• 한국산학기술학회논문지
• /
• 제1권1호
• /
• pp.83-90
• /
• 2000

의사결정단위의 효율성 평가 도구로 사용되는 DEA 모형은 효율적 프론티어를 구해 의사결정단위를 평가하는 모형이다. 효율적 프론티어상의 참조집합이 무엇이냐에 따라 평가 단위의 효율성과 비효율을 제거하기 위한 대안이 다르게 된다. 다목적 선형계획법에서 프론티어를 구하기 위해 사용되는 참조점 방법은 제약 조건과 목적함수 간의 상충관계를 고려하면서 자유롭게 효율적 프론티어를 찾아 주는 장점이 있다. 또한 그 구조가 DEA모형과는 유사하므로 DEA모형을 참조점 방법의 방식으로 재 표현할 수 있다. 의사결정자가 단지 방사형 투사만에 의한 효율성 분석에 만족하지 못하거나 의사결정자의 선호구조에 의해 곡면상의 다른 점을 가장 선호한다면 이 점을 기준으로 대상을 평가하는 것이 올바른 결과에 도달 할 수 있을 것이다. 따라서 본 연구에서 는 DEA모형을 참조점 방법에 따라 재해석하고 4 개의 의사결정단위로 이루어진 표본을 이용하여 다양한 유형의 DEA모형에 의한 효율성을 평가하고 참조점 방법에 의한 확장된 형태의 효율적 프론티어를 구한다. 이를 통해 참조점 방법이 DEA 모형의 적용과 해석에 있어 많은 도움을 줄 수 있다는 점을 보인다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제24권2호
• /
• pp.35-40
• /
• 2001

Performance of SPECT imaging systems which use a rotating gamma camera, are affected by characteristics of the detector-collimator assembly, the data acquisition method, and the filter used in imaging reconstruction. The purpose of this study Is to examine image qualifies of SPECT with different types of low energy collimators. The SPECT imaging system in this study is a digital gamma camera system GCA-901A(Toshiba) and a data processing unit Scintipac-700(Shimadzu). The four types of collimators compared are UHR(ultra high resolution), LEHR(low energy high resolution), LEGP(low energy general purpose), and I-123 PAR(Parallel), with 0.27, 0.66, 1.00, and 2.06 relative sensitivity, respectively. In this case of the same collimators, the spatial resolutions measured in the slice plane showed a slight difference in the FWHM values(mean values of UHR, LEHR, LEGP, and I-123 PAR were 11.3 mm, 13.6 mm, 15.8 mm, and 20.4 mm, respectively) between the center and the circumference of the field of view, in the radial direction, but a large difference in the tangential direction, with lower FWHM values(values of UHR, LEHR, LEGP, and I-123 PAR were 8.4 mm, 8.7 mm, 9.3 mm, and 10.8 mm at 12 cm from the center, respectively). In comparison of SPECT images with the four types of collimators, except for the I-123 PAR collimator, image qualities of UHR, LEHR, and LEGP collimators showed only a slight difference. From the point of for, it is expected that the LEGP collimator would be suitable for SPECT imaging with $^{99m}Tc$.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제8권11호
• /
• pp.251-262
• /
• 2019

본 논문에서는 뉴로모픽 칩에서 운영되는 RBF 네트워크를 다양한 형태로 제공하는 시뮬레이터를 제안한다. 뉴로모픽 칩의 RBF 네트워크를 학습할 때 시뮬레이터를 사용할 경우에는 시간은 단축되지만 다양한 형태의 알고리즘을 테스트하기 어렵다는 단점이 있다. 본 제안 시뮬레이터는 기존 시뮬레이터와 비교하여 4배 많은 종류의 네트워크 구조 모의실험이 가능하며 특히, 이중 레이어 구조를 추가로 제공한다. 이중 레이어 구조는 다중 데이터 입력 시 활용되도록 구성하였으며 성능 분석 결과, 본 이중 레이어 구조가 기존보다 더 높은 정확도를 보였다.

• 한국인터넷방송통신학회논문지
• /
• 제21권5호
• /
• pp.19-26
• /
• 2021

본 논문에서는 고출력 저손실의 도파관 공간결합 구조를 제안하였다. 제안하는 공간결합구조는 각 포트의 중심에서 원형 도파관을 통해 결합하는 방식으로 구현 하였다. 특히 도파관의 모드 중 전송 선로 손실이 가장 적은 TE01모드를 이용하여 저 손실을 구현하고, 새로운 모드 변환 방식을 적용하여 소형화를 이루었다. 또한 전계 분석을 통해 새로운 모드 변환 구조의 절연 파괴 전압을 계산하여 고출력에 적합함을 확인하였다. 최종 8-way 도파관 공간 결합기를 설계, 제작하여 삽입 손실은 0.4dB 이하 결합효율 97% 이상의 결과를 얻어 평면 결합 방식 대비 전기적 성능이 매우 우수함을 확인하였다.

• 농업과학연구
• /
• 제47권4호
• /
• pp.1109-1122
• /
• 2020

The aim of this study was to develop a marbling classification and prediction model using small parts of sirloin images based on a deep learning algorithm, namely, a convolutional neural network (CNN). Samples were purchased from a commercial slaughterhouse in Korea, images for each grade were acquired, and the total images (n = 500) were assigned according to their grade number: 1++, 1+, 1, and both 2 & 3. The image acquisition system consists of a DSLR camera with a polarization filter to remove diffusive reflectance and two light sources (55 W). To correct the distorted original images, a radial correction algorithm was implemented. Color images of sirloins of Hanwoo (mixed with feeder cattle, steer, and calf) were divided and sub-images with image sizes of 161 × 161 were made to train the marbling prediction model. In this study, the convolutional neural network (CNN) has four convolution layers and yields prediction results in accordance with marbling grades (1++, 1+, 1, and 2&3). Every single layer uses a rectified linear unit (ReLU) function as an activation function and max-pooling is used for extracting the edge between fat and muscle and reducing the variance of the data. Prediction accuracy was measured using an accuracy and kappa coefficient from a confusion matrix. We summed the prediction of sub-images and determined the total average prediction accuracy. Training accuracy was 100% and the test accuracy was 86%, indicating comparably good performance using the CNN. This study provides classification potential for predicting the marbling grade using color images and a convolutional neural network algorithm.

• 문화기술의 융합
• /
• 제7권1호
• /
• pp.662-667
• /
• 2021

진동 햅틱 피드백은 최신 터치 디스플레이의 주요한 기능으로, 화면의 인터페이스와 상호 작용할 때 사용자의 조작성 및 몰입감을 크게 향상시킨다. 본 연구에선 정전기력 기반의 메커니즘을 적용하여 강한 진동 출력을 생성할 수 있으면서도, 얇은 평판 타입으로 제작이 가능하여 중대형 디스플레이의 뒷면에 탑재하기에 적합한 진동 햅틱 액추에이터를 제안하고자 한다. 제안된 액추에이터는 방사형 판스프링에 매달려 전기적으로 접지된 Mass를 이격 되어 있는 상하의 전극에 의해 정전기력으로 상하로 교번하여 진동력을 증폭시킬 수 있는 구조로 개발되었다. 성능평가 결과, 개발된 액추에이터가 2개 내장된 Bar-Type 모듈에서 170 Hz에서 최대 3.3g의 우수한 진동 출력을 보여, 중대형 터치 디스플레이에서 햅틱 피드백 제공에 대한 가능성이 확인되었다.

• 한국전자통신학회논문지
• /
• 제17권5호
• /
• pp.767-774
• /
• 2022

본 논문에서는 우리나라에서 운용 중인 4개 제조사 윈드프로파일러의 성능 평가 및 품질관리의 방향성을 제시하기 위해 원시 스펙트럼 자료를 분석하였다. 계절별로 평균한 스펙트럼의 프로파일과 파워 스펙트럼 밀도(PSD, Power Spectrum Density)로 산출한 4가지 통계값(최소, 평균, 중앙, 최댓값)의 프로파일을 활용하였다. 스펙트럼 자료의 품질은 LAP-3000이 가장 우수하였고, YKJ3, PCL-1300, CLC-11-H가 뒤를 이었다. 철원과 추풍령에 설치된 PCL-1300은 지형과 비기상 신호로 인한 스펙트럼의 변동성이 커서 지형 클러터 제거와 이동평균, 멀티피크 등의 신호처리 과정이 요구되었다. 군산과 파주에 설치된 CLC-11-H는 직류 치우침과 전파거리 접힘 현상이 발견되어 직류 치우침 제거와 관측 유효 고도 제한이 선행될 필요가 있다.

• 한국산업보건학회지
• /
• 제32권4호
• /
• pp.359-370
• /
• 2022

Objective: This study is intended to design a commercially available passive sampler and conduct performance test on its use as a media for evaluating a working environment. Methods: This study was conducted to select adsorbents, design models, and evaluate storage stability and sampling rates for the development of new types of passive samplers. Results: The impurity detection, adsorbent capacity and breakthrough volume of five types of activated carbon were tested for selection of an adsorbent. One product was selected in consideration of the efficiency of purchase. A number of passive samplers were designed in a radial style and a badge style using plastic as a material. The final two prototypes were made using molds or 3D printing. For the storage stability evaluation, samples were stored at different temperature for 1~21 days and then analyzed. Most of the chemicals had excellent storage stability when refrigerated. However, some chemicals such as dichloromethane and methyl ethyl ketone need to be analyzed as soon as possible after sampling. Conclusion: In this study, new types of passive samplers for 66 chemical compounds were developed. The evaluation of storage stability and sampling rates showed different results depending on the properties of the chemical substance. For some chemicals such as methyl ethyl ketone and dimethylformamide, activated carbon is inappropriate as an absorbent. In future studies, additional experiments are required on chemicals that are difficult to collect with activated carbon.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2578-2590
• /
• 2023

In this work, a 24-month two-batch fuel management strategy for the APR1400 using LEU + has been investigated, where enrichments of 5.9 and 5.2 w/o are utilized in lieu of the conventional 4-5 w/o UO₂ fuel. In addition, an Accident Tolerant Fuel (ATF) clad based on the swaging technology is applied to APR1400 fuel assemblies. In this special ATF clad design, both outer and inner SS316 layers protect the conventional zircaloy clad. Erbia (Er₂O₃) is introduced as a burnable absorber with two-fold goals to lower the critical boron concentration in the long-cycle LEU + loaded core as well as to handle the LEU + fuel in the existing front-end fuel facilities without renewing the license. Two types of fuel assemblies with different loading of gadolinia (Gd₂O₃) are considered to control both the reactivity and the core radial power distribution. The erbia burnable absorber is uniformly admixed with UO₂ in all fuel pins except for the gadolinia-bearing ones. In this study, two core designs were devised with different erbia loading, and core performance and safety parameters were evaluated for each case in comparison with a core design without any burnable absorbers. The core analysis was done using the two-step method. First, cross-sections are generated by the SERPENT 2 Monte Carlo code, and the 3-D neutronic analysis is performed with an in-house multi-physics nodal code KANT.

• Steel and Composite Structures
• /
• 제49권5호
• /
• pp.487-502
• /
• 2023

In the realm of nanotechnology, the nonlocal strain gradient theory takes center stage as it scrutinizes the behavior of spinning cantilever nanobeams and nanotubes, pivotal components supporting various mechanical movements in sport structures. The dynamics of these structures have sparked debates within the scientific community, with some contending that nonlocal cantilever models fail to predict dynamic softening, while others propose that they can indeed exhibit stiffness softening characteristics. To address these disparities, this paper investigates the dynamic response of a nonlocal cantilever cylindrical beam under the influence of external discontinuous dynamic loads. The study employs four distinct models: the Euler-Bernoulli beam model, Timoshenko beam model, higher-order beam model, and a novel higher-order tube model. These models account for the effects of functionally graded materials (FGMs) in the radial tube direction, giving rise to nanotubes with varying properties. The Hamilton principle is employed to formulate the governing differential equations and precise boundary conditions. These equations are subsequently solved using the generalized differential quadrature element technique (GDQEM). This research not only advances our understanding of the dynamic behavior of nanotubes but also reveals the intriguing phenomena of both hardening and softening in the nonlocal parameter within cantilever nanostructures. Moreover, the findings hold promise for practical applications, including drug delivery, where the controlled vibrations of nanotubes can enhance the precision and efficiency of medication transport within the human body. By exploring the multifaceted characteristics of nanotubes, this study not only contributes to the design and manufacturing of rotating nanostructures but also offers insights into their potential role in revolutionizing drug delivery systems.