• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.4
• /
• pp.405-410
• /
• 2005

In this paper, the front radiuses of curvature of spherical spectacle lenses in the cosmetic and optical point of view are investigated and are calculated using Zinken-Sommer condition. The optical power of all spherical spectacle lens shows good quality at the test using autometic lensmeter. However the front radiuses of curvature of spherical spectacle lenses are quite different depending on the lens companies. The front radius of curvature of those lenses is larger than that calculated using Zinken-Sommer condition. We know that the front radius of curvature of commercial spectacle lens is emphasized more cosmetic aspect than optical point of view.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.373-378
• /
• 2000

An experimental investigation on the incipience of nucleate boiling in forced flow of water is performed as a verification and extension of previous analysis. The effects of the subcooling, Reynolds number and surface curvature on the onset of nucleate boiling(ONB) in a concentric annulus flow channel with smooth inner heating surface is investigated experimentaly. Through flow visualization, the boiling phenomenon was observed directly and the experimental results were examined to find ONB heat flux. The results show that the variation of heat flux at ONB is increased linearly as the Reynolds number and subcooling are increased. The effect of surface curvature is very great specially for a small radius when radius of the inner heating tube is increased, the heat flux at ONB is almost inversely increased for the range of this investigation. It is found that the effect of convex surface curvature on ONB heat flux is very significant for a small radius.

• Journal of Mechanical Science and Technology
• /
• v.18 no.1
• /
• pp.12-19
• /
• 2004

Using LSM (laser scanning method) , the radius of curvature due to thermal deformation in polyimide film coated on Si substrate is measured. Since the polyimide film shows viscoelastic behavior, i.e., the modulus and deformation of the film vary with time and temperature, we estimate the relaxation modulus and the residual stresses of the polyimide film by measuring the radius of curvature and subsequently by performing viscoelastic analysis. The residual stresses relax by an amount of 10％ at 100$^{\circ}C$ and 20% at 150$^{\circ}C$ for two hours.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.200-206
• /
• 2002

A new wiregrid modeling scheme is proposed for a curvature varying scatterer A 2-dimensional conducting elliptic cylinder is modelled by wires with the different size of radius considering the radius of curvature on the surface. The magnitude of the internal field in the conducting elliptic cylinder is used as an indicator to check the accuracy of solutions between two methods. Numerical results show that this new wiregrid model scheme can be reduced the number of wires and applied to enhance the accuracy of solutions for a curvature varying scatterer.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.6
• /
• pp.52-63
• /
• 1997

Non-circular gear has a good velocity ratio in high speed and heavy load without any slip, moreover, it can transmit various motion, using simpler structure than link and cam, automation mechainism. In case of designing and manufacturing non-circular gear. I suggest one of references in applying non-circular gear to industrial plant, and suitable range of application by pressure angle curvature and angle ratio

• Transactions of Materials Processing
• /
• v.16 no.6
• /
• pp.432-437
• /
• 2007

Sidewall curl is the curvature that results from non-uniform through-thickness strain present in the sheet stamping process which involves material flow over a die radius. In order to understand and control sidewall curl for tight fit-up tolerances, an analytical model that can provide a reliable measure for the amount of curl would be very helpful. In this study, a model is developed based on the moment-curvature relationship during bending-under-tension operations. The analytical model includes the variables of applied tensile force, the yield strength, the elastic modulus, the bending radius, and the sheet thickness, which are the primary factors affecting sidewall curl during sheet stamping operations. For the accuracy of analytical model, six possible deformation patterns are proposed on the basis of material properties and bending geometries.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.18-22
• /
• 2000

An experimental study was carried out to investigate the effect of nano-contact condition on the nano-adhesion phenomena. SPM(scanning probe microscope) tips with different radius of curvature were fabricated by a series of masking and etching processes. DLC(diamond-like carbon) and W-DLC (tungsten-incorporated diamond-like carbon) were coated on (100) silicon wafer by PACVD(plasma assisted chemical vapor deposition). Pull-off forces of Pure Si-wafer, DLC and W-DLC were measured with SPM(scanning probe microscope). Also, the same series of tests were carried out with the tips with different radius of curvature. Results showed that DLC and W-DLC showed much lower pull-off force than Si-wafer and Pull-off force increased with the tip radius.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.861-866
• /
• 1996

The Non-Circular Gears is more advantage than other machinery using link and cam in the automation equipment. We designed Non-Circular Gears for a velocity of inequalty rotational equipment according to the variation of pressure angle, radius of curvature etc., and studied about pitch curve.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.126.2-126.2
• /
• 2005

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.267-270
• /
• 1998

Unequal wheel-radius causes odometry errors which may be increased unbounded. This paper deals with the practical method for modification of wheel-radius through experiments. This can increase the robot's odometric accuracy. Experimental results are presented that show improvement of odometric accuracy.