• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.603-612
• /
• 2009

The bogie hunting sensor detects accelerations of a bogie. It transmits those accelerations using frequency modulated signal to the TCMS(Train Control and Management System) electronics for functional processing. TCMS decide undesirable bogie hunting and high speed instability with frequency modulated signal. The bogie hunting sensor is essential component for safety driving of high speed train. The bogie hunting sensor's quality inspection before sensor is installed on bogie is very important. Therefore it is required equipment for exact inspection of train bogie hunting sensor. This study is about development of Bogie Hunting sensor's inspection equipment that we can improve Bogie Hunting sensor's quality. Accordingly, I suppose that this thesis will be utilized to improve the bogie hunting sensor's quality thru exact inspection.

• Proceedings of the KSR Conference
• /
• 2006.11a
• /
• pp.189-197
• /
• 2006

Maglev using EMS becomes unstable by unexpected big air-gap disturbance. The main causes of the unexpected air-gap disturbance are step-wise rail joint and large distance between rail splices. For the stable operation of the Maglev, the conventional system uses the threshold method, which selects one gap sensor among two gap sensors installed on the magnet to read the gap between magnet and guide rail. But the threshold method with a wide bandwidth makes the discontinuous air-gap signal at the rail joints because of the offset in air gap sensors and/or the step-wise rail joins. Further more, in the case of the one with a narrow bend-width, it makes Maglev system unstable because of frequent alternation. In this paper, a new method using fuzzy rule to reduce air-gap disturbances proposed to improve the stability of Maglev system. It treats the air-gap signal from dual gap sensors effectively to make continuous signal without air gap disturbance. Simulation and experiment results proved that the proposed scheme was effective to reduce air-gap disturbance from dual gap sensors in rail joints.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1694-1700
• /
• 2007

In the electrified section, both of return current and signal current are flowing in the same rail in common. But signal current shall be allowed to flow in the specific track circuit and not in the other circuit while the traction return current shall come back to power sub-station. This paper presents measuring system that use both sensor and antenna. The aim of the system is to achieve the difference in current between the two rails and the presence of trimming capacitors. In order to improve the transmission level, trimming capacitors are connected between the two rails at constant spacing. To maintain the balance of traction return current, rails of both sides may be jointed by the so-called SVPMM. The traction return current is sometimes unbalanced owing to the ill-contact of SVPMM. In this paper, we propose a diagnosis method based on a short-circuited current(Icc), trimming capacitors and traction return current measured by Korail inspection vehicles. Whether Icc is good or bad depends not only on the presence of trimming capacitors but also on the unbalance of the traction return current.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1168-1173
• /
• 2007

The Seoul Subway is one of the most heavily used Subway System in the world. It provides reliable transportation services, conveys nearly 4 million Passengers across 117 subway stations with a length of 134.9 Km. Over the years the safety for the Subway has been a major concern, trains going off the track, equipment failure, careless operation, Signal failure are increasing day by day. In a Recent Public opinion 40% said the causes to above facts are Vehicle breakdown because of Operators, Old rail defect, Quality of material. 20% of the opinion said the obstacles were because of Operation, crew carelessness, negligence in signal operation. In case of any accident the crew members cannot resolve the issue on site (Aid insufficiency), because of lack of knowledge and carelessness. The main obstacles for Subway are vehicle breakdown, Electric equipment failure, Signal Equipment failure, and Crew carelessness. This paper aims to provide major problems which are needed to be solved as quickly as possible for citizen's safety for a comfortable subway system making a comfortable ride and providing better service gradually.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.391-394
• /
• 2006

The paper deals with the experimental GNSS receiver built at the Czech Technical University for experiments with the real GNSS signal. The receiver is based on software defined radio architecture. Receiver consists of the RF front end and a digital processor based on programmable logic. Receiver RF front end supports GPS L1, L2, L5, WAAS/EGNOS, GALILEO L1, E5A, E5B signals as well as GLONASS L1 and L2 signals. The digital processor is based on Field Programmable Gate Array (FPGA) which supports embedded processor. The receiver is used for various experiments with the GNSS signals like GPS L1/EGNOS receiver, GLONASS receiver and investigation of the EGNOS signal availability for a land mobile user. On the base of experimental GNSS receiver the GPS L1, L2, EGNOS receiver for railway application was designed. The experimental receiver is also used in GNSS monitoring station, which is independent monitoring facility providing also raw monitoring data of the GPS, EGNOS and Galileo systems via internet.

• Journal of the Korean Society for Railway
• /
• v.19 no.6
• /
• pp.755-764
• /
• 2016

In this paper, to verify the field application of a displacement estimation technique based on the relationship between displacement and strain, static and dynamic field load test are performed on three-span continuous real bridge structures. The superstructure types of the test bridges are IPC girder highway bridge and steel box girder AGT bridge. LVDTs and strain gauges are attached to them; then, the responses due to test vehicle are measured. To obtain the displacement-strain relationship of the test bridges, the bridges are modeled as grillage system with 6 DOFs for the purpose of structural analyses. Static and dynamic displacements, which are estimated using both the calculated displacement-strain relationship and the measured strain signal, agree well with the values measured by LVDT. This study demonstrates that the displacement estimation technique using the strain signal can be effectively applied to the displacement measurement of bridge structures that cross rivers/roads/railways or have high clearance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.5
• /
• pp.1110-1116
• /
• 2017

Depending on the operating characteristics, track circuit is installed for the purpose of direct or indirect control of the signal device, point switch machine and other security device. These are mainly used for train detection, transmission of information, broken rail detection and transmission of return current. Especially, the return current is related to signal system, power system and catenary line, and track circuit systems. It is one of the most important component shall be dealt for the safety of track side staff and for the protection of railway-related electrical system according to electrification. Therefore, an accurate analysis of the return current is needed to prevent the return current unbalance and the system induced disorder and failure due to an over current condition. Also, if the malfunction occurred by the return current harmonics, it can cause problems including train operation interruption. In this paper, we presented measurement and analysis method at return current and it's harmonics by high speed train operation on the honam high speed line.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.122-128
• /
• 2012

Considering structure of depot, it is impossible to install the track circuit systems due to iron-beam. Because rails and earth are connected by the iron-beam, there is much leakage current. So, it is hard to apply the track circuit systems. Thus, when trains go to the depot, sign which indicates existence of trains is used manually. In case of wrong sign, accidents occur such as train crash, derailment etc. Currently, location of trains has been found by using optical sensor in the depot to prevent the accidents. However, it costs a great deal to install and maintain the optical sensor. Therefore, this method is hardly used in train operation institutes. In this paper, virtual track circuit systems are introduced by using software program in the depot. Also, algorithm of the virtual track circuit systems is proposed. In case that signal is handled to the depot which is occupied by the train, safety is ensured by indicating sign which means existence of trains and stop signal. Also, proper fault tolerance techniques are proposed to the software by analyzing reliability and availability.

• Journal of Environmental Science International
• /
• v.19 no.7
• /
• pp.917-929
• /
• 2010

This paper aims to find out the statistical characteristics of the weather related railroad accidents and incidents. Data from Korea Railroad Operation Information System(KROIS) and Korea Railroad Accidents reports during 1996-2008 were used to investigate the occurrence frequency of railroad accidents and operation obstacles and their association with weather phenomena. The results are as follows; The occurrence frequency of railroad accidents and operation obstacles decrease gradually, and most of railroad accidents is a railroad traffic accidents. The amount of damages by a railroad weather-related accidents is higher than those of the railroad accidents and operation obstacles. It was also found that weather events influencing the railroad weather-related accidents and incidents are rainfall, snowfall, lightning, winds. And they caused a railroad weather-related accidents and incidents, such as railway obstruction, signal failure, and power supply failure. Therefore we need research about threshold review and a quantitative and qualitative analysis of a railroad weather-related accidents and incidents according to climate change.

• International Journal of Railway
• /
• v.3 no.2
• /
• pp.39-45
• /
• 2010

The RF-CBTC (Radio Frequency-Communication Based Train Control) System is a communication system in railroad systems. The communication method of RF-CBTC system is the wireless between the wayside device and on-board device. The wayside device collects its location and speed from each train and transmits the distance from the forwarding train to the speed-limit position to it. The on-board device controlling device controls the speed optimum for the train. In the case of the RF-CBTC system used in Korea, transmission frequency is 2.4 [GHz]. It is the range of ISM(Industrial Scientific and Medical equipment) band and transmission of voice and data is performed by CDMA (Code Division Multiple Access) method. So noises are made in the AWGN (Additive White Gaussian Noise) and fading environment. Currently, the SNR (Signal to Noise Ratio) is about 20 [dB], so due to bit errors made by noises, transmission of reliable information to the train is not easy. Also, in the case that two tracks are put to a single direction, it is needed that two trains transmit reliable voice and data to a wayside device. But, by noises, it is not easy that just a train transmits reliable information. In this paper, we estimated the BER (Bit Error Rate) related to the SNR of voice and data transmission in the environment such as AWGN and fading from the RF-CBTC system using the CDMA method. Also, we supposed the SNR which is required to meet the BER standard for voice and data transmission. By increasing the processing gain that is a ratio of chip transmission to voice and data transmission, we made possible voice and data transmission from maximally two trains to a wayside device, and demonstrated it by using Matlab program.