.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.739-746
• /
• 2016

The real-time railway safety monitoring and control system is for prevention of safety accidents, and this system adopts DDS (Data Distribution Service) standard based data transmission method to support integrated management of data from existing on-site safety detection devices. In this paper, we introduce the design of DDS-based data specification from on-site signal equipment on the conventional railway. For this, we (1) design UML data model of KRS SG 0062 standard which defines existing data specification, (2) define DDS Topics for DDS transmission and map KRS model to DDS Topic model, (3) suggest data transformation rules and (4) design network control QoS polices. In addition, we analysis actual on-site log data and validate our data specification design. DDS-based data transmission enables data compatibility among on-site devices and the real-time railway safety monitoring and control system, and allows efficient network management for a large amount of data transfer.

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.327-332
• /
• 2001

This paper proposes the system to describe the data transmission methods using the simply frequency transmission methods between a railway track and the train. This system can control the railway signals through the ABS or ATS system located in the train and stations, having the frequency about 433.92 MHz. It shows the advanced system to send a lot of data through the microprocessor installed in a transmitter and transmitter-receiver at the train and railway.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.418-423
• /
• 2003

Many countries in Asia have been researching for linking and activation of Asia transverse railway and we are trying to link Trans-Korean railway and Transcontinental railway. However we are confronted with a difficult question that the railway system of each country is different from each other-gauge, track formation and signal system. These problems will obstruct prior occupation of market because of loss of time and cost for trans vehicles and transshipment. In this paper, we tried to setting up development direction of Korean variable gauge vehicles by examine international development direction of variable gauge vehicles.