• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1613-1618
• /
• 2012

The wheel bearing is one of the important parts in a vehicle for translating power and bearing weight. When it is mounted on the knuckle by using bolts, the distortion of the outer ring including the seal mounting point and raceway occurs. In this study, a numerical analysis was performed to analyze the distortion of the outer ring by using a finite element method. The commercial software MSC.MARC was used for this purpose. Elastoplastic and contact analysis were carried out to compute the clamping behavior of the outer ring, bolts, and knuckle. Because the concavity on the flange of the outer ring affects the deformation, its effect was considered. To verify the reliability of this study, the roundness of the outer ring was measured. The experimental results were comparatively in agreement with the computational results.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.11
• /
• pp.1566-1573
• /
• 2014

Although most algae cultivation systems are operated in suspended culture, an attached growth system can offer several advantages over suspended systems. Algal cultivation becomes light-limited as the microalgal concentration increases in the suspended system; on the other hand, sunlight penetrates deeper and stronger in attached systems owing to the more transparent water. Such higher availability of sunlight makes it possible to operate a raceway pond deeper than usual, resulting in a higher areal productivity. The attached system achieved 2.8-times higher biomass productivity and total lipid productivity of $9.1g\;m^{-2}day^{-1}$ and $1.9g\;m^{-2}day^{-1}$, respectively, than the suspended system. Biomass productivity can be further increased by optimization of the culture conditions. Moreover, algal biomass harvesting and dewatering were made simpler and cheaper in attached systems, because mesh-type substrates with attached microalgae were easily removed from the culture and the remaining treated wastewater could be discharged directly. When the algal biomass was dewatered using natural sunlight, the palmitic acid (C16:0) content increased by 16% compared with the freeze-drying method. There was no great difference in other fatty acid composition. Therefore, the attached system for algal cultivation is a promising cultivation system for mass biodiesel production.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.4
• /
• pp.477-482
• /
• 1998

In the aquaculture industry, a photobioreactor (Pbr) with high productivity is a prerequisite for mass production of Chlorella sp., a feeding fry for Rotifer (Brachinous plicatilis). To enhance the productivity of Chlorella sp., model Pbrs such as Cylinder type, Spherical surface type, Half-spherical surface type, Plate type, Raceway pond type and Water-wheel type Pbr with different values of surface area exposed to light/culture volume (S/V) were manufactured, and the maximum specific growth rate (${\mu}_{max}$) and productivity of Chlorella vulgaris 211-11b at $25^{\circ}C$, pH 7.0 and 12,000 lux were compared each other. The ${\mu}_{max}$ and productivity were not proportional to S/V. Among the 6 model Pbrs, Half-spherical surface type Pbr showed the highest ${\mu}_{max}$ and productivity as 2.206 ($day^{-1}$) and 0.247($g^{{\ell}-1}day^{-1}$).

• Tribology and Lubricants
• /
• v.34 no.6
• /
• pp.254-261
• /
• 2018

In order to reduce resistance torque and energy loss, minimizing friction between race surface and rolling elements of a bearing is necessary. Recently, to reduce friction in bearing element, solid lubricant coating for the bearing raceway surface has been receiving much attention. Considering the operating conditions of real bearings, verifying the effect of solid lubricant coatings under extreme conditions of high load that is more than 1 GPa is necessary. In this study, we evaluated the friction and wear characteristics of SUJ2 bearing steels deposited by carbon-based coatings (Si-DLC, ta-C), $MoS_2$ and graphite. In case of $MoS_2$ and graphite coatings, different surface treatments were applied to the coatings to verify the effect of surface treatment. A pin-on-disc type tribotester was used to evaluate the tribological characteristics of the coatings. It was possible to quantitatively estimate the friction and wear characteristics of solid lubricant under dry and lubrication conditions. The carbon-based coatings improved the friction and wear properties of SUJ2 bearing steels under the high load condition, but $MoS_2$ and graphite coatings were not suitable for high load conditions due to its low hardness. Different friction and wear behaviors were found for different substrate surface treatment method. Also, it was confirmed that solid lubricant coatings had a more positive effect than just applying the lubricant for improving the tribological characteristics.

• Tribology and Lubricants
• /
• v.36 no.6
• /
• pp.371-377
• /
• 2020

In In this study, we compared the results of a ball bearing life prediction model based on rolling element loads with the results of fatigue life prediction of ball bearings when a stress-based contact fatigue life prediction technique is applied to the ball bearing. We calculate the load acting on each rolling element by the external load of the bearing and apply the result to the Lundberg-Palmgren (LP) theory to calculate ball bearing life based on the rolling element. We also calculate stress-based ball bearing life through contact and fatigue analyses based on contact modeling of the ball and raceway while considering the fatigue test results of AISI 52100 steel. In stress-based life prediction, we use three high-cycle fatigue-determination equations that can predict the fatigue life when multi-axis proportional loads such as rolling-slide contact conditions are applied. These equations are derived from the stress invariant and critical plane methods and the mesoscopic approach. Life expectancy results are compared with those of the LP model. Results of the analysis indicated that the fatigue life was predicted to be lower in the order of the Crossland, Dang Van, and Matake models. Of the three, the Dang Van fatigue model was found to be the closest to the LP life.

• Tribology and Lubricants
• /
• v.40 no.4
• /
• pp.111-117
• /
• 2024

Due to global CO₂ emission reductions and fuel efficiency regulations, the trend toward transitioning from internal combustion engine vehicles to electric vehicles (EVs) has accelerated. Consequently, the problem of EV failures has become a focal point of active research. The parasitic capacitance generated during motor-shaft rotation induces voltage that deteriorates the raceway and ball surfaces of bearings, causing electrical damage in EVs. Despite numerous attempts to address this issue, most studies have been conducted under high viscosity lubricant and low load conditions. However, due to factors such as high-speed operation, rapid acceleration and deceleration, motor heating, and motor system-decelerator integration, current EV applications have shown diminished stability in lubrication films of motor bearings, thereby leveraging the investigation to address the risk of electrical damage. This study investigates the electrical damage to rolling bearing elements in EV motor drive systems. The experimental analysis focuses on the effects of electric currents and operational loads on bearing integrity. A test rig is designed to generate high-rate voltage specific to a motor system's parasitic capacitance, and bearing samples are exposed to these currents for specified durations. Component evaluation involves visual inspections and vibration measurements. In addition, a predictive model for electrical failure is developed based on accumulated data, which demonstrates the ability to predict the likelihood of electrical failure relative to the duration and intensity of current exposure. This in turn reduces uncertainties in practical applications regarding electrical erosion modes.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.4
• /
• pp.294-303
• /
• 2008

Squid jigging fishery is very important in that there are about 1,000 jigging vessels more than 10 tonnage and about 5,000 ones less than 10 tonnage in Korea. But the cost of oil which is used to light fishing lamps, goes significantly up to almost one hundred million won for 50 tonnage vessels and forty million won in case of vessels less than 10 tonnage. This cost has almost taken 40% of total fishing costs. That is, the fishing business condition of squid jigging fishery is recently in the very difficult situation. As oil price increases, the business condition of the fishery gets worse and worse. Therefore it is very urgent to develop an economical fishing lamp, to solve this problem of fishery's business difficulty. This research aims at developing a fishing lamp for squid jigging fishery using the light emitting diode which has very excellent efficiency and durability. We made a water tank with 20 meters width which is a shape of raceway to research behavioral characteristics of Japanese flying squid to LED light, and made an experiment to investigate optimum wave of LED light to lure squid. The method is to establish LED lamps on both ends of water tank and to observe squid's behavior. Colors and wave lengths of LED lamps, used in experiment, are red(634nm), yellow(596nm), green(523nm), blue(454nm) and white(454nm+560nm). In experiment for attractive capability of LED lamp to squids, Japanese flying squid are highly attracted to blue lamp and white lamp. However, they are dispersed to red and yellow lamps. In addition, Japanese flying squid have moved and stayed in both dark ends of water tank. When compared intermittent lamp with continuous lamp, Japanese flying squid are highly attracted to intermittent lamp when intermittent interval is 0.25 second.

• Fisheries and Aquatic Sciences
• /
• v.21 no.9
• /
• pp.26.1-26.8
• /
• 2018

Inclusion effect of soybean meal (SBM) and fermented SBM (FSM) in extruded pellet for juvenile abalone (Haliotis discus) was compared in abalone farm. Dietary inclusion effect of the combined macroalgae (MA) (Undaria pinnatifida and Hizikia fusiforme) and a single Saccharina japonica on abalone was also compared. Three thousand six hundred juvenile abalone were purchased from a private hatchery and acclimated to the experimental conditions for 2 weeks. Six 5-ton flow-through raceway tanks were used, and abalone were randomly distributed into tanks (n = 600 per tank). Three experimental diets were prepared in duplicate. Fish meal, FSM, corn gluten meal, and shrimp meal and wheat flour and dextrin were used as the protein and carbohydrate sources, respectively, in the FSM diet. MA was also included in the FSM diet. FSM and MA in the FSM diet were substituted with SBM at the expense of wheat flour and S. japonica, referred to as the SBM and SJ diets. The experimental diets were pelletized by an extruded pelleter. Water stability of nutrients in the experimental diets was monitored at 12, 24, and 48 h after seawater immersion. The experimental diets were fed to abalone once a day to satiation with a little leftover for 120 days. The retained crude protein and lipid and ash content of the extruded pellets were changed over all period of time. Weight gain and specific growth rate (SGR) of abalone fed the SBM diet were greater than those of abalone fed the FSM and SJ diets. Weight gain and SGR of abalone fed the SJ diet were also greater than those of abalone fed the FSM diet. The longest shell length, widest shell width, highest shell height, and greatest soft body weight were obtained in abalone fed the SBM diet, followed by the SJ and FSM diets. Proximates of the soft body of abalone were not different among the experimental diets. In conclusion, SBM was a superior protein source to FSM in extruded pellet for growth performance of abalone. Dietary inclusion of a single S. japonica was superior to the combined inclusion of U. pinnatifida and H. fusiforme in the production of abalone.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.2
• /
• pp.121-124
• /
• 2007

Freshwater-adapted maturing chum salmon (Oncorhynchus keta) involuntarily captured by stationary nets in Yang-yang seashore areas were transferred to freshwater in an outdoor raceway tank at Yeongdong Inland Fisheries Research Institute, NFRDI, Yang-yang, Gangwon, Korea and kept over 1 day until the start of the experiments. The freshwater-adapted females were single-injected intraperitoneally with gonadotropin-releasing hormone analogue, (GnRH-a: $70\;{\mu}g/kg$ body weight, BW) alone or combined with a dopamine receptor antagonist, pimozide($700\;{\mu}g/kg$ BW). Although gonadosomatic indices [GSI, (gonad weight/BW)${\times}100$] did not show significant changes in both 2004 and 2005, GSI of GnRH-a-injected fish during the 2005 trial slightly increased on the 5th and 7th days post-injection compared to those of vehicle treated fish. Hepatosomatic indices [HSI, (liver weight/BW)${\times}100$] of fish injected with GnRH-a alone and combined with pimozide decreased significantly on the 7th day post-injection in 2004(P<0.05). In 2005 trials, HSI was significantly reduced in GnRH-a treated fish on the 7th day post-injection (P<0.05). Pimozide-injected fish showed a pattern with increase of GSI and decrease of HSI, without significant differences. Taken together, these results suggest that at least in part hypothalamic hormones and dopamine receptor antagonist may induce sexual maturation in freshwater-adapted maturing chum salmon. It remains to evaluate these preliminary results by further researches.

• Journal of Aquaculture
• /
• v.21 no.4
• /
• pp.339-345
• /
• 2008

Farming of the fleshy shrimp Fenneropenaeus chinensis which is a major cultured species in the west coast of South Korea, has been suffered :trom mass mortality due to disease epizootics including viruses. Since the Pacific white shrimp Litopenaeus vannamei was introduced to Korea in 2003, farming of this species has rapidly increased for years, occupying 62.5% of total cultured shrimp production in 2007. However the studies on L. vannamei culture methods for shrimp farming situations in Korea are very limited. Nursery culture of shrimp larvae has some advantages including increased survival, improved feed efficiencies, enhanced growth performance and reduced grow-out period. In this study, L. vannamei postlarvae (${PL_3}-{PL_{10}}$) with a density of $3,750-9,090/m^3$ were cultured in four raceways under limited water exchange condition for 35 days. Survival was the highest (93.6%) in tank stocked with $4,090/m^3$ and was the lowest in tank with $9,090/m^3$ (58.1 %). Mean body weight at harvest ranged from 0.071 to 0.108 g, and FCR was 0.59-0.70 in all tanks. Concentration of total ammonia nitrogen was increased up to 20 ppm on day 10 in all tanks and thereafter gradually decreased by the third week of culture. Nitrite-nitrogen was rapidly increased from the third week, representing bio-floc condition by developed nitrifying bacterial community. Of the present nursery system some modification of structure and consideration for commercial scale are needed in order to be implemented to shrimp farmers.