• Journal of the Korean Society of Radiology
• /
• 제14권5호
• /
• pp.619-626
• /
• 2020

This study aimed to identify the error rates in Catheter Calibration Mode, Auto Calibration Mode, and Segment Calibration Mode among many calibration modes as a quantitative evaluation tool used for predicting the diameter and length of balloon or stent in percutaneous intravascular balloon dilatation or stent insertion. Our experiment was conducted with Copper Wire of 2 mm × 80 mm (diameter × length) manufactured elaborately for quantitative evaluation in calibration and Metal Ball of 5, 10, 15, 30, and 40 mm and Acryl Phantom of 25 mm, 50 mm, 75mm, 100 mm, 125 mm, 150mm, 175 mm, and 200 mm. At each height, subtraction images were acquired with a cineangiograph and Stenosis Analysis Tool as a software provided by the equipment company was used for measurement. To evaluate the error rates in Catheter Calibration Mode, Copper Wire was put on each acryl phantom before shooting. Copper Wire of 2 mm in diameter was set as a diameter for catheter, and Copper Wire of 8 mm in length was measured with Multi-segments. As a result, the error rates appeared at 1.13 ~ 5.63%. To evaluate the error rates in Auto Calibration Mode, the height of acryl was entered at each height of acryl phantom and the length of 8 mm Copper Wire was measured with Multi-segments and as a result, the error rates appeared at 0 ~ 0.26%. To evaluate the error rates in Segment Calibration Mode, each metal ball on the floor of table was calibrated and the length of 8 mm Copper Wire on each acryl phantom was measured and the length of 8 mm Copper Wire depending on the changes of acryl phantom height was measured with Mutli-segments and as a result, the error rates appeared at 1.05 ~ 19.04%. And in the experiment on OID changes in Auto Calibration Mode, the height of acryl phantom was fixed at 100mm and OID only changed within the range of 450 mm ~ 600 mm and as a result, the error rates appeared at 0.13 ~ 0.38%. In conclusion, it was found that entering the height values in Auto Calibration Mode, among these Calibration Modes for evaluating quantitative vascular dimensions provided by the software was the calibration method with the least error rates and it is thus considered that for calibration using a metal ball or other objects, putting them in the same height as that of treatment sites before calibrating is the method that can reduce the error rates the most.

• Journal of Environmental Impact Assessment
• /
• 제28권5호
• /
• pp.427-439
• /
• 2019

Natural environmental ecology ofthe environmental impact assessment(EIA)is very much lacking in quantitative evaluation. Thus, this study attempted to evaluate quantitative assessment for ecosystem service in the site of Eco-delta project in Busan. As a part of climate change adaptation, this study evaluated and compared with the value for carbon fixation and habitat quality using the InVEST model before and after development with three alternatives of land-use change. Carbon fixation showed 216,674.48 Mg of C (year 2000), and 203,474.25 Mg of C (year 2015)reducing about 6.1%, and in the future of year 2030 the value was dropped to 120,490.84 Mg of C which is 40% lower than year 2015. Alternative 3 of land use planning was the best in terms of carbon fixation showing 6,811.31 Mg of C. Habitat quality also changed from 0.57 (year 2000), 0.35 (year 2015), and 0.21 (year 2030) with continued degradation as development goes further. Alternative 3 also was the highest with 0.21(Alternative 1 : 0.20, Alternative 2 : 0.18). In conclusion,this study illustrated that quantitative method forland use change in the process of EIA can helpdecision making for stakeholders anddevelopers with serving the best scenario forlow impact of carbon. Also it can help better for land use plan, greenhouse gas and natural environmental assets in EIA. This study could be able to use in the environmental policy with numerical data of ecosystem and prediction. Supplemented with detailed analysis and accessibility of basic data, this method will make it possible for wide application in the ecosystem evaluation.

• Journal of Korea Spatial Information System Society
• /
• 제10권4호
• /
• pp.27-35
• /
• 2008

Current re-arrangement of rivers and waterways have been made uniformly ignoring characteristics of individual rivers thereby aggravating artificial river restructuring. On the contrary, quantitative techniques to evaluate the aftermath of artificial river disturbance such as uprising of river bed, intrusion of foreign fisheries, and changes of ecological habitats are not available. To establish such quantitative techniques, analysis of the river changes to evaluate the major causes of the river disturbance and its impacts is essential. Therefore, research for proposing a method which can be applied for the development of techniques to investigate river disturbance according to the major factors for the domestic rivers using airphotos and GIS techniques was preceded. In this study, the study area on the downstream of the river was selected and analysis of river disturbance using preceding method was done to confirm the benefit of analyzing river disturbance using GIS techniques. Trend analysis of the waterway sinuosity and changes of the flow path leaded to detailed verification of the river disturbance for specific location or time period, and this enabled to generate relatively accurate numbers representing sinuosity of the waterway and relevant changes. Also, it is possible to predict the effect on the current re-arrangement of the river and waterway to river flow using the analysis of past river change. It is necessary to establish GIS based proper measures for environmental river restoration using the results from this study and future works.

• Journal of Energy Engineering
• /
• 제21권4호
• /
• pp.339-345
• /
• 2012

RMembrane LNG storage tanks have been recently investigated to replace full-containment LNG storage tanks because of safety and cost aspects. Quantitative Risk Analysis (QRA) and Finite Element Method (FEM) were used to evaluate safety of membrane LNG storage tanks. In this study, structural safety evaluation results via FEM analysis showed that both membrane type and full-containment type cryogenic LNG storage tanks with 140,000 $m^3$ capacity were equivalently safe in terms of strength safety and leakage safety of a storage tank system. Also, Fault Tree Analysis (FTA) was used to improve the safety of membrane LNG storage tanks and membrane LNG tanks were modified by adding three safety equipments: impact absorber structure for the low part of the membrane, the secondary barrier to diminish the thermal stress of the corner part of the outer tank, and a pump catcher in case of falling of a pump. Consequently, the safety of the modified membrane LNG storage tanks were proved to be equivalent to that of full-containment LNG storage tanks.

• Korean Journal of Community Nutrition
• /
• 제14권5호
• /
• pp.590-599
• /
• 2009

The purpose of this study was to analyze the relationship of nutritional status measured by the body composition and dietary nutrients intakes with calcaneal broadband ultrasound attenuation in college students. Total of 886 (462 male and 424 female) students who received health examination in May 2007 participated in this research. Participants bone status was measured by a quantitative ultrasound method and t-score was calculated via WHO guideline. For body composition measurements, body fat, height and weight were measured and BMI was calculated. Dietary data were collected by a 24-hour recall method. Based on Asia-Pacific standard of WHO, BMI was divided into 3 groups; UW (BMI < 18.5), NW + OW (18.5 $\leqq$ BMI < 25) and Obese group (25 $\leqq$ BMI). Among male students, 2.4% belong to the UW group, 45.0% to the NW+OW group and 52.6% belong to the obese group, bwhile 10.4% of female students belong to the UW group, 71.9% to the NW + OW group and 17.7% of female students belong to the Obese group. Differences among male and female students were statistically significant (p < 0.001). Students with higher BMI showed significantly higher bone health status. Male students did not show any significant differences in nutrients intakes by BMI groups while female students showed the higher intakes of energy, protein, pyridoxin, phosphorus, iron and zinc among NW + OW group than other groups (p < 0.05). The qualitative and quantitative evaluation of diet by BMI groups did not show any significant differences in both male and female students. The result of the multiple regression analyses showed that the body fat and bone status was negatively related while energy intake was positively related with the bone status. These results revealed that bone health status was positively affected by BMI but not by body fat. In conclusion, among those who are at their twenties, the period when the bone density becomes maximized, body fat may negatively affect bone health unlike during other life cycle stages.

• The Journal of the Korean dental association
• /
• 제55권6호
• /
• pp.413-422
• /
• 2017

Purpose: The aim of this study was to confirm the validity of the $Cariview^{TM}$, test in adults by assessing correlations between $Cariview^{TM}$, scores and caries experience using a quantitative light-induced fluorescence (QLF) technique. Methods: This retrospective cross-sectional study included 111 patients aged 19-64 years who visited a dental clinic in Seoul from 2015 to 2016, and underwent the $Cariview^{TM}$, test and had their teeth photographed with the Qraycam. Plaque was scraped with sterilized cotton swabs, and then placed in a culture medium and incubated at $37^{\circ}C$ for 48 h. Finally, the degree of color change was evaluated, and scored on a 0-100 point scale. Caries experience index included not only cavitated lesions but also early caries that were detected on white and fluorescence images. Participants were divided into low, moderate and high caries risk groups according to the $Cariview^{TM}$, score, and caries experience was compared between risk groups using ANCOVA. Spearman correlation coefficients were calculated to analyze the associations between $Cariview^{TM}$, scores and caries indices. Result: The mean age of the participants was 40 years, and the mean $Cariview^{TM}$, score was $53.6{\pm}20.7$. The WDMFT and the DMFT indices significantly increased with caries risk, and this increase was significantly different between the low- and high-risk groups. The $Cariview^{TM}$, test scores were significantly correlated with the WDMFT (r = 0.28, P = 0.003) and DMFT (r = 0.29, P = 0.002) indices. Conclusion: The $Cariview^{TM}$, test could be a clinically useful and simple method for assessing caries risk in adults.

• The Journal of Industrial Distribution & Business
• /
• 제9권11호
• /
• pp.39-54
• /
• 2018

Purpose - To success, in spite of deficient resources, a start-up company has to check various circumstances. Many researchers proposed different appraisal methods for technology commercialization. But everybody agrees Merrifield is the first one, who is a pioneer of an appraisal model of technology commercialization. After he proposed it, many researchers and field workers developed a more complicated model, which called a BMO model. In this research, considering the circumstances of start-ups that lack available resources, it proposes a new appraisal method for technology commercialization, which is named a weighted-BMO model. Research design, data, and methology - For the new BMO-model, it studied the preceding studies. And it found that the success factors for start-ups were correlated with technology commercialization. After comparing the success factors for technology commercialization of start-ups with BMO appraisal factor, it withdraws the net BMO appraisal model: which we are calling the weighted-BMO model. Results - This study found a few things. First, actually, the BMO appraisal factors related with the success factors of technology commercialization. Second, the weighted-BMO model, which included the entrepreneur ability factor, was more accurately estimated the success of technology-based start-ups than the BMO model. Third, it overcame the weakness of the BMO-model, which did not include quantitative factors. In addition to evaluating the feasibility of the BMO model, we also presented a strategy for the future direction. But, still, it included a few shortcomings, which we are calling the arbitrage of weighted value. Sometimes, the intentional weighted value can deliberate the different valuation. Conclusitons - Due to this study, the weighted-BMO model included appraisal factors related with the success factors of technology commercialization and the entrepreneur ability factor, and quantitative factors. When evaluating the combined score of the existing Merrified BMO components, 35 points of the first pass criterion accounted for 29.17% of the total score, and 80 points of the merit score of the second rank criterion were 66.67% Considering that the weighted sum is taken into account, the baseline score of the weighted summing method for each component of the modified BMO model is 2.92 points, which is 29.17% of the weighted sum total of 10 points. The evaluation score was 6.67 points, 66.67% of the weighted total score of 10 points.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제24권4호
• /
• pp.155-165
• /
• 2024

Software as a Service (SaaS) has become one of the fastest-growing software business models in recent years. Even during the economic downturn following the pandemic, the SaaS business has emerged as a crucial model for IT companies. The revenue structure of SaaS, which is based on the subscription economy model, ensures that users pay only for the services used. In other words, SaaS operates on a subscription-based billing model, thus providing subscribers access to software uploaded to cloud computers via the Internet. This study aimed to explore the manner by which software-solution firms have to counteract the decline in profit and loss sales caused by changing their business-model orientation from on-premise deployment software to subscription-based software. Additionally it analyzes a method for selecting a subscription-based pricing model and rapidly recovering the investment costs via quantitative business-viability assessment. By calculating subscription fees via a more quantitative business-viability evaluation instead of focusing on conventional business-planning methods that rely on qualitative methods, companies are expected to be equipped in providing services to customers at reasonable costs. This strategy will facilitate them in leading emerging growth sectors.

• Journal of Korea Technology Innovation Society
• /
• 제10권3호
• /
• pp.580-603
• /
• 2007

This paper examines accountability trend for government supported research institutes through the analysis of what aspects of accountability have been emphasized in the institute evaluation from 1991 to 2005. We divided research period into pre-research council period(1991-1998) and post-research council period(1999-2005). In pre-research council period, we find four kinds of accountability for government supported research institutes, that is, compliance accountability for regulation, managerial accountability, performance accountability and social accountability and great emphasis has been put on compliance accountability for regulation and managerial accountability. In post-research council period, financial accountability for soundness has been added to the above four kinds of accountability and great emphasis has been put on performance accountability and managerial accountability, especially performance accountability. The concrete contents of an accountability has been also changed between pre-research council period(1991-1998) and post-research council period(1999-2005). Regulation accountability in the pre-research council period are related to conforming to government rules for institute operation and regulation defining institute function for reformulation, but in post-research council period, it has been focused on rules for the rationalization of management. Managerial accountability has been changed from emphasizing on management efficiency approximately to focusing on more specific management efficiency like the appropriateness of personnel management, the efficiency of budget management and project management, reasonableness of evaluation and compensation. Performance accountability has been changed in methods for measuring performance, in the pre-research council period, it has been taken quantitative method for measuring productivity, but, in post-research council period, qualitative approach like objective management has been complemented. Finally, accountability for government supported research institutes has been changed towards being concrete in many sided accountabilities and focusing on performance accountability.

• Ecology and Resilient Infrastructure
• /
• 제4권4호
• /
• pp.187-192
• /
• 2017

This study evaluated the reduction performance of ambient temperature and the amount of evaporation that takes place depends on the temperature difference of paving blocks which are used in the sidewalk, roadway, parking lot, park, plaza, and etc. The water-retentive block of the LID (Low Impact Development) practice was compared with the conventional concrete block. For the quantitative performance evaluation, experiments were performed in a climatic environment chamber capable of controlling the climatic environment (solar radiation, temperature, humidity, rainfall, and snowfall). The method for performance evaluation was proposed using temperature, humidity, and ambient air of paving blocks which changes according to the solar radiation and the wind speed after the rainfall. As a result, the evaporation amount of the water-retentive block was 2.6 times higher than that of the concrete block, the surface temperature of water-retentive block was $10^{\circ}C$ lower than the concrete block, and the air temperature of water-retentive block was $4.6^{\circ}C$ lower than the concrete block. Therefore, it is analyzed that the water-retentive block with a large amount of evaporation is more effective in reducing the urban heat island phenomenon as compared with the concrete block.