• Macromolecular Research
• /
• v.10 no.1
• /
• pp.34-39
• /
• 2002

Cure behavior of an epoxy resin was investigated at different cure temperatures (110, 120, 130, 140, and 150 $^{\circ}C$) and cure times in the presence of 2 wt% of an N-benzylpyrazinium hexafluoroantimonate (BPH) cationic catalyst by means of differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The glass transition temperature ( $T_{g}$) and chemical conversion (x) at the different temperatures were determined from DSC thermograms. The $T_{g}$ and x vs. In time data were superposed up to $T_{g}$ = 10$0^{\circ}C$ and x = 0.70 by shifting horizontally at a reference temperature of $T_{g}$ = 13$0^{\circ}C$. It is interesting that the $T_{g}$ and x of the superposed data increase rather slowly in the early stage of cure and rapidly thereafter. Therefore, the increase of the $T_{g}$ and x can be divided into two regions; $R_{I}$= -18.4(= $T_{go}$ ) ~5$^{\circ}C$ and $R_{II}$ = 5 ~ 10$0^{\circ}C$ in $T_{g}$, and $R_{I}$ : 0~0.24 and $R_{II}$ : 0.24~0.70 in x. The $R_{I}$ is closely related to the initiation reactions between BPH and epoxy and between hydroxy group and epoxy in this epoxy/catalyst system. From the kinetic analysis of the $T_{g}$-shift, activation energy was 12.5 kcal/mol. The relationship between $T_{g}$ and x was also considered. The gelation and vitrification times for different cure temperatures were obtained from DMA curves.urves. DMA curves.urves.

• Journal of the Korean Institute of Gas
• /
• v.21 no.6
• /
• pp.81-87
• /
• 2017

SOFC(Solid Oxide Fuel Cell) is one of the high-temperature fuel cells, SOFC system and Stack has a high temperature operating Characteristics. These Characteristics cause a lot of trouble in the design of the system and selection materials, securing durability, and securing safety performance. Therefore, For Commercialization and Supply of SOFC, the development of safety performance assessment techniques and evaluation systems should go together. In this study, we analyzed the evaluation items of SOFC Safety performance standards and risk factors of the stack for design of stack safety performance evaluation system. Based on the analyzed data, the evaluation item was deducted for design of stack safety performance evaluation system. Through the results of this study, we expect to facilitate the supply of SOFC and contribute to a safe use environment.

• The Korean Journal of Mycology
• /
• v.12 no.4
• /
• pp.164-169
• /
• 1984

Interspecific heterokaryons were obtained between auxotrophic mutants of Pleurotus ostreatus and Pleurotus florida by polyethylene $glycol-Ca^{++}$ induced fusion of somatic protoplasts. The fusion products produced colonies of dense growing mycelium after 10-14 days culture on hypertonic Mushroom Minimal Medium. When they were transferred to Mushroom Minimal Medium plates, the sectors showed normal vegetative morphology but the colonies of irregular shape varied in growth rate. All of the colonies produced fruit body of normal pilei. Some heterokaryon colonies bearing none or only a small amounts of basidiospores were isolated. Fusion products, generally, gave higher basidiocarp yields than the parents.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.425-430
• /
• 2019

This work describes the design and characterization of a X-band power amplifier (PA) monolithic microwave integrated circuit (MMIC) using a $0.25{\mu}m$ gate length gallium nitride (GaN) high electron mobility transistor (HEMT) technology. The developed X-band power amplifier MMIC has small signal gain of over 22.7 dB and saturated output power of 43.02 dBm (20.04 W) over the entire band of 9 to 10 GHz. Maximum saturated output power is a 43.84 dBm (24.21 W) at 9.5 GHz. Its power added efficiency (PAE) is 41.0~51.24% and the chip dimensions are $3.7mm{\times}2.3mm$, generating the output power density of $2.84W/mm^2$. The developed GaN power amplifier MMIC is expected to be applied in a variety of X-band radar applications.

• Journal of Life Science
• /
• v.34 no.4
• /
• pp.254-263
• /
• 2024

Korean jang is a food made using fermented soybeans, and the typical products include gochujang (GO), doenjang (DO), cheonggukjang (CH), and ganjang (GA). In this study, 16S rRNA metagenome analysis was performed on a total of 200 types of GO, DO, CH, and GA using next-generation sequencing to analyze the microbial community of fermented soybean foods and compare taxonomic (biomarker) differences. Alpha diversity analysis showed that in the CHAO index, the species richness index tended to be significantly higher compared to the DO and GA groups (p<0.001). The results of the microbial distribution analysis of the GO, DO, CH, and GA products showed that at the order level, Bacillales was the most abundant in the GO, DO, and CH groups, but Lactobacillales was most abundant in the GA group. Linear discriminant analysis effect (LEfSe) analysis was used to identify biomarkers at the family and species levels. Leuconostocaceae, Thermoactinomycetaceae, Bacillaceae, and Enterococcaceae appeared as biomarkers at the family level, and Bacillus subtilis, Kroppenstedtia sanguinis, Bacillus licheniformis, and Tetragenococcus halophilus appeared at the species level. Permutational multivariate analysis of variance (PERMANOVA) analysis showed that there was a significant difference in the microbial community structure of the GO, DO, CH, and GA groups (p=0.001), and the microbial community structure of the GA group showed the greatest difference. This study clarified the correlation between the characteristics of Korean fermented foods and microbial community distribution, enhancing knowledge of microorganisms participating in the fermentation process. These results could be leveraged to improve the quality of fermented soybean foods.

• Korean Journal of Materials Research
• /
• v.11 no.11
• /
• pp.978-985
• /
• 2001

The amorphous alumina was obtained by flash calcination of Bayer gibbsite[$Al(OH)_3$aluminum trihydroxide]. Rehydration and pore characteristics of $r-A1_2O_3$ prepared from rehydrated amorphous alumina were investigated. Crystal phases of pseudo-boehmite and bayerite were changed when amorphous alumina was hydrated at various conditions such as time, the ratio of water/alumina and pH. Specific surface areas and pore volumes of $r- A1_{2O}_3$ were influenced by the reaction time, water/alumina and PH of rehydration. The total pore volume of $r-A1_{2O}_3$increases with increasing the reaction time and ratio of water/alumina. Especially, the pure pseudo-boehmite of single phase could be prepared, when amorphous alumina was hydrated in the range of pH 6.5-8.0 in water/alumina= 10 at $90^{\circ}C$ for 7hr. The $r-Al_{2O}_3$, obtained by calcination of the prepared pseudo-boehmite at $500^{\circ}C$ for 2hrs, is characterized by the specific surface area of $265m^2$/g, total pore volume of $0.75cm^3$/g.

• The Korean Journal of Mycology
• /
• v.12 no.2
• /
• pp.53-58
• /
• 1984

This experiment was performed to select the most suitable species of oyster mush­room for cultivation during summer season in Korea. The selection was made based upon mycelial growth on the ricestraw substrates, fruiting under hot weather conditions during the summer season in Korea and potential high productivity using six cultures from South-east Asia. The newly selected strain of Pleurotus sajor-caju (ASI 2070) grew well on the rice straw substrates and produced the higher yields of sporophores than other cultures tested. The primordia of the mushroom were formed between 10 to $35^{\circ}C$. The optimal temperature for fruiting ranged from 20 to $25^{\circ}C$.

• The Korean Journal of Mycology
• /
• v.15 no.1
• /
• pp.19-22
• /
• 1987

This experiment was undertaken to investigate proper conditions for protoplast formation from Pleurotus spodoleucus. Novozym 234 was the most effective enzyme and a high yield of protoplasts was obtained. Combination of enzymes did not improve this result. Sucrose gave the best result to support the release and maintain the stability of protoplasts. The optimal reaction time of mycelium with the lytic mixture was 3 hrs. in shaking condition at 120 strokes $min-^1$. When mycelium of P. spodoleucus was cultured for 3 days on mushroom complete agar medium at $27^{\circ}C$, the formation of protoplasts was effective. The mushroom complete agar medium stabilized with 0.6 M sucrose was the most effective for reversion of protoplasts.

• The Journal of Korean Physical Therapy
• /
• v.26 no.2
• /
• pp.48-55
• /
• 2014

Purpose: The purpose of this study was to examine correlations among UPDRS, respiratory function, and senior fitness and to investigate the effects of restrictive respiratory function on these factors in Parkinson's disease patients. Methods: Subjects (n=25, Hoehn & Yahr (H&Y) stage: 2-3, $69.3{\pm}5.9$ yrs) from D Hospital Parkinson's Disease Center at Busan metropolitan area in the Republic of Korea volunteered for this study. They performed the pulmonary function test, UPDRS, and the senior fitness test. SPSS 18.0 was used for analysis of data, and the collected data were analyzed using Pearson's correlation coefficient (n=25). In addition, Independent t-test was used for determination of differences between two groups (between the normal pulmonary function group (n=10) and the restrictive pulmonary function group (n=10)). Results: Forced vital capacity (FVC (L)) showed significant negative correlation (r=-0.44, p<0.05) with H&Y stage in Parkinson's disease patients, and chair stand showed significant negative correlations (r=0.41, 0.43, 0.42, p<0.05) with FVC (L), FVC (%), and FEV1 (L). FVC (%) showed significant positive correlations (r=0.44, r=0.44, p<0.05) with right and left back scratch. In addition, the restrictive respiratory function group showed significantly lower FVC (%) (p<0.01) and was significantly slower (p<0.05) in the 8-foot up-and-go test than the normal respiratory function group. Conclusion: In conclusion, these results suggest that restrictive respiratory function in PD was related to H&Y stage. In addition, agility of PD patients was lower in the restrictive respiratory function group than in the normal function group.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.936-937
• /
• 2008

As a micro computer or micro processor technology has been advanced, the essential part which consists of electric power system has been changed into intelligent electronic device(IED), that is one kind of embedded system. There are already many parts changed into digital from analog in control and maintenance devices of electric system. These trends make advanced and novel concepts of devices and systems, that we couldn't even imagine in the analog circumstances. Now, the rate's of change is comparatively slower than IT field that is mainly represented by mobile communication, but that is a big change in the history of electric industries. Some people in those field called it Power-IT, and there have been many kinds of researches. Accelerated systems to go digital, users always and continuously demand more convenient, practical, and new functions. So, a lot of electric system manufactures have had tasks realizing many kinds of functions in an electronic device. According to the high-end technologies in semi-conductor and micro-computer field, manufactures can fully satisfy almost all of customer's needs, but there are other kinds of problems, such as large amount of program code, increasing complexity in proportion with program amount, and the hardness of maintenance and revision of the program. So nowadays, the necessity of embedded OS was emerged as a solution, and many researchers and manufactures have concentrated on studies related to embedded OS and its application.