• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.39-46
• /
• 2010

In 2007, Iowa department of transportation (DOT) initiated to run the falling weight deflectometer (FWD) network-level testing along Iowa highway and road systems and to build a comprehensive database of deflection data and subsequent structural analysis, which are used for detecting pavement structure failure, estimating expected life, and calculating overlay requirements over a desired design life. Iowa's current FWD networklevel testing protocol requires that pavements are tested at three-drop level with 8-deflection basin collected at each drop level. The test point is determined by the length of the tested pavement section. However, the current FWD network-level program could cover about 20% of Iowa's highway and road systems annually. Therefore, the current FWD network-level test protocol should be simplified to test more than 20% of Iowa's highway and road systems for the network-level test annually. The main objective of this research is to investigate if the minimum number of drop levels and test points could be reduced to increase the testing production rate and reduce the cost of testing and traffic control without sacrificing the quality of the FWD data. Based upon the limited FWD network-level test data of eighty-three composite pavement sections, there was no significant difference between the mean values of three different response parameters when the number of drop levels and test points were reduced from the current FWD network-level testing protocol. As a result, the production rate of FWD tests would increase and the cost of testing and traffic control would be decreased without sacrificing the quality of the FWD data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3885-3892
• /
• 2010

Safety-Critical systems, such as Plant Protection Systems in nuclear power plant, plays a key role that the facilities can be operated without undue risk to the health and safety of public and environment, and those systems shall be designed, fabricated, installed, and tested to quality standards commensurate with the importance of the functions to be performed. Computer-based Instrumentation and Control Systems to perform the safety-critical function have Real Time Operating Systems to control and monitoring the sub-system and executing the application software. The safety-critical Real Time Operating Systems shall be designed, analyzed, tested and evaluated to have capability to maintain a high integrity and quality. However, local nuclear power plants have applied the real time operating systems on safety critical systems through Commercial Grade Item Dedication method, and this is the reason of lack of detailed methodology on assessing the safety of real time operating systems, expecially to the new developed one. This paper presents the methodology and experiences of safety evaluation on safety-critical Real Time Operating Systems based upon design requirements. This paper may useful to develop and evaluate the safety-critical Real Time Operating Systems in other industry to ensure the safety of public and environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1447-1454
• /
• 2017

The realtime test data topic means that process for the data efficiently from many kinds of measurement device at the test range. There are many measurement devices in test range. The test range require accurate observation and determine on test object. In this realtime test data slaving framework system, the system can produce variety of test informations and all these data also must be transmitted to test information management or display system in realtime. Using RTI DDS(Data Distribution Service) middle ware Ver 5.2, we can product the efficiency of system usability and QoS(Quality of Service) requirements. So the application user enables to concentrate on applications, not middle ware. As the reason, Complex function is provided by the DDS, not the application such as Visualization Software. In this paper, I suggest the realtime test data topic on slaving framework of realtime test data based on DDS at the test range system.

• Journal of Korean Society for Quality Management
• /
• v.41 no.4
• /
• pp.725-735
• /
• 2013

Purpose: The purpose of this study is to propose an Integrated Safety Evaluation Process (ISEP) that can enhances the safety aspect of the safety-critical system. This process utilizes the advantages of the iterative Systems Engineering process combined with the safety assessment process that is commonly and well defined in many standards and/or guidelines for railway, aerospace, and other safety-critical systems. Methods: The proposed process model is based on the predefined system lifecycle, in each phase of which the appropriate safety assessment activities and the safety data are identified. The interfaces between Systems Engineering process and the safety assessment process are identified before the two processes are integrated. For the integration, the elements at lower level of Systems Engineering process are combined with the relevant elements of safety assessment process. This combined process model is represented as Enhanced Functional Flow Block Diagram (EFFBD) by using CORE(R) that is commercial modelling tool. Results: The proposed model is applied to the lifecycle and management process of the United States aircraft system. The US aircraft systems engineering process are composed of twelve key elements, among which the requirements management, functional analysis, and Synthesis processes are considered for examplenary application of the proposed process. To synchronize the Systems Engineering process and the safety assessment process, the Systems Engineering milestones are utilized, where the US aircraft system has thirteen milestones. Taking into account of the nine steps in the maturity level, the integrated process models are proposed in some phases of lifecycle. The flows of processes are simulated using CORE(R), confirming the flows are timelined without any conflict between the Systems Engineering process and the safety assessment process. Conclusion: ISEP allows the timeline analysis for identifying activity and data flows. Also, the use of CORE(R) is shown to be effective in the management and change of process data, which helps for the ISEP to apply for the development of safety critical system. In this study, only the first few phases of lifecyle are considered, however, the implementation through operation phases can be revised by combining the elements of safety activities regarding those phases.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.1
• /
• pp.144-155
• /
• 1996

During the 1990s the workplace has grown more complex and business competition has increased world-wide. All organizations, whether for-profit or non-profit have been forced to respond to market changes. More advanced information and technology, greater product diversity, shorter product life cycles, increased quality requirements, more regulation oversight, decreasing productivity, more competitors, and increasing overhead costs have motivated organizations to focus on ways to deliver products cheaper, better, and faster. Many organizations are searching for ways to reduce costs through downsizing, reengineering business processes, implementing quality management, outsourcing, and improving cost management. Support departments that provide services internal to an organization such as human resources, legal, and environmental, safety, and health (ES&H) are often the first organization targeted for cost reduction and cost control initiatives because these functions are part of a rapidly increasing overhead cost. Recently, ES&H functions are incresingly being integrated into the business of business to contribute value to organization beyond mere compliance with ES&H regulations. The discussions and development of the ISO compatible Environmental Management Standards or Occupational Safety and Health Management Standards is another impetus to integrate ES&H function into the business of business. Thus, ES&H professional need new skills to analyze the cost of their function and communicate the value of the products and services they provide. In recent years, the need for and the importance developing cost management and business skills by ES&H professionals have been emphasized in the literature. Communicating with decision makers in terms of cost and value to the organization, and by using business language and business arguments is the first step toward effectively integrating ES&H activities into the business of business. Activity-based costing (ABC) is a cost management method that measures the cost of a product or service based on the actual use of resources by activities, and based on the actual amount of activities used to produce a product or service. ABC is recommended as a tool for managers of ES&H organizations to determine the cost of developing and providing ES&H products within a for-profit firm or non-profit agency. This paper discusses the trend of integration of ES&H functions into the mainstream of business activities within an organization. The general principles of treditional cost accounting are presented as a bases for understandging why and how ABC will provide more accurate estimates of cost. The principles and concepts of ABS are presented as a tool for determining more accurately the true cost of ES&H products and services.

• Korean Journal of Community Nutrition
• /
• v.14 no.3
• /
• pp.327-339
• /
• 2009

It is known that Korean pregnant women take iron supplements at a higher than the recommended level. This study was designed to provide data on current iron intake levels both from food sources and supplement to better guide iron supplement use during pregnancy. We also explored associations of iron supplement intake levels with various sociocultural factors and pregnancy outcomes. Dietary intakes of 510 pregnant women were assessed by a validated 102-item food frequency questionnaire, and information on types and amounts of nutritional supplement intakes were also attained. While dietary intake levels of most nutrients exceeded the KDRIs (Korea Dietary Reference Intakes: EAR: Estimated Average Requirements), folate fell short of the KDRIs. A total of 428 women (83.9%) reported to take iron supplement. The pregnant women were divided into the three groups (group I: Fe supplement intake ${\le}$ EAR, group II: EAR < Fe supplement intake ${\le}$ 3 times of EAR, group III: 3 times of EAR < Fe supplement intake). The mean dietary intake of iron was 24% of the total iron intake for pregnant women. Iron intake from food was not significantly different among I, II, and III. In case of iron intake from supplements, the most frequent dose (34.1%) was 90-100 mg/day, and the mean iron supplement intake was 362% of the EAR. The study findings showed that those with higher levels of iron supplements had better meal quality measured by NAR (Nutrient Adequacy Ratio) and INQ (Index of Nutrient Quality). In addition iron supplement intake levels were significantly related to age (20s: 66.5 ${\pm}$ 38.6 mg/day, 30s: 77.3 ${\pm}$ 47.8 mg/day, p < 0.0116) and experience of childbirth (1st pregnancy: 70.9 ${\pm}$ 41.2 mg/day, 2nd pregnancy: 64.5 ${\pm}$ 39.5 mg/day, ${\ge}$ 3rd pregnancy: 94.4 ${\pm}$ 63.8 mg/day, p < 0.005). However, no significant difference was found between iron supplement intake levels and various pregnancy outcomes including birth weight, birth height, gestational age, weight gain during pregnancy, and jaundice. It is worrisome that iron intake by supplement use greatly exceeded the EAR, suggesting the need of appropriate guidelines for iron supplement intake during pregnancy. Thus iron overdose from supplements in pregnancy should be considered as a serious condition.

• Journal of KIISE:Software and Applications
• /
• v.36 no.5
• /
• pp.353-360
• /
• 2009

Software, once developed, has a long life and evolves through numerous additions and modifications because of the faults, the changes in user requirements, the changes in environments, and so forth. With the evolution of the software, assuring the quality of the software is getting more difficult because of numerous versions of the software. Meanwhile, regression testing has been used to support the software testing activities and assure acquiring appropriate quality through several versions of software. Regression testing, however, is too expensive because it requires lots of test cases executions and the number of test cases increases sharply as the software evolves. For this reason, several techniques are suggested to help conducting regression testing then test case prioritization technique is understood the most effective and efficient technique to support regression testing. In this paper, we propose an approach, Historical Value-Based Approach, which is based on the use of historical information to estimate the current cost and fault severity for cost-cognizant test case prioritization. As a result of the proposed approach, software testers who perform regression testing prioritize their test cases more effectively so that the test effectiveness of them can be improved in terms of APFDc.

• Journal of Nutrition and Health
• /
• v.30 no.10
• /
• pp.1244-1257
• /
• 1997

The goals of the School Lunch Program(SLP) are to provide school children with approximately one -third of their daily nutrition requirements at a reasonable price, to foster good food habits, and to contribute to a better understanding of nutrition. In order to provide guidelines and appropriate nutritional information for SLP planning, and to identify inexpensive sources of each nutrient, representative SLP menus were analyzed for nutrient density using the Index of Nutritional Quality(INQ) and for nutrient cost. Recipes and prices of 776 meals were collected from 10 SLP primary schools in Seoul and Kyunggi province in Korea during 1995. From 4829 menu items in 776 meals, the 100 most frequently used menus were selected as representative SLP menus. From these 100 menus, eleven categories of menu were identified according to cooking methods and ingredients. Selected menus were placed into these 11 groups, with 3 to 5 menus in each except the milk group which contained only milk. The mean nutrient content, INQs, and nutrient-cost ratios were calculated for each menu and menu group. Among the 100 representative SLP menus, 'Jiajang-rice' contained the highest energy per serving portion. 'Grilled pollack ' was the highest in protein, 'Seasoned spinach ' in vitamin A, 'Spagehetti' in vitamin B1 , niacin and iron, 'Kongjorim'(hard-boiled bean with sauce) in vitamin B2 , strawberry in vitamin C, and 'fish stew ' and milk in calcium. Among the 11 menu groups, the 'One-dish' group was found to be the highest in energy , protein, vitamin A, B$_1$ and iron. The milk group was a good source of vitamin B$_2$ and calcium . The meat side dish group (panbroiled, fried or steamed )was the most suitable for providing niacin. The fruit group provided the highest level of vitamin c per portion. The nutrient densities(INQs) were found in the soup group (protein), Kimchi group(vitamin A), fruit group(vitamin B$_1$ and C), milk group(vitamin B$_2$ and calcium), stew group(niacin )and vegetable side dish group(energy, protein, vitamin B$_1$ and niacin) , vegetable side dish group(vitamin A), milk group(vitamin B$_2$ and calcium) , fruit and Kimchi groups(vitamin C), and stew group(iron). This information should be useful for school dietitians in planning most nutritious SLP menus with limited budgets. It could also be used for basic guidelines in nutrition education, and for future improvement of the SLP in Korea.

• KIISE Transactions on Computing Practices
• /
• v.23 no.6
• /
• pp.359-370
• /
• 2017

In overseas-hospital construction, the digital hospital is a trend that is based on the developments of the information and communication technologies, state-of-the-art medical equipment, smart health, and telemedicine. Along with the increasing proportion of IT, this has resulted in the spreading of the concept throughout city-like hospitals and their transformation into digital hospitals. In the hospital-construction business, IT is a key element that will link the modernization of the mechanical, electrical, and equipment systems, construction, and medical equipment for efficiency maximization through integration. The purpose of this study is the analysis of the market-expansion success factors through the construction of a success-story-based, IT-driven overseas-hospital business. The digital-hospital concept and the development process are analyzed through a literature review, and the success factors are analyzed in terms of the cost, time, and quality that are proposed in the project-management body of knowledge. The main contributions of this study regarding the success factors are as follows: First, a cost-side need exists regarding the establishment of strategic-value engineering in terms of increasing the value from the perspectives of the IT and operational infrastructures; second, in terms of the construction time, all of the hospital systems must comply with the established deadlines for the integrated test and commissioning; and lastly, in terms of quality, it is important to ensure that the System Integration digital-hospital services are delivered according to the user requirements.

• The Journal of Korean Association of Computer Education
• /
• v.9 no.5
• /
• pp.65-75
• /
• 2006

With rapid developments in technology and communications' many teachers are increasingly exposed to a variety of e-Learning environments that they must develop new competencies and skills to be successful e-Learning teachers. The purpose of this training program, sponsored by HRD Korea (Human Resources Development Services of Korea), is to provide e-Learning teachers with meaningful opportunities for promoting quality e-Learning teaching. This program covers pedagogical issues as well as technical and practical aspects of the e-Learning environments. Before starting the program development the survey and the current e-Learning program assessments were conducted. The training program is divided into three modules as follows: 1) theoretical issues of e-Learning, 2) development of e-Learning contents, and 3) implementation of e-Learning environments. These three modules can be selectively reorganized in response to teacher requirements and demands. ln each module, there are five subtopics that include creative teaching and interaction strategies for promoting the effective e-Learning teaching. ln conclusion, teachers will gain greater understanding of teacher roles in e-Learning instruction, more flexibility in teaching jobs, increased confidence and knowledge to act as e-Learning facilitators through the completion of this training program.