• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.324-324
• /
• 2006

In copolymerization of methyl acrylate (MA) and methyl methacrylate (MMA) with various ratios of MA to MMA and $[CuCl]/[PMDETA]/[PVAc-CCl_{3}]$ catalyst system in bulk at $80^{\circ}C$ via ATRP, several terpolymer with different copolymer composition, were synthesized. The atom transfer radical copolymerization of MA and MMA with macroinitiator, is very sensitive to molecular weight and its distribution. In this work it was possible to calculate the molecular weight of the terpolymers and show that it is close to the experimentally determined number average molecular weight from GPC.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.415-420
• /
• 2013

Effect of chemical substitution at the para-position of the thiophenoxyl radical has been theoretically investigated in terms of energetics, structures, charge densities and orbital shapes for the ground and first electronically excited states. It is found that the adiabatic energy gap increases when $CH_3$ or F is substituted at the para-position. This change is attributed to the stabilization of the ground state of thiophenoxyl radical through the electron-donating effect of F or $CH_3$ group as the charge or spin of the singly-occupied molecular orbital is delocalized over the entire molecule especially in the ground state whereas in the excited state it is rather localized on sulfur and little affected by chemical substitutions. Quantitative comparison of predictions based on four different quantum-mechanical calculation methods is presented.

• EDISON SW 활용 경진대회 논문집
• /
• 제2회(2013년)
• /
• pp.25-35
• /
• 2013

The intramolecular magnetic coupling constant (J) values of diradical-based magnet models (S1-S5) were studied using unrestricted density functional theory. The model systems were designed with series of oxoverdazyl radicals (o-Ver(N) and o-Ver(C)) linked through a benzene coupler. They were divided according to either connectivity of the radical (C or N) or geometrical topology (meta- and para-) of benzene coupler. Reasonable relationship was found between spin density distribution and sign of J value. With our results we determined ferromagnetic (positive J value) and antiferromagnetic (negative J value) interactions. J values were also calculated along the twisting movement by the scan of dihedral angles between the radical and the coupler. An overall trend was found as absolute value of J decreased over increasing torsion angles.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.633-635
• /
• 2007

To cope with increasing power demand in metropolitan area, the power system in Korea has equipped with unit generator of large capacity, high density and uneven distribution, and transmission line of long distance, large capacity and high voltage. As the power system growing up enormous, it has become difficult to maintain the standard voltage in case of radical fluctuation of load or severe change of voltage by power system fault for its weakness of responsive characteristics although the power condenser has been installed to solve the unstability by lack of reactive power. Consequently, we review harmonic wave production and control characteristics to solve unstability problem of voltage in northern metropolitan, to reduce transmission restriction cost and to minimize load shedding by relocation of SVC (Static Var Compensator), which is highly effective for improvement of responsive characteristics for radical voltage fluctuation.

• Macromolecular Research
• /
• 제16권3호
• /
• pp.238-246
• /
• 2008

A new strategy using protection-deprotection chemistry was used to prepare branched polymers using the ATRP method only. Among the several monomers with different protecting groups, vinyl benzyl t-butyloxy carbonate (VBt-BOC) and 4-methyl styrene (4-MeSt) could be polymerized successfully to form backbones using the ATRP method in a controlled fashion. The protected groups in the backbones were converted to alkyl bromides and used as initiating sites for branch formation. The benzyl t-butyloxy carbonate groups in the backbones containing VBt-BOC units were first deprotected to benzyl alcohol by trifluoroacetic acid, then converted to benzyl bromide by reacting them with triphenylphosphine/carbon tetrabromide. The benzyl bromide groups in the backbones containing 4-MeSt units could be generated by bromination of the methyl groups using N-bromosuccinimide/benzoyl peroxide. The structures of the prepared polymers were well-controlled, as evidenced by the controlled molecular weight as well as the narrow and unimodal molecular weight distribution.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.92-95
• /
• 2001

The dielectric breakdown of epoxy composites used for transformers was experimented and then its data were simulated by Weibull distribution probability. First of all, speaking of dielectric breakdown properties, the more hardener increased the stronger breakdown strength at low temperature because of cross-linked density by the virtue of ester radical. The breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised and the electric field is concentrated. In the case of filled specimens with treating silane, the breakdown strength become much higher Finally, from the analysis of weibull distribution, it was confirmed that as the allowed breakdown probability was given by 0.1[%], the applied field value needed to be under 21.5 [Mv/cm].

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 기술교육위원회 창립총회 및 학술대회 의료기기전시회
• /
• pp.43-46
• /
• 2001

The DC dielectric breakdown of epoxy composites used for transformer was experimented and then its data were simulated by Weibull distribution equation in this study. The more hardener increased the stronger breakdown strength at low temperature because of cross-linked density by the virtue of ester radical, and the breakdown strength of specimens with filler was lower than it of non-filler specimens because it was believed that the adding filler formed interface, charges were accumulated in it, the molecular mobility was raised, the electric field was concentrated, electrons were accelerated and then electron avalanche was early accomplished. From the analysis of Wei bull distribution equation, it was confirmed that as the allowed breakdown probability was· given by 0.1[%], the value of 'applied field was needed to be under 17.20[kV/mm].

• 한국기계연구소 소보
• /
• 통권15호
• /
• pp.91-103
• /
• 1985

In this paper, temperature distribution and thermal stress are investigated considering engine peak pressure and the time average temperature distribution in the piston under running conditions for the diesel engine. The induced stress are calculated by the Finite Element Method(FEM). The results obtained are summerized as follows. 1) The results calculated by the FEM present good agreement with other numerical solution in literature. 2) It is confirmed that maximum compressive stress are induced in the part of outside wall between the piston crown and the pin bush. 3) In the axial direction, the hoop stresses are changed its sigh at the portion of crown near the inner wall side 4)Large gradient of temperature is shown in the piston crown near the side wall in the axial direction, in the part between the piton crown and the pin bush in radical direction 5)in case of stress distribution of piston wall surface in the axial direction, the hoop stress is a little greater than axial stress, and the latter is greater than the radial stress

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.414-419
• /
• 2002

The dielectric breakdown of epoxy composites used for transformers was experimented and then its data were simulated by Weibull distribution probability. First of all, speaking of dielectric breakdown properties, the more hardener increased the stronger breakdown strength at low temperature because of cross-linked density by the virtue of ester radical. The breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised and the electric field is concentrated. In the case of (idled specimens with treating silane, the breakdown strength become much higher Finally, from the analysis of weibull distribution, it was confirmed that as the allowed breakdown probability was given by 0.1[%], the applied field value needed to be under 21.5 MV/cm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1200-1203
• /
• 2003

The dielectric breakdown of epoxy composites used for transformers was experimented and then its data were applied to Weibull distribution probability. First of all, speaking of dielectric breakdown properties, the more hardener increased, the stronger breakdown strength became at low temperature because of cross-linked density by the virtue of ester radical. The breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised and the electric field is concentrated. In the case of filled specimens with treating silane, the breakdown strength become much higher. Finally, according to Weibull distribution analysis, reducing breakdown probability of equipment insulation lower than 0.1% level requires the allowable field allowable field intensity values to be kept under 21.5 MV/cm.