• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.493-501
• /
• 2016

본 연구에서는 급곡선과 급구배가 많은 산악 도로 상의 궤도에서 운행할 수 있는 산악트램의 추진시스템 핵심 기술을 개발하였다. 국내 산악 관광지는 겨울철 폭설과 결빙에 의해 교통이 통제되고 있어 지형 조건 뿐만 아니라 기후 조건에도 무관한 산악철도가 필요하다. 먼저, 일반적인 120‰ 구배 등반에 소요되는 견인전동기 출력을 고려하여 추진시스템을 설계하였으며, 추진장치 설치 공간을 고려하여 동력 전달 계통을 설계하고 감속기 및 동력 전달축을 개발하였다. 급구배 상승을 위해 필요한 랙앤피니언 추진장치의 강체 접촉에 의한 진동 소음을 줄이기 위해 탄성 피니언을 개발하여 적용하였으며, 충격 비교 시험을 통해 기존 강체 피니언에 비해 진동이 1/3이하로 감소됨을 확인하였다. 반경 10m의 급곡선을 운행할 수 있도록 개별 회전 차륜 차축을 개발하였다. 또한 급구배 주행중 제동력 향상을 위해 밴드 제동장치를 개발하였으며, 제동력 시험을 통해 요구 제동력을 발휘할 수 있음을 확인하였다. 개발된 주요 부품은 시험을 통해 성능을 검증하였고, 최종적으로 급구배 및 급곡선 운행 대차시스템에 적용된다.

• 한국재난정보학회 논문집
• /
• 제14권4호
• /
• pp.458-465
• /
• 2018

연구목적: 철도 안전에 영향을 미치는 콘크리트 궤도는 이미지분석 기술을 사용하여 균열을 감지 할 수 있으나 균열을 검출하기 위한 콘크리트 궤도 및 표면 오염의 조건이 균열검측에 방해되므로 이를 효과적으로 제거하기 위한 방법이 필요하다. 연구방법: 본 연구에서는 한국 철도의 균열을 효과적으로 감지하기 위한 이미지 분석 기법을 적용한 프로세스를 제안하고 실험 모듈을 통해 취득된 이미지를 분석하여 성능을 검증하였다. 또한, 우리는 제안된 Gabor Filter Bank 기법을 사용하여 철도 콘크리트 도상 이미지를 획득한 데이터 중 무작위로 선택된 2000개의 이미지를 개발된 프로세스를 통해 자동 균열 검측을 수행하여 타당성을 검토하였다. 연구결과: 연구에서 제안된 시스템으로 균열 검측 결과 탐지율이 약 94% 성능으로 검토되었으며 취득된 철도콘크리트도상이미지의 균열이 동일한 크기와 형식으로 일치하였다. 결론: Gabor Filter Bank를 사용한 균열 검측법은 한국 철도의 콘크리트 궤도도상에 노이즈를 포함한 균열 이미지에 효과적으로 분석되는 것을 확인 할 수 있었다. 이 시스템은 기존의 인간 위주의 철도 산업에서 자동화 된 유지 관리 시스템이 될 수 있을 것으로 기대된다.

• 화약ㆍ발파
• /
• 제31권2호
• /
• pp.25-31
• /
• 2013

본 시공사례는 "성남~여주 복선전철 제 O공구 노반건설공사"중 도로 하부통과 구간으로서 터널의 노선을 따라 진동 및 소음으로 인한 피해 영향권 내에 아파트, 도자기 생산공장 및 국도 등 주요 보안물건 등이 위치하고 있다. 특히, 터널 노선 12m 상부의 국도를 따라 도시가스관(${\varphi}500mm$)이 매설되어 있어, 진동허용기준(1.0cm/sec) 이하로 안전하게 굴착하기 위하여 전자발파 공법을 적용하였으며, 굴착에 따른 지반의 변위를 최대한 방지하기 위하여 정밀 진동제어와 함께 신속한 굴착 및 보강이 이루어짐으로서 안전하게 완료되었다.

• 한국소음진동공학회논문집
• /
• 제13권8호
• /
• pp.591-597
• /
• 2003

The oscillation of the fluid caused by external motions is called sloshing, which occurs in moving vehicles with contained fluid masses, such as the oil tankers, railroad cars, aircraft and rockets. Natural frequencies of fluid are much lower than that of solid structures, and the deformation caused by the excitation that is less than 1st natural frequency of fluid is very large. For the reason of that, sloshing characteristics under the ekcitation that is less than the 1st natural frequency must be studied prior to the consideration of natural frequencies of fluid. The experimental devices are constructed to simulate the translation motion. The rectangular tanks are made to study the sloshing characteristics under external excitation. The changes of water height are measured using an analogue camcorder and MPEG board, and those are compared to each other through a standard deviation. From the results of experiments, the sloshing is greatly influenced by the length of the rectangular tank than the width of that under the periodic translational motion in the length direction. The rapid amplification of sloshing by resonance is also confirmed experimentally.

• 비파괴검사학회지
• /
• 제33권3호
• /
• pp.283-288
• /
• 2013

This paper describes development of a high speed Doppler OFDI system for non-invasive vascular imaging. Doppler OFDI (optical frequency domain imaging) is one of the phase-resolved second generation OCT (optical coherence tomography) techniques for high resolution imaging of moving elements in biological tissues. To achieve a phase-resolved imaging, two temporally separated measurements are required. In a conventional Doppler OCT, a pair of massively oversampled successive A-lines is used to minimize de-correlation noise at the expense of significant imaging speed reduction. To minimize a de-correlation noise between targeted two measurements without suffering from significant imaging speed reduction, several methods have been developed such as an optimized scanning pattern and polarization multiplexed dual beam scanning. This research represent novel imaging technique using frequency multiplexed dual beam illumination to measure exactly same position with aimed time interval. Developed system has been verified using a tissue phantom and mouse vessel imaging.

• 한국소음진동공학회논문집
• /
• 제25권9호
• /
• pp.620-627
• /
• 2015

Long continuous bridge deck can become contracted considerably as temperature drops, which can lead to a large expansion of sleeper span at the end of it. Since this huge sleeper span then can cause problems both with safety of train operation and structural stability of tracks, it is necessary to take the issue into consideration systematically in the designing process of the bridge. In this paper, an evaluation process through the analysis of train-track interaction was presented which can basically review the effects of the expansion of sleeper span at the end of long continuous bridge deck on the safety of the train and the structural stability of the track. The analyses of the interaction between the light rail train and tracks were carried out targeting the sleeper span as a main parameter. The safety of train operation and structural stability of tracks in a light rail system due to the expansion of the sleeper span were evaluated by comparing the numerical results with the related criteria.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.127-132
• /
• 2004

The third double-track construction part of work, called Chung Ang Railroad line(Deok-So$\∼$Won-Ju) is in progress and the personal museum located 330m from the starting point of Pal-Dang Tunnel(length=4,470m) line in the canyon is to be effected by rock blasting during the tunnel excavation work, especially museum articles and building itself. This paper is the example of application suitable tunnel rock blasting pattern for excavation after the case study about the investigation and analysis of rock blasting noise pollution during tunnel excavation work. The museum is a three-story building, RC concrete structure and is located 17m from the top of the tunnel, in the center of the double-track line. Comparing estimate vibration frequency with site vibration one, it can be verified the reasonable rock blasting noise pollution as improving the application of tunnel excavation rock blasting pattern. The above pattern has been selected economically and effectively and applied to our construction field.

• 한국소음진동공학회논문집
• /
• 제22권10호
• /
• pp.925-931
• /
• 2012

The air-conditioner for railway vehicle should have vibration durability in order to operate normally in vehicle running situation. KS R 9144(vibration test methods for railway vehicle parts) is used to verify the vibration durability. The specifications of compressor, condenser and evaporator for air-conditioner in railway vehicle are standardized, but the shape and structure of pipe lines are not specified. Because the air-conditioner handler produces the pipe line arbitrarily, sometimes the pipe line is broken during the vibration durability test. In this research the cause identification and solution of pipe line breaking problem in during the vibration durability test were studied for air-conditioner of railway vehicle(diesel multiple unit). It was found that the natural frequency of pipe line is related to the pipe line breaking by experiment. A new pipe line shape was introduced by using FEA in order to avoid the resonance. The prototype new pipe line was applied to air-conditioner and the natural frequency was measured by experiment in order to verify the resonance avoidance. The vibration reduction of air-conditioner with new pipe line was reviewed by comparing to the air-conditioner with original one.

• 한국소음진동공학회논문집
• /
• 제22권10호
• /
• pp.1010-1019
• /
• 2012

Non-contact detection of internal defects in a rail using ultrasonic waves is discussed in this paper. Cracks in a rail may be the cause of a serious railway accident such as derailment if left undetected. Concurrent rail inspection method based on ultrasonic testing using piezoelectric transducers has several limitations as it should keep physical contact with the rail. This work suggests a non-contact detection of internal defects in a rail using ElectroMagnetic Acoustic Transducers (EMAT) which can produce and measure ultrasonic waves in a rail without any couplant. The EMATs for rail inspection are designed and fabricated and their working performance is verified through a series of experiments on various types of internal defects in test rails. The effect of lift-off between the transducers and the rail on the generated signals is also discussed.

• The Journal of the Acoustical Society of Korea
• /
• 제17권3E호
• /
• pp.43-46
• /
• 1998

Many of the active noise control system utilize a form of the least mean square(LMS) algorithm. This paper discusses the dependence of the convergence rate on the acoustic error path in the popular algorithm which is conventional "filtered-x LMS" and introduces new algorithm "constrained filtered-x LMS". The proposed method increase the convergence region regardless of the time-delay in the acoustic error path. In the algorithms, coefficients of the controller are adapted using the residuals of constrained structure which are defined in such a way that the control process become stationary. Advantages of constrained filtered-x LMS algorithm is illustrated by convergence analysis in the mean sense.