• Economic and Environmental Geology
• /
• v.28 no.1
• /
• pp.43-51
• /
• 1995

The Jangsan Quartzite is a basal unit of the Cambro-Odovician sequence, in Socheon-Myeon, Bonghwa-Gun, Gyeongsangbug-Do, South Korea, was petrologically and geochemically investigated. The quartzite consists mainly of quartz and muscovite, assosiated with tourmaline and graphite. The quartzite shows white and/or gray color and various green color in hand specimens. The white and gray colored rocks have very low vanadium contents, but a dark green colored rock contains 8960 ppm vanadium. The muscovites in the quartzite show colorless and green color, of which green ones range from pale blue green to pale green. The dark green colored muscovites have above 8 wt. % vanadium and pale green ones have 1-3 wt. % vanadium. Vanadium contents in moscovite increase with decreasing $Al^{v1}$ contents. It suggests that vanadium substitutes for octahedral aluminium in moscovite. In general, it tends to large volumes of muscovite (up to 14 modal %) in deep green colored rocks, and high vanadium contents in their muscovites. Most of the moscovite flakes occur along the quartz boundaries and some are enclosed by quartz grain. The moscovite grains intergrowth each other in the former. The mouscovite aggragates are divided into two types on the basis of their intergrowth(cut) times. Two cut times and one cut time are named T type and D type, respectively. The T type is mainly distributed at western part (near of the Chunyang granite), whereas the D type is distributed from middle to estern part(near the Janggunbong) of the formation. The boundary is consistent with metamorphic isograd between andalusite and sillimanite zone by Ahn et. al. (1993).

• Economic and Environmental Geology
• /
• v.3 no.4
• /
• pp.199-222
• /
• 1970

One of the biggest sulfide metallic (Cu, Pb, Zn) ore deposits of South Korea is located in the area of Seo-myeon, Shiheung-gun, Gyeonggi-do. Geology of the region is mostly composed of metasediments of biotite schist, graphite schist, injection gneiss, sericite schist, limesilicate and quartzite from bottom, those are applicable to so-called Yeoncheon System of Pre-Cambrian, and granodiorite, quartz porphyry, basic dykes are outcroped in a small scope as intrusives. The origin of the ore deposit is pyrometasomatic contact deposits due to hydrothermal replacement and the ore bodies are imbedded in lower bed of limesilicate formation as impregnation and ore minerals are galena, sphalerite, marmatite, chalcopyrite, bornite, chalcocite, covellite, and the later two minerals are both hypogene and supergene. Gangue minerals are mostly skarn minerals those hornblende, diopside, epidote, hedenbergite, chlorite, garnet and quartz except primary calcite and quartz. Boundary plane (NS strike) between schists and limesilicate seemed to be primary opening of ore solution and fractures bearing $N50^{\circ}{\sim}80^{\circ}W$ are secondary structural control for localization of ore minerals and the third structural controls are both irregular gashes and schistosity in small scale. Photogeological study was carried with vertical aerial photo scaled 1: 38,000 and enlarged 1 : 10,000 under stereoscope. The study on the area convinced the fact that the geologic boundaries between rocks, limesilicates and quartzites, are traced easily by their typical topographic feature and drainage, and the main fracture patterns which derived from the result of fracture traces, that photogeologic lineament observed under stereoscope, are those bearing (1) $N20^{\circ}W$, (2) $N58^{\circ}W$, (3) $N76^{\circ}W$, (4) EW, (5) $N20^{\circ}W$, (6) $N62^{\circ}W$, (7) $N77^{\circ}W$. Among the written fractures, (5) (not schistosity, in case of fault) (6) (7) are post-mineral faults and others are pre-mineral faults and others are pre-mineral structures, and (2) (3) (6) (7) are coincided with statistical figure of 208 fractures surveyed in underground. By the result of the study, mineralized zone, are presumed to extend north and southward, total length about 4km.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.3
• /
• pp.185-197
• /
• 2023

The Gubong Au-Ag deposit consists of eight lens-shaped quartz veins. These veins have filled fractures along fault zones within Precambrian metasedimentary rock. This has been one of the largest deposits in Korea, and is geologically a mix of orogenic-type and intrusion-related types. Korea Mining Promotion Corporation drilled into a quartz vein (referred to as the No. 6 vein) with a width of 0.9 m and a grade of 27.9 g/t Au at a depth of -728 ML by drilling (No. 90-12) in the southern site of the deposit, To further investigate the potential redevelopment of the No. 6 vein, another drilling (No. 04-1) was carried out in 2004. In 2004, samples (wallrock, wallrock alteration and quartz vein) were collected from the No. 04-1 drilling core site to study the occurrence and chemical composition of Ti-bearing minerals (ilmenite, rutile). Rutile from mineralized zone at a depth of -275 ML occur minerals including K-feldspar, biotite, quartz, calcite, chlorite, pyrite in wallrock alteration zone. Ilmenite and rutile from ore vein (No. 6 vein) at a depth of -779 ML occur minerals including white mica, chlorite, apatite, zircon, quartz, calcite, pyrrhotite, pyrite in wallrock alteration zone and quartz vein. Based on mineral assemblage, rutile was formed by hydrothermal alteration (chloritization) of Ti-rich biotite in the wallrock. Chemical composition of ilmenite has maximum values of 0.09 wt.% (HfO₂), 0.39 wt.% (V₂O₃) and 0.54 wt.% (BaO). Comparing the chemical composition of rutile at a depth -275 ML and -779 ML, Rutile at a depth of -779 ML is higher contents (WO₃, FeO and BaO) than rutile at a depth of -275 ML. The substitutions of rutile at a depth of -275 ML and -779 ML are as followed : rutile at a depth of -275 ML Ba²⁺ + Al³⁺ + Hf⁴⁺ + (Nb⁵⁺, Ta⁵⁺) ↔ 3Ti⁴⁺ + Fe²⁺, 2V⁴⁺ + (W⁵⁺, Ta⁵⁺, Nb⁵⁺) ↔ 2Ti⁴⁺ + Al³⁺ + (Fe²⁺, Ba²⁺), Al³⁺ + V⁴⁺+ (Nb⁵⁺, Ta⁵⁺) ↔ 2Ti⁴⁺ + 2Fe²⁺, rutile at a depth of -779 ML 2 (Fe²⁺, Ba²⁺) + Al³⁺ + (W⁵⁺, Nb⁵⁺, Ta⁵⁺) ↔ 2Ti⁴⁺ + (V⁴⁺, Hf⁴⁺), Fe²⁺ + Al³⁺ + Hf ⁴⁺ + (W⁵⁺, Nb⁵⁺, Ta⁵⁺) ↔ 2Ti⁴⁺ + V⁴⁺ + Ba²⁺, respectively. Based on these data and chemical composition of rutiles from orogenic-type deposits, rutiles from Gubong deposit was formed in a relatively oxidizing environment than the rutile from orogenictype deposits (Unsan deposit, Kori Kollo deposit, Big Bell deposit, Meguma gold-bearing quartz vein).

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.4
• /
• pp.273-288
• /
• 2023

The Gubong Au-Ag deposit, which has been one of the largest deposits (Unsan, Daeyudong, Kwangyang) in Korea, consists of eight lens-shaped quartz veins (a mix of orogenic-type and intrusion-related types) that filled fractures along fault zones within Precambrian metasedimentary rock. Korea Mining Promotion Corporation found a quartz vein (referred to as the No. 6 vein with a grade of 27.9 g/t Au and a width of 0.9 m) at a depth of -728 ML by drilling (No. 90-12) conducted in 1989. Korea Mining Promotion Corporation conducted drilling (No. 04-1) in 2004 to investigate the redevelopment's possibility of the No. 6 vein. The author studied the occurrence and chemical composition of chlorite and white mica using wallrock, wallrock alteration and quartz vein samples collected from the No. 04-1 drilling core in 2004. The alteration of studied samples occurs chloritization, sericitization, silicification and pyritization. Chlorite and white mica from mineralized zone at a depth of -275 ML occur with quartz, K-feldspar, calcite, rutile and pyrite in wallrock alteration zone and quartz vein. Chlorite and white mica from ore vein (No. 6 vein) at a depth of -779 ML occur with quartz, calcite, apatite, zircon, rutile, ilmenite, pyrrhotite and pyrite in wallrock alteration zone and quartz vein. Chlorite from a depth of -779 ML has a higher content of Al and Mg elements and a lower content of Si and Fe elements than chlorite from a depth of -275 ML. Also, Chlorites from a depth of -275 ML and -779 ML have higher content of Si element than theoretical chlorite. Compositional variation in chlorite from a depth of -275 ML was mainly caused by phengitic or Tschermark substitution [Al^{3+,VI + Al3+,IV} <-> (Fe²⁺ or Mg²⁺)^VI + (Si⁴⁺)^IV], but compositional variation from a depth of -779 ML was mainly caused by octahedral Fe²⁺ <-> Mg²⁺ (Mn²⁺) substitution. The interlayer cation site occupancy (K+Na+Ca+Ba+Sr = 0.76~0.82 apfu, 0.72~0.91 apfu) of white mica from a depth of -275 ML and -779 ML have lower contents than theoretical dioctahedral micas, but octahedral site occupancy (Fe+Mg+Mn+Ti+Cr+V+Ni = 2.09~2.13 apfu, 2.06~2.14 apfu) have higher contents than theoretical dioctahedral micas. Compositional variation in white mica from a depth of -275 ML was caused by phengitic or Tschermark substitution [(Al³⁺)^VI + (Al³⁺)^IV <-> (Fe²⁺ or Mg²⁺)^VI + (Si⁴⁺)^IV], illitic substitution and direct (Fe³⁺)^VI <-> (Al³⁺)^VI substitution. But, compositional variation in white mica from a depth of -779 ML was caused by phengitic or Tschermark substitution [(Al³⁺)^VI + (Al³⁺)^IV <-> (Fe²⁺ or Mg²⁺)^VI + (Si⁴⁺)^IV] and direct (Fe³⁺)^VI <-> (Al³⁺)^VI substitution.

• Economic and Environmental Geology
• /
• v.43 no.5
• /
• pp.443-453
• /
• 2010

The Samsung gold-silver deposit consists of quartz veins that fill along the fault zone within Cretaceous shale and sandstone. Mineralization is occurred within fault-breccia zones and can be divided into two stages. Stage I is main ore mineralization and stage II is barren. Stage I is associated with wall-rock alteration minerals(sericite, pyrite, chlorite, quartz), rutile, base-metal sulfides(pyrrhotite, pyrite, sphalerite, chalcopyrite, galena), and electrum. Stage II occur quartz, calcite and pyrite. Fluid inclusion data indicate that homogenization temperatures and salinities of stage I range from 145 to $309^{\circ}C$ and from 0.4 to 12.4 wt.% NaCl, respectively. It suggests that hydrothermal fluids were cooled and diluted with the mixing of meteoric water. The main deposition of base-metal sulfides and electrum occurred as a result of cooling and dilution at temperature between $200^{\circ}C$ and $300^{\circ}C$. Sulfur(9.3~10.8‰) isotope composition indicates that ore sulfur was mainly derived from a magmatic source as well as the host rocks. The calculated oxygen[-2.3~0.9‰(quartz: 0.3‰, 0.9‰, calcite: -2.3‰)] and hydrogen[-86~-76‰(quartz: -86‰, -82‰, calcite: -76‰)] isotope compositions indicate that hydrothermal fluids may be meteoric origin with some degree of mixing of another meteoric water for paragenetic time.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.5
• /
• pp.179-184
• /
• 2018

To lessen oxygen concentrations in a wafer through modifying the length of graphite heaters, we investigated the influence of relative distance from heater to quartz crucible on temperature profile of hot-zone in Czochralski silicon-crystal growth by simulation. In particular, ATC temperature and power profiles as a function of different ingot body positions were investigated for five different heater designs; (a) typical side heater (SH), (b) short side heater-up (SSH-up), (c) short side heater-low (SSH-low), (d) bottom heater without side heater (Only-BH), and (e) side heater with bottom heater (SH + BH). It was confirmed that lower short side heater exhibited the highest ATC temperature, which was attributed to the longest distance from triple point to heater center. In addition, for the viewpoint of energy efficiency, it was observed that the typical side heater showed the lowest power because it heated more area of quartz crucible than that of others. This result provides the possibility to predict the feed-forward delta temperature profile as a function of various heater designs.

• Geosciences Journal
• /
• v.22 no.6
• /
• pp.881-889
• /
• 2018

The Geodo skarn deposit is located in the Taebaeksan Basin, central eastern Korean Peninsula. The geology of the deposit consists of Cambrian to Ordovician calcareous sedimentary rocks and the Cretaceous Eopyeong granitoids. The skarns at Geodo occur around the Eopyeong granitoids, which consist, from early to late, of magnetite-bearing equigranular quartz monzodiorite, granodiorite, and dykes. These dykes emanated randomly from equigranular granodiorite and some of dykes spatially accompany skarns. Skarn Fe mineralization, referred as Prospect I and II in this study, is newly discovered beyond previously known skarns adjacent to the quartz monzodiorite. These discoveries show a vertical and lateral variation of skarn facies, grading from massive reddish-brown garnet-quartz in a lower and proximal zone to banded in an upper and distal zone, reflecting changes in lithofacies of the host rocks. Skarn veins in distal locations are parallel to sedimentary laminae, suggesting that lithologic control is important although proximal skarn has totally obliterated primary structures, due to intense retrograde alteration. Skarns at Geodo are systematically zoned relative to the causative dykes. Skarn zonation comprises proximal garnet, distal pyroxene, and vesuvianite (only in Prospect I) at the contact between skarn and marble. Retrograde alteration is intensely developed adjacent to the contact with dykes and occurs as modification of the pre-existing assemblages and progressive destruction such as brecciation of the prograde assemblages. The retrograde alteration assemblages consist predominantly of epidote, K-feldspar, amphibole, chlorite, and calcite. Most of the magnetite (the main ore mineral), replaces calc-silicate minerals such as garnet in the lower proximal exoskarn, whereas it occurs massive in distal pyroxene and amphibole in the upper and distal exoskarn. The emanation of dykes from the equigranular granodiorite has provided channelways for ascent of skarn-forming fluids from a deep source, whereas the style and nature of skarns suggest that originally structurally-controlled skarn-forming fluids may migrate long distances laterally to produce skarn in calcareous sedimentary rocks.

• The Journal of Engineering Geology
• /
• v.18 no.2
• /
• pp.145-152
• /
• 2008

A fault gouge zone which is about 25cm thick crops out along a small valley in Yangbuk-myeon, Gyeongju city. It is divided into greenish brown gouge and bluish gray gouge by color. Under the microscope, the gouges have a lot of porphyroclasts composed of old gouge fragments, quartz, feldspar and iron minerals. Clay minerals are abundant in matrix, defining strikingly P foliation by preferred orientation. Microstructural differences between bluish pay gouge and greenish brown gouge are as follows: greenish brown gouge compared to bluish gray gouge is (1) rich in clay minerals, (2) small in size and number of porphyroclasts, and (3) plentiful in iron minerals which are mostly hematites, while chiefly pyrites in bluish gray gouge. Hematites are considered to be altered from pyrites in the early-formed greenish brown gouge under the influence of hydrothermal fluids accompanied during the formation of bluish gray gouge that also precipitated pyrites. It is believed that the fault core including bluish gray gouge zone and greenish brown gouge zone was formed by progressive cataclastic flow. In the first stage the fault core initiates from damage zone of early faulting. In the second stage damage zone actively transforms into breccia zone by repeated fracturing. The third stage includes greenish brown (old) gouge formation in the center of the fault core mainly by particle grinding. In the third stage further deformation leads to the formation of new (bluish gray) gouge zone while old gouge zone undergoes strain hardening. Consequently, the whole gouge zone in the core widens.

• Economic and Environmental Geology
• /
• v.51 no.3
• /
• pp.213-222
• /
• 2018

Metasediment-hosted Pb-Zn mineralized zone has been found in Dyusembay of Kazakhstan. Its petrological properties, metal index, alteration index and redox-sensitivity are compared with those of SEDEX type deposit. Mineralization is developed along foliation of host rock (graphitic phyllite) and controlled by folds and faults; major ore minerals including pyrite, pyrrhotite, sphalerite, and galena are disseminated or interlayered with fine-grained quartz. The margin of the mineralized zone is metamorphosed accompanying sericite and chlorite. Hydrothermal brecciation and Pb-Zn mineralization formed in quartz-calcite stockworks are confirmed at the around of Maytyubin granitoid intrusions. The mineralization is classified into three types according to those of occurrence, paragenesis, chemical composition and isotopic characteristics. Type 1 whose fine-grained pyrite, pyrrhotite and sphalerite are formed in parallel yet discontinuous to well-developed foliations of the host rock; its geochemistry is similar to those of the earlier stage in SEDEX-type mineralization. In case of type 2, the ore minerals of which are concentrated being parallel to a foliation by regional metamorphism, and most of them associated with quartz and muscovite (${\pm}$ biotite) paragenetically. Type 3 is formed in the hydrothermal breccia zone whose ore minerals are controlled by foliation and breccia and developed in quartz ${\pm}$ calcite veins having a form such as stratification, stockwork or veinlets. Host rocks in the mineralized zone indicate homogeneous metamorphic grade and there is no specific alteration zonation. Also, all types (type 1, type 2, and type 3) represent similar REEs patterns, it can be interpreted that these are originated from a same source. Sulphides occurred in mineralized zone indicate a limited range of sulphur isotope values (type 2, ${\delta}^{34}S=-13.3{\sim}-11.7$‰; type 3, ${\delta}^{34}S=-13.9{\sim}-8.2$‰), and a result of geothermometry presents different temperature ranges: type 2($251{\pm}38^{\circ}C{\sim}277{\pm}40^{\circ}C$); type 3($360{\pm}2^{\circ}C$ to $537{\pm}29^{\circ}C$). It is estimated to be due to the effect of metamorphism and Maytyubin granitoid intrusions, respectively. In addition, ternary chart of thorium, scandium, and zircon for discrimination of tectonic setting and redox sensitivity using V/Mo values indicate that hydrothermal sediments put on reduction environment after precipitation, before being affected by metamorphism and intrusion activity. Geochemical data are plotted on a distal trend of SEDEX-type with discrimination plot using SEDEX index. As a result, petrological-geochemical properties demonstrate that Dyusembay Pb-Zn mineralized zone is comparable to distal-type of SEDEX deposit.

• Economic and Environmental Geology
• /
• v.47 no.2
• /
• pp.181-191
• /
• 2014

Olon Ovoot gold mine, Mongolia, is located in the Omnogobi province which is south 500 km from Ulaanbaatar. The mine area consists of the Devonian Bot-Uul khudag formation, the Upper Devonian intrusions, and the Upper Devonian or the Early Jurassic quartz veins. The quartz veins contain from 1 to 32 g/t gold with an average of 5 g/t gold. The quartz veins vary from 0.2 m to 25 m and are concordant or discordant with foliation of the green-schist. The mineralogy of the quartz veins is simple and consists of mainly of white massive quartz with partly transparent quartz in cavity. Quartz, sericite, chlorite, pyrite and carbonates(ankerite, dolomite and siderite) were observed in the alteration zone. Carbonate minerals occur as disseminated, coarse or fine grains with quartz, sericite, chlorite and pyrite near vein margin or within wall-rock xenoliths in quartz vein. Ankerite is present as later dark grey ankerite(13.51 to 16.89 wt.% FeO) and early white grey ankerite(16.67 to 19.90 wt.% FeO). The FeO contents of early ankerite are higher than those of later ankerite. Dolomite contains from 3.89 to 10.44 wt.% FeO and from 0.10 to 0.47 wt.% MnO. Dolomite is present as dark grey dolomite(4.06 to 6.87 wt.% FeO), light white grey dolomite(6.74 to 7.58 wt.% FeO) and grey white dolomite(7.33 to 10.44 wt.% FeO). The FeO contents of white grey dolomite are higher than those of dark grey dolomite. Siderite contains from 34.25 to 48.66 wt.% FeO, from 6.79 to 14.38 wt.% MgO, from 0.06 to 0.26 wt.% MnO and from 2.08 to 8.08 wt.% CaO.