• Journal of the Korea Institute of Building Construction
• /
• v.9 no.2
• /
• pp.47-54
• /
• 2009

Integrated construction site management using RFID(Radio Frequency Identification) and facility maintenance introducing USN (Ubiquitous Sensor Network) have been widely used in the mega construction project sites. But, the validation on performance of RFID systems after introducing those has not been carried out. Given that the use of RFID systems have been increased, the construction industry as well as other industries needs the evaluation of the RFID system. By regarding the necessities for evaluation, a research to the satisfaction and importance evaluation of RFID system from the end-users' view point for site management was conducted. Satisfaction-importance matrix of satisfaction standards and importance standards was created (organised) according to the analysis result of a survey, proposed improvement methods and analysis about the items presented by each region like areas of sustainable maintenance, maintenance, progressive improvement and priority improvement. The result would contribute to enhance the utilization of system and its performance.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.193-200
• /
• 2007

There is an advantage that RFID system is better than previous bar code system in storage ability and noncontact property. But, everyone can easily receive the transmitting information by using RF signal. So, there is a problem that system security and personal privacy are threatened. In this paper, I propose RFID system that is secure against attacks like eavesdropping, replay, spoofing and location tracking and can efficiently provide mutual authentication services between reader and tag. The proposed RFID system can be used in various sections of ubiquitous computing environment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.4
• /
• pp.64-71
• /
• 2008

SAW (Surface Acoustic Waves) ID (identification) tags have been designed and implemented for RFID (Radio frequency IDentification) systems. With SAW ID tag of pulse position encoding method, the data capacity increased 3 times compared with SAW ID tag of amplitude on/off method. Two different kinds of SAW ID tag receiver systems, heterodyne and homodyne receiver systems, were made. The direct conversion receiver showed better isolation property, 10 dB improvement than the heterodyne receiver to increase wireless interrogation distance.

• Journal of Communications and Networks
• /
• v.14 no.1
• /
• pp.34-39
• /
• 2012

Collisions between tags greatly reduce the identification speed in radio frequency identification (RFID) systems and increase communication overhead. In particular for an active RFID system, tags are powered by small batteries, and a large number of re-transmissions caused by collisions can deteriorate and exhaust the tag energy which may result in missing tags. An efficient collision-free arbitration protocol for active RFID systems is proposed in this paper. In this protocol, a new mechanism involving collision detection, collision avoidance, and fast tag access is introduced. Specifically, the pulse burst duration and busy-tone-detection delay are introduced between the preamble and data portion of a tag-to-reader (T-R) frame. The reader identifies tag collision by detecting pulses and transmits a busy tone to avoid unnecessary transmission when collision occurs. A polling process is then designed to quickly access the collided tags. It is shown that the use of the proposed protocol results in a system throughput of 0.612, which is an obvious improvement when compared to the framed-slotted ALOHA (FSA) arbitration protocol for ISO/IEC 18000-7 standard. Furthermore, the proposed protocol greatly reduces communication overhead, which leads to energy conservation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.9
• /
• pp.1027-1032
• /
• 2015

Using the radio wave, RFID(: Radio Frequency IDentification) wirelessly transmits the unique information saved in a tag attached on the specific object. In the construction area, the trend in using RFID for managing the input and inventory of the construction materials is upward. General management systems for the construction materials have only a function of identifying the tag attached on the construction materials, but the management system with a function of identifying and managing the location information of the construction materials employing RFID, for reusing it, is not actively developed. For the efficient reuse of the construction materials, in this paper, we propose the RFID system with a function of estimating and saving the location information of the specific construction materials, based on the estimated distances between the particular subs and reader. The proposed system consists of RFID reader, distance estimate, communication, and memory units.

• The KIPS Transactions:PartD
• /
• v.15D no.1
• /
• pp.73-86
• /
• 2008

Because of its capability of automatic identification of objects, RFID(Radio Frequency Identification) technologies have extended their application areas to logistics, healthcare, and food management system. Load balancing is a basic technique for improving scalability of systems by moving loads of overloaded middlewares to under loaded ones. Adaptive load balancing has been known to be effective for distributed systems of a large load variance under unpredictable situations. There are needs for applying load balancing to RFID middlewares because they must efficiently treat vast numbers of RFID tags which are collected from multiple RFID readers. Because there can be a large amount of variance in loads of RFID middlewares which are difficult to predict, it is desirable to consider adaptive load balancing approach for RFID middlewares, which can dynamically choose a proper load balancing strategy depending on the current load. This paper proposes an adaptive load balancing approach for RFID middlewares and presents its design and implementation. First we decide a performance model by a experiment with a real RFID middleware. Then, a set of proper load balancing strategies for high/medium/low system loads is determined from a simulation of various load balancing strategies based on the performance model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.451-459
• /
• 2007

RFID it reads information which is it writes, the semiconductor chip for and the radio frequency system which uses the hazard antenna it has built-in transmission of information it talks. Formation which is transmitted like this collection and America which it filtrates wey the RFID search service back to inform the location of the server which has commodity information which relates with an object past record server. The hazard where measurement analysis result the leader for electronic interference does not occur consequently together from with verification test the power level which is received from the antenna grade where it stands must maintain minimum -55dBm and the electronic interference will not occur with the fact that, antenna and reel his recognition distance the maximum 7m until the recognition which is possible but smooth hazard it must stand and and with the fact that it will do from within and and and 3-4m it must be used Jig it is thought.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.963-966
• /
• 2005

Recently, Ubiquitous Computing appeared to achieve service that is intelligence enemy without being courted in restriction that is time and space enemy based on developing computer network and Internet festinately. RFID (Radio Frequency Identification) technology that process information of tag that is attached in physical object by point technology that capacitate this Ubiquitous Computing through radio frequency identify is noted. Present RFID connection technologies are Auto-lD Lab and EPCglobal Inc. To center research for standardization progress. But, present RFID related researches connected with tag and leader are progressed vigorously and research about middleware or software description to service actuality tooth is insufficient misgovernment. In this treatise, therefore, characteristic of comparison and analyze about EPC network architecture proposed Auto-lD Lab and EPCglobal Inc. and conceptual application architectures had used existent application development and integration.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.1
• /
• pp.89-96
• /
• 2007

Radio Frequency Identification system based on EPC(Electronic Product Code) Network Environment can read or write information of tagged objects, using Rf signals without direct contact. This advantage which is to provide storage ability and contactless property is better than Bar-code system. Mobile RFID system which integrates Mobile system with RFID system will provide new additional service to users. However, an advantage for obtaining information of objects using RF signal causes personal privacy problem. In this paper, we propose techniques that can protect personal privacy based on mobile. Our scheme provides privacy protection of users and is more efficiently than another application service.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1606-1611
• /
• 2005

The goal of this paper is to develop a self localization of mobile robot using UHF RFID landmark. We present landmark, a location sensing archetype system that uses UHF Radio Frequency Identification (UHF RFID) technology for locating objects inside buildings. The major advantage of landmark is that it improves the overall accuracy of locating objects by utilizing the concept of reference tags. Based on experimental analysis, we demonstrate that passive UHF RFID is a viable and cost-effective candidate for indoor location sensing. We conduct a series of experiments to evaluate performance of the positioning of the landmark System. In the standard setup, we place RF Reader which has two antennas and 25 tags in our lab. This research uses the assumption-based coordinates (ABC) algorithm[3] for determining the localization of robot. Also, we show how Radio Frequency Identification (UHF RFID) can be used in robot-assisted indoor navigation for the visually impaired. The experiments illustrate that passive UHF RFID tags can act as reliable landmark that trigger local navigation behaviors to achieve global navigation objectives.