• 한국철도학회논문집
• /
• 제6권2호
• /
• pp.100-107
• /
• 2003

This paper presents development of train performance simulation(TPS) program to analyze traction performance, braking performance and energy consumption for Korea high speed railway system. The conventional TPS program have some inconveniences such as DOS-based platform, user interface and limited function. The simulation technique model using scenario menu, various analysis function and object-oriented design/programming is presented. This simulation result have been compared with Alstom's for the Seoul-Pusan High Speed Rail Project.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1354-1359
• /
• 2008

In this paper, we propose a vision based passenger monitoring system for passenger's safety in railway station. Since 2005, Korea Railroad Research Institute (KRRI) has developed a vision based monitoring system, funded by Korean government, for passenger's safety in railway station. The proposed system uses various types of sensors, such as, stereo camera, thermal-camera and infrared sensor, in order to detects danger situations in platform area. Especially, detection process of the system exploits the stereo vision algorithm to improve detection accuracy. The paper describes the overall system configuration and proposed detection algorithm, and then verifies the system performance with extensive experimental results in a real station environment.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1315-1325
• /
• 2019

Aiming at the negative sequence and harmonic problems in the operation of railway static power conditioners, an optimization compensation strategy for negative sequence and harmonics is studied in this paper. First, the hybrid RPC topology and compensation principle are analyzed to obtain different compensation zone states and current capacities. Second, in order to optimize the RPC capacity configuration, the minimum RPC compensation capacity is calculated according to constraint conditions, and the optimal compensation coefficient and compensation angle are obtained. In addition, the voltage unbalance ${\varepsilon}_U$ and power factor requirements are satisfied. A PSO (Particle Swarm Optimization) algorithm is used to calculate the three indexes for minimum compensating energy. The proposed method can precisely calculate the optimal compensation capacity in real time. Finally, MATLAB simulations and an experimental platform verify the effectiveness and economics of the proposed algorithm.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.258-262
• /
• 2004

In this paper, the hazard factors on voltage rising effect between the rail and the earth were reviewed in subway system of AC traction line according to moving condition and location of the train. Site measuring of voltage rising between conductor part of train and station floor was performed to ascertain the risk level on the passenger. Plans for preventing hazard of rail-voltage rising and electrical shock on the passengers at platform were proposed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.870-873
• /
• 2011

철도 차량에서의 화재 발생 시 피난에서 차량에서 승강장이나 터널 같은 외부 환경은 매우 중요하다. 많은 인원이 탑승하게 되는 지하철과 그 승강장의 영향을 알아보기 위해, SIMULEX, PATHFINDER, STEPS를 시나리오에 적용 비교해 보았다. 대상차량은 서울에서 운행되는 차량을 기준으로 하였으며, 대상 승강장은 [도시철도 정거장 및 환승 편의시설 보완설계지침]을 기준으로 제작한 모델을 적용하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1616-1625
• /
• 2007

Recently, embedded systems role as control systems instead of mechanical control systems in many parts of vehicles. In cases that embedded systems are used controling the electric signal, it is important to secure the reliability of a software within embedded systems. In this paper, the test platform for securing the reliability and real-time characteristic of the embedded system that controls electric signal of All Wheel Steering Control System in a Bi-modal tram is proposed. The platform is built on a HIL (Hardware In the Loop) architecture. Through the HIL platform, various vehicle conditions, driver activities and environment conditions can be successfully tested without actual driving, hence improving the reliability of the embedded system for the All Wheel Steering Control System.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1278-1284
• /
• 2004

Platform screen dorr (PSD) is equipment composed of screens and doors on the platform of subways or light trains, separating the platform from the railroad. The equipment is opened and closed in connection to the doors of carriages. In order to operate the system safely, it is important to understand the characteristics of key parts. There are many parts and environmental factors such as voltage, current and temperature change but the present study measured the change rate of torque and energy changes according to the temperature of the driving motor and analyzed the characteristics of the changes and examined the features of a motor required for stable PDS and the conformability of control programs.

• 한국대기환경학회지
• /
• 제30권3호
• /
• pp.233-244
• /
• 2014

The objective of this study was to explore the characteristics of concentration of indoor air pollutants, such as $PM_{10}$, $CO_2$, and $NO_2$, measured by tele-monitoring system in a Seoul Metropolitan underground railway station from January 1, 2008 to December 31, 2012. The annual average concentration of indoor air pollutants actually varied over a wide range and was found to exhibit marked variation with time and measurement sites (tunnel inlet, platform, and concourse). After installing platform screen doors, the average $PM_{10}$ concentration on platform and concourse was decreased by 43.8% and 31.2%, respectively during the study periods. The relationship between the concentration of $PM_{10}$ and meteorological parameters (relative humidity and rainfall) or the Asian dust events was regarded as statistically significant. The correlations between the number of boarding/alighting passengers and $PM_{10}$, $CO_2$, and $NO_2$ were calculated. A p-value of less than 0.01 was regarded as significant except $NO_2$. The I/O ratio of $PM_{10}$ concentration was elevated after a congested time (about 08:00 am). The average I/O ratios of $NO_2$ were observed in concourse and platform on 03:00 am with $1.76{\pm}0.91$ and $1.50{\pm}0.51$, respectively. The average daily variation of standard excess rate of $PM_{10}$ and $NO_2$ concentration in concourse and platform was investigated. The highest standard excess rate was observed on 21:00 (09:00 pm).

• 한국ITS학회 논문지
• /
• 제12권2호
• /
• pp.22-29
• /
• 2013

기존의 승강장 안전문은 철도 차량의 출입문과 승강장 안전문이 1:1로 매칭이 되어야만 사용이 가능하기 때문에 다양한 열차가 정차하는 승강장에는 적용이 매우 어렵다. 이러한 문제를 해결하기 위해 제시된 승강장 안전문이 로프타입 상하개폐식 승강장 안전문(Rope type Platform Safe Door : RPSD)이다. 로프타입 상하개폐식 승강장 안전문은 승강장 안전문이 위에서 아래로 닫히고 승강장 안전문의 상하 이동을 위한 기둥은 20~40m 간격으로 설치되기 때문에 열차의 길이 및 출입문 위치, 출입문 개수와 상관없이 다양한 열차가 혼용하여 사용할 수 있도록 설계되었다. 본 논문에서는 다양한 열차가 정차하는 영등포역 일반열차 승강장에 기존 PSD 및 RPSD의 적용이 가능한지를 시뮬레이션을 통해 검토하였다. 검토결과 기존의 PSD는 시공, 안전, 비용상 문제가 발생할 것으로 파악되었으나, RPSD의 경우에는 적용에 큰 문제가 없는 것으로 나타났다.

• 전기학회논문지P
• /
• 제60권3호
• /
• pp.110-113
• /
• 2011

Platform Screen Door, PSD, is a device that seeks to prevent accidents with regards to falling off the platform and getting trapped between the trains, achieve improvements on the cleanliness of the air, address the accessibility issue of the disabled and the elderly and provide fresher environment on the platform in general. This is achieved by preventing health hazards and accidents from occurring through installation of fixed and moving doors between rail, tram and subway platforms and the railway. Domestic firms have achieved domestic production to a large degree in various Control Units including the Overall Control Unit and RF devices through investments in technology. Despite this, full domestic production of the core of the PSD system, Door Control Unit, DCU, is not yet achieved, having to install PSDs in a relatively short period of time. Currently, controllers with DC motors are developed for installation or one is faced with having to import foreign produced controllers. In this research, the control unit prototype using the BLDC motor was domestically produced. The performance of the control unit was rigorously tested through installation on Eun-Ha Rail on Wol-Mi Island.